P1502 2007 Ford Fusion Code - Vehicle Speed Sensor Intermittent
Quick Answer
The P1502 diagnostic trouble code for a 2007 Ford Fusion indicates an intermittent issue with the vehicle speed sensor. Common causes include Faulty vehicle speed sensor, Damaged wiring or connectors, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1502 2007 Ford Fusion indicates Vehicle Speed Sensor Intermittent.
- Common causes
- Common causes include Faulty vehicle speed sensor, Damaged wiring or connectors, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1502 2007 Ford Fusion Description
The P1502 diagnostic trouble code for a 2007 Ford Fusion indicates an intermittent issue with the vehicle speed sensor. The vehicle speed sensor (VSS) is a crucial component that monitors the speed of the vehicle and sends this information to the engine control module (ECM) to assist in various functions such as shifting gears, controlling fuel injection, and regulating the speedometer. When the ECM detects an intermittent signal from the VSS, it triggers the P1502 code, signaling a problem that needs attention.
Common Causes of P1502 2007 Ford Fusion
- Faulty vehicle speed sensor
- Damaged wiring or connectors
- Malfunctioning ECM
- Issues with the reluctor ring or tone wheel
- Corrosion or debris affecting sensor signal
Symptoms of P1502 2007 Ford Fusion
- Inaccurate speedometer readings
- Erratic shifting or transmission problems
- Loss of power or acceleration
- Check Engine Light illuminated
- Vehicle going into limp mode
How to Fix P1502 2007 Ford Fusion
- Begin by conducting a thorough diagnostic scan to confirm the P1502 code and pinpoint the exact cause of the issue.
- Inspect the vehicle speed sensor, wiring, and connectors for any visible damage or corrosion. Replace or repair as necessary.
- Test the ECM to ensure it is functioning correctly and communicating with the VSS properly.
- Check the reluctor ring or tone wheel for any damage or misalignment that could be affecting the sensor's readings.
- Clear the trouble code from the ECM's memory and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P1502 2007 Ford Fusion
The typical repair costs for addressing a P1502 code on a 2007 Ford Fusion can vary depending on the specific cause of the issue. In general, replacing a faulty vehicle speed sensor can cost between $100 and $200, while addressing wiring or connector issues may range from $50 to $150. If the ECM needs to be replaced, this can add an additional $200 to $500 to the repair costs. Labor rates at auto repair shops can range from $80 to $150 per hour, so it's advisable to check with local shops for a more accurate estimate based on your location and vehicle specifics.
When is the Code Detected?
Need more information about the P1502 2007 Ford Fusion code?
Need more information on how to fix the P1502 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1502 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1502 2007 Ford Fusion Code
1. What does the OBDII code P1502 mean on a 2007 Ford Fusion?
P1502 indicates an intermittent issue with the Vehicle Speed Sensor (VSS), meaning the sensor may not be consistently sending signals to the car's computer.
2. What are the symptoms of code P1502 in a 2007 Ford Fusion?
Common symptoms include erratic speedometer readings, harsh or delayed shifting, poor acceleration, and potentially triggering the check engine light.
3. What causes the P1502 code in a Ford Fusion?
The code can be caused by a faulty Vehicle Speed Sensor, damaged wiring or connectors, a malfunctioning powertrain control module (PCM), or mechanical issues with the transmission.
4. Can I drive my 2007 Ford Fusion with a P1502 code?
While the car may still be drivable, it could experience performance issues, such as poor shifting or inconsistent speedometer readings, which may pose safety concerns.
5. How do I fix the P1502 code on my Ford Fusion?
Repairs usually include inspecting and replacing the Vehicle Speed Sensor, repairing damaged wiring or connectors, or reprogramming or replacing the PCM if needed.
6. How do I locate the Vehicle Speed Sensor on a 2007 Ford Fusion?
The Vehicle Speed Sensor is typically mounted on the transmission housing near the output shaft. Consult your vehicle’s repair manual for the exact location.
7. How much does it cost to repair code P1502 in a 2007 Ford Fusion?
The cost can vary, but replacing the Vehicle Speed Sensor typically ranges from $100 to $300, depending on labor rates and parts pricing.
8. Can a bad Vehicle Speed Sensor affect other systems in the car?
Yes, a faulty VSS can impact the transmission, ABS, and cruise control systems, as these rely on accurate speed data.
9. How can I test the Vehicle Speed Sensor on my Ford Fusion?
You can use a multimeter to check the sensor’s resistance and output voltage or use a diagnostic scan tool to monitor live data from the sensor.
10. Will clearing the P1502 code fix the issue?
Clearing the code will turn off the check engine light temporarily, but the issue will persist if the underlying problem is not resolved.
Discuss the causes and fixes for P1502 2007 Ford Fusion OBDII Code
Code P1502 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.