P1480 Subaru Code - Cooling Fan Relay 1 Circuit High Input
Quick Answer
The P1480 code for Subaru vehicles indicates a problem with the Cooling Fan Relay 1 Circuit having a high input. Common causes include Faulty cooling fan relay, Wiring issues or shorts in the cooling fan circuit, Defective coolant temperature sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1480 Subaru indicates Cooling Fan Relay 1 Circuit High Input.
- Common causes
- Common causes include Faulty cooling fan relay, Wiring issues or shorts in the cooling fan circuit, Defective coolant temperature sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1480 Subaru Description
The P1480 code for Subaru vehicles indicates a problem with the Cooling Fan Relay 1 Circuit having a high input. This means that the Engine Control Module (ECM) has detected that the voltage signal from the cooling fan relay circuit is higher than the specified range. The cooling fan relay is responsible for activating the cooling fan to help regulate the engine's temperature. If this circuit is not functioning properly, it can lead to overheating issues, reduced engine performance, and potential damage to the engine components.
Common Causes of P1480 Subaru
- Faulty cooling fan relay
- Wiring issues or shorts in the cooling fan circuit
- Defective coolant temperature sensor
- ECM malfunction
- Cooling fan motor failure
Symptoms of P1480 Subaru
- Engine overheating
- Cooling fan not turning on
- Engine running hot at idle
- Loss of air conditioning performance
- Check Engine Light illuminated
How to Fix P1480 Subaru
- Begin by diagnosing the root cause of the issue using a scan tool to check for the specific fault code.
- Inspect the cooling fan relay and replace it if necessary.
- Check the wiring and connections in the cooling fan circuit for any damage or corrosion. Repair or replace as needed.
- Test the coolant temperature sensor and replace it if it is malfunctioning.
- If all components check out, the issue may lie with the ECM, requiring further diagnostics and potentially replacement.
Cost to Fix P1480 Subaru
The cost of repairing a P1480 code for a Subaru can vary depending on the specific cause of the issue. Typically, replacing a cooling fan relay can cost between $50 to $150, while addressing wiring or sensor issues can range from $100 to $300. If the ECM needs to be replaced, this can significantly increase the cost, potentially reaching up to $500 or more. Additionally, labor costs can vary, but typically range from $80 to $150 per hour. It's recommended to consult with a professional mechanic to get an accurate estimate based on your vehicle's specific needs.
Need more information about the P1480 Subaru code?
Need more information on how to fix the P1480 Subaru code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1480 Subaru code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1480 Subaru Code
1. What does the OBDII code P1480 mean in a Subaru?
P1480 indicates a "Cooling Fan Relay 1 Circuit High Input," meaning the engine control module (ECM) has detected a problem with the electrical circuit for the cooling fan relay.
2. What are the common symptoms of code P1480 in a Subaru?
Symptoms may include the check engine light turning on, engine overheating, the cooling fan not running, or the fan running continuously.
3. What causes the P1480 code to appear in a Subaru?
Common causes include a faulty cooling fan relay, damaged or corroded wiring, a blown fuse, or a malfunctioning ECM.
4. Can I drive my Subaru with the P1480 code?
It’s not recommended to drive with this code, as an inoperative cooling fan can cause engine overheating, potentially leading to severe engine damage.
5. How do I fix the P1480 code in a Subaru?
Repairs may involve replacing the cooling fan relay, repairing or replacing damaged wiring, checking and replacing a blown fuse, or in rare cases, addressing ECM issues.
6. How can I test the cooling fan relay for the P1480 code?
You can test the relay by swapping it with a known working relay of the same type or using a multimeter to check for continuity and proper operation.
7. What tools are needed to diagnose the P1480 code?
You’ll need a multimeter, a diagnostic scan tool, and potentially a wiring diagram for your Subaru to trace and test the circuit.
8. How much does it cost to repair a P1480 code in a Subaru?
Costs vary depending on the issue, but replacing a cooling fan relay typically costs $20–$50 for the part, plus labor if done professionally.
9. Can a bad battery cause the P1480 code in a Subaru?
While unlikely, a weak or failing battery can cause electrical issues that might indirectly affect the cooling fan circuit. It’s worth testing the battery as part of the diagnosis.
10. What should I check first when diagnosing the P1480 code?
Start by inspecting the cooling fan relay, fuse, and associated wiring for damage, corrosion, or loose connections. These are often the most common culprits.
Discuss the causes and fixes for P1480 Subaru OBDII Code
Code P1480 Subaru comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.