Engine-CodesAudi – P1472 Audi

P1472 Audi Code - EVAP Control System LDP Circuit Short To Ground

Quick Answer

The P1472 Audi code indicates a problem with the Evaporative Emission Control System LDP (Leak Detection Pump) circuit, specifically a short to ground. Common causes include Damaged Wiring: Frayed or damaged wiring in the LDP circuit can cause a short to ground, Faulty Leak Detection Pump: A malfunctioning LDP can also trigger the P1472 code, Corrosion: Corrosion or rust in the LDP circuit can create a short to ground. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1472 Audi indicates EVAP Control System LDP Circuit Short To Ground.
Common causes
Common causes include Damaged Wiring: Frayed or damaged wiring in the LDP circuit can cause a short to ground, Faulty Leak Detection Pump: A malfunctioning LDP can also trigger the P1472 code, Corrosion: Corrosion or rust in the LDP circuit can create a short to ground.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1472 Audi Description

The P1472 Audi code indicates a problem with the Evaporative Emission Control System LDP (Leak Detection Pump) circuit, specifically a short to ground. The Evaporative Emission Control System is responsible for capturing and storing fuel vapor that would otherwise be released into the atmosphere. The LDP is a vital component of this system, as it helps monitor and detect leaks in the system. A short to ground in the LDP circuit can disrupt the normal operation of the Evaporative Emission Control System, leading to potential issues with emissions control and fuel efficiency.

OBDII Code P1472 Audi - EVAP Control System LDP Circuit Short To Ground
P1472 Audi Code - EVAP Control System LDP Circuit Short To Ground

Common Causes of P1472 Audi

  1. Damaged Wiring: Frayed or damaged wiring in the LDP circuit can cause a short to ground.
  2. Faulty Leak Detection Pump: A malfunctioning LDP can also trigger the P1472 code.
  3. Corrosion: Corrosion or rust in the LDP circuit can create a short to ground.
  4. Loose Connections: Loose electrical connections in the LDP circuit can disrupt the system's operation.

Symptoms of P1472 Audi

  1. Check Engine Light: The most common symptom associated with the P1472 code is the illumination of the Check Engine Light on the vehicle's dashboard.
  2. Rough Idle: A short to ground in the LDP circuit can sometimes cause the engine to run rough or idle inconsistently.
  3. Decreased Fuel Efficiency: Issues with the Evaporative Emission Control System can lead to decreased fuel efficiency as the system may not be operating optimally.
  4. Failed Emissions Test: If the P1472 code is not addressed, the vehicle may fail an emissions test due to increased emissions.

How to Fix P1472 Audi

  1. Diagnose the Issue: Use an OBD-II scanner to retrieve the P1472 code and conduct a visual inspection of the LDP circuit to identify any obvious signs of damage or corrosion.
  2. Check Wiring: Inspect the wiring in the LDP circuit for any damage, fraying, or corrosion. Repair or replace any damaged wiring as needed.
  3. Test Leak Detection Pump: Test the LDP to ensure it is functioning correctly. Replace the LDP if it is faulty.
  4. Clear Code: Clear the P1472 code from the vehicle's ECM using an OBD-II scanner after the repair has been completed.
  5. Perform a Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the Check Engine Light does not illuminate again.

Cost to Fix P1472 Audi

The typical repair costs for addressing a P1472 code can vary depending on the extent of the damage and the specific components that need to be replaced. In general, the cost of parts for this repair can range from $100 to $300, with labor costs adding an additional $100 to $200. Therefore, the total cost for resolving a P1472 code can be estimated to be between $200 and $500. It's important to note that these are rough estimates, and actual repair costs may vary based on factors such as location, vehicle make and model, and the specific diagnosis time and labor rates at auto repair shops. It's advisable to consult with a professional mechanic to get a more accurate cost estimate for this repair.

Need more information about the P1472 Audi code?

Need more information on how to fix the P1472 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1472 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1472 Audi Code

No Frequently Asked Questions about P1472 Audi Code found.

Discuss the causes and fixes for P1472 Audi OBDII Code

Code P1472 Audi comments

No comments found for this page.