P14CD 2017 GMC Sierra Code - Fuel Pump Driver Control Module Configuration Command Signal 1 Message Counter Incorrect
Quick Answer
The P14CD diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is an issue with the Fuel Pump Driver Control Module Configuration Command Signal 1 Message Counter being incorrect. Common causes include Faulty Fuel Pump Driver Control Module, Wiring issues or loose connections, Software glitches or communication errors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P14CD 2017 GMC Sierra indicates Fuel Pump Driver Control Module Configuration Command Signal 1 Message Counter Incorrect.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Wiring issues or loose connections, Software glitches or communication errors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P14CD 2017 GMC Sierra Description
The P14CD diagnostic trouble code (DTC) for a 2017 GMC Sierra indicates that there is an issue with the Fuel Pump Driver Control Module Configuration Command Signal 1 Message Counter being incorrect. This module is responsible for controlling the fuel pump operation in the vehicle. When this signal counter is incorrect, it can lead to various performance issues and potentially cause the vehicle to stall or not start at all.
Common Causes of P14CD 2017 GMC Sierra
- Faulty Fuel Pump Driver Control Module.
- Wiring issues or loose connections.
- Software glitches or communication errors.
- Vehicle computer system malfunctions.
- Environmental factors such as extreme temperatures or moisture.
Symptoms of P14CD 2017 GMC Sierra
- Engine stalling or hesitation during acceleration.
- Difficulty starting the vehicle.
- Reduced fuel efficiency.
- Illumination of the check engine light.
- Rough idling or engine misfires.
How to Fix P14CD 2017 GMC Sierra
- Diagnose the issue using a diagnostic scanner to confirm the P14CD code.
- Inspect the wiring and connections related to the Fuel Pump Driver Control Module.
- Test the module for functionality and replace if necessary.
- Clear the DTC and reset the vehicle's computer system.
- Perform a test drive to ensure the issue has been resolved.
Cost to Fix P14CD 2017 GMC Sierra
The typical repair costs for addressing a P14CD code on a 2017 GMC Sierra can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's advisable to check local rates for a more precise estimate.
Need more information about the P14CD 2017 GMC Sierra code?
Need more information on how to fix the P14CD 2017 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P14CD 2017 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P14CD 2017 GMC Sierra Code
1. What does the OBDII code P14CD mean on a 2017 GMC Sierra?
P14CD indicates an issue with the Fuel Pump Driver Control Module (FPCM), specifically that the Configuration Command Signal 1 Message Counter is incorrect.
2. What are the common symptoms of code P14CD on a 2017 GMC Sierra?
Symptoms may include an illuminated check engine light, difficulty starting the engine, reduced engine performance, or stalling while driving.
3. What causes the P14CD code on a 2017 GMC Sierra?
Common causes include a faulty Fuel Pump Driver Control Module, wiring or connector issues, software glitches, or communication errors between the FPCM and the ECM.
4. Can I continue driving my 2017 GMC Sierra with the P14CD code?
It’s not recommended to drive with this code active, as it could lead to poor engine performance or potential stalling, which may be unsafe.
5. How do you diagnose the P14CD code on a 2017 GMC Sierra?
A mechanic will typically use a scan tool to check for related codes, inspect the FPCM and wiring for damage, and test the communication signals between the FPCM and ECM.
6. How is the P14CD code fixed on a 2017 GMC Sierra?
Repairs may involve reprogramming or replacing the FPCM, repairing damaged wiring or connectors, or updating the vehicle’s software.
7. Is the P14CD code a common problem for the 2017 GMC Sierra?
While not extremely common, it can occur, especially in vehicles with higher mileage or if there’s been damage to the fuel system wiring or components.
8. Does the P14CD code affect fuel efficiency on a 2017 GMC Sierra?
Yes, this code can lead to poor fuel delivery, which may reduce fuel efficiency and cause the engine to run inefficiently.
9. Do I need to replace the Fuel Pump Driver Control Module to fix code P14CD?
Not always. Sometimes, the issue can be resolved by repairing wiring or reprogramming the module, but replacement may be necessary if the module is defective.
10. How much does it cost to fix the P14CD code on a 2017 GMC Sierra?
Repair costs can range from $150 to $600, depending on whether the issue is with the wiring, reprogramming, or replacing the Fuel Pump Driver Control Module.
Discuss the causes and fixes for P14CD 2017 GMC Sierra OBDII Code
Code P14CD 2017 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.