P1472 BMW Code - Diagnostic Module Tank Leakage Switching Solenoid Control Circuit Electrical
Quick Answer
The P1472 BMW code refers to an issue with the Diagnostic Module Tank Leakage Switching Solenoid Control Circuit Electrical. Common causes include Faulty switching solenoid, Damaged wiring or connectors in the control circuit, Malfunctioning diagnostic module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1472 BMW indicates Diagnostic Module Tank Leakage Switching Solenoid Control Circuit Electrical.
- Common causes
- Common causes include Faulty switching solenoid, Damaged wiring or connectors in the control circuit, Malfunctioning diagnostic module.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1472 BMW Description
The P1472 BMW code refers to an issue with the Diagnostic Module Tank Leakage Switching Solenoid Control Circuit Electrical. This code indicates a problem with the control circuit that manages the switching solenoid responsible for regulating the tank's leakage detection system. The tank leakage detection system is a crucial component in modern vehicles, as it helps to monitor and control fuel vapor emissions, ensuring compliance with environmental regulations.
Common Causes of P1472 BMW
- Faulty switching solenoid.
- Damaged wiring or connectors in the control circuit.
- Malfunctioning diagnostic module.
- Vacuum leaks in the fuel system.
- Contaminated fuel vapor canister.
Symptoms of P1472 BMW
- Check engine light illuminated on the dashboard.
- Decreased fuel efficiency.
- Strong fuel odor inside or outside the vehicle.
- Failed emissions test.
- Rough idling or stalling.
How to Fix P1472 BMW
- Perform a thorough diagnostic scan to confirm the P1472 BMW code and identify the specific component causing the issue.
- Inspect the switching solenoid, wiring, and connectors for any signs of damage or wear.
- Test the diagnostic module to ensure it is functioning correctly.
- Replace any faulty components, such as the switching solenoid or damaged wiring.
- Clear the diagnostic trouble codes and reset the check engine light to verify the repair's success.
Cost to Fix P1472 BMW
The typical repair costs for addressing the P1472 BMW code can range from $200 to $500, including parts and labor. However, it's important to note that the specific diagnosis time and labor rates at auto repair shops can vary significantly. Rates typically range between $80 and $150 per hour, depending on the location, vehicle make and model, and engine type. It's recommended to check with local auto repair shops for a more accurate estimate based on your specific circumstances.
Need more information about the P1472 BMW code?
Need more information on how to fix the P1472 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1472 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1472 BMW Code
What does OBDII code P1472 mean for a BMW?
P1472 indicates an issue in the Diagnostic Module Tank Leakage (DMTL) Switching Solenoid Control Circuit, which is part of the evaporative emissions control system.
What are the common symptoms of code P1472 in a BMW?
Symptoms may include an illuminated check engine light, failed emissions testing, and, in some cases, a slight fuel odor near the vehicle.
What causes the P1472 code to appear in a BMW?
Common causes include a faulty DMTL switching solenoid, damaged wiring or connectors in the solenoid circuit, or a malfunctioning DMTL pump.
Can I drive my BMW with the P1472 code?
While the car may remain drivable, it’s best to address the issue promptly, as it can affect emissions compliance and potentially lead to further system damage.
How do I diagnose the P1472 code on a BMW?
Diagnosis typically involves inspecting the wiring and connectors for damage, testing the DMTL solenoid for proper function, and checking the DMTL pump for faults.
What tools do I need to fix a P1472 code?
You may need an OBDII scanner, a multimeter for electrical testing, and basic hand tools to inspect and replace components.
How much does it cost to repair a P1472 code in a BMW?
Repair costs can vary but typically range from $100 to $300, depending on whether the issue is with the solenoid, wiring, or DMTL pump.
Can a faulty gas cap cause the P1472 code?
No, a faulty gas cap is unlikely to trigger P1472, as this code specifically relates to the DMTL solenoid control circuit.
How do I clear the P1472 code after repairs?
Use an OBDII scanner to clear the code after completing the necessary repairs. If the issue is resolved, the code should not return.
What happens if I ignore the P1472 code in my BMW?
Ignoring the code may result in reduced fuel efficiency, failed emissions tests, or further damage to the evaporative emissions control system.
Discuss the causes and fixes for P1472 BMW OBDII Code
Code P1472 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.