Engine-Codes
 
OBDII Code List
 
P1506 2000 FORD F150

P1506 2000 FORD F150 - Idle Air Control Overspeed Error

Repair Importance Level: 3/3
Repair Difficulty Level: 2/3  What does this mean?

P1506 2000 FORD F150 Possible Causes

  • Faulty Idle Air Control (IAC) valve
  • IAC valve harness is open or shorted
  • IAC valve circuit poor electrical connection
  • Intake leaks
  • Stuck PCV Valve

First diagnose P1506 2000 FORD F150 code

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.

P1506 2000 FORD F150 Tech Notes

The P1506 code means that the engine idle is out of factory specification. Sometimes the Idle Air Control (IAC) may have carbon built up. Disconnect the car battery, remove the valve, clean, re-install valve, and drive the vehicle for about 5 minutes with the headlights and A/C ON to get the idle relearned.
Also, check for intake leaks or stuck PCV Valve.
If the problem persistss, the IAC valve may need to be replaced.

Cost of diagnosing the P1506 2000 FORD F150 code

    Labor: 1.0

    The cost of diagnosing the P1506 2000 FORD F150 code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1506 2000 FORD F150 code detected?

The P1506 code sets when the Powertrain Control Module (PCM) detects an engine idle speed that is greater than the desired RPM.

P1506 2000 FORD F150 Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1506 2000 FORD F150 Meaning

The Idle Air Control Valve (IACV) valve assembly controls the engine idle speed and provides a dashpot function. The IAC valve assembly meters intake air around the throttle plate through a bypass within the IAC valve assembly and throttle body. The Powertrain Control Module (PCM) determines the desired idle speed or bypass air and signals the IAC valve assembly through a specified duty cycle. The IAC valve responds by positioning the IAC valve to control the amount of bypassed air. The PCM monitors engine RPM and increases or decreases the IAC duty cycle in order to achieve the desired RPM.
OBDII Code P1506 2000 FORD F150 - Idle Air Control Overspeed Error - Engine-Codes.com

P1506 2000 FORD F150 More Information

Need more information on how to fix the P1506 2000 FORD F150 code?
Get Access to Factory Service Manuals

Related Information