Engine-Codes.com
Engine-Codes – Buick – P146F Buick

P146F Buick Code - EVAP Purge System Pressure Sensor Performance

Quick Answer

The P146F Buick code indicates a problem with the EVAP (Evaporative Emission Control System) Purge System Pressure Sensor's performance. Common causes include Faulty Sensor: The sensor itself may be malfunctioning and providing incorrect readings to the vehicle's computer system, Wiring Issues: Damaged or corroded wiring leading to the sensor can cause communication problems and trigger the code, Vacuum Leaks: Any leaks in the EVAP system can disrupt the pressure readings and trigger the sensor performance code. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P146F Buick indicates EVAP Purge System Pressure Sensor Performance.
Common causes
Common causes include Faulty Sensor: The sensor itself may be malfunctioning and providing incorrect readings to the vehicle's computer system, Wiring Issues: Damaged or corroded wiring leading to the sensor can cause communication problems and trigger the code, Vacuum Leaks: Any leaks in the EVAP system can disrupt the pressure readings and trigger the sensor performance code.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 05, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P146F Buick Description

The P146F Buick code indicates a problem with the EVAP (Evaporative Emission Control System) Purge System Pressure Sensor's performance. This sensor is responsible for monitoring the pressure in the EVAP system, which helps control the emissions produced by the vehicle. When this sensor detects a performance issue, it can impact the vehicle's fuel efficiency, emissions output, and overall engine performance. If not addressed, it can lead to failed emissions tests, decreased fuel economy, and potential damage to other components of the EVAP system.

OBDII Code P146F Buick - EVAP Purge System Pressure Sensor Performance
P146F Buick Code - EVAP Purge System Pressure Sensor Performance

Common Causes of P146F Buick

  1. Faulty Sensor: The sensor itself may be malfunctioning and providing incorrect readings to the vehicle's computer system.
  2. Wiring Issues: Damaged or corroded wiring leading to the sensor can cause communication problems and trigger the code.
  3. Vacuum Leaks: Any leaks in the EVAP system can disrupt the pressure readings and trigger the sensor performance code.
  4. EVAP System Blockage: Blockages in the EVAP system can cause pressure buildup and affect sensor performance.

Symptoms of P146F Buick

  1. Check Engine Light: The most common symptom associated with this code is the illumination of the check engine light on the dashboard.
  2. Decreased Fuel Efficiency: A faulty EVAP Purge System Pressure Sensor can lead to decreased fuel efficiency as the engine may not be able to optimize fuel usage.
  3. Rough Idle: The engine may experience rough idling or stalling due to incorrect pressure readings from the sensor.
  4. Emissions Issues: A malfunctioning sensor can cause the vehicle to produce higher emissions, potentially leading to a failed emissions test.

How to Fix P146F Buick

  1. Diagnose the Issue: Use a diagnostic scanner to read the code and pinpoint the exact cause of the problem.
  2. Inspect Sensor and Wiring: Check the EVAP Purge System Pressure Sensor for any signs of damage and inspect the wiring for any issues.
  3. Repair or Replace Sensor: If the sensor is faulty, replace it with a new one and ensure proper installation.
  4. Fix Wiring: Repair any damaged or corroded wiring leading to the sensor to ensure proper communication.
  5. Clear Codes: After completing the repair, clear the diagnostic trouble codes and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P146F Buick

The cost of repairing a P146F Buick code can vary depending on the extent of the issue and the specific components that need to be replaced. On average, the repair cost for this type of issue can range from $200 to $500, including parts and labor. It's important to note that labor rates at auto repair shops can vary, so it's advisable to get quotes from different shops to determine the best price for the repair.

Need more information about the P146F Buick code?

Need more information on how to fix the P146F Buick code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P146F Buick code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P146F Buick Code

1. What are common symptoms of OBDII code P146F in a Buick related to the EVAP Purge System Pressure Sensor?

- Common symptoms include rough idling, decreased fuel efficiency, and the illumination of the check engine light.

2. What are possible causes of OBDII code P146F in a Buick?

- Possible causes may include a faulty EVAP purge system pressure sensor, a vacuum leak in the evaporative emissions system, or a damaged wiring harness.

3. How can I diagnose OBDII code P146F in my Buick?

- Diagnosis typically involves using an OBDII scanner to retrieve the code, conducting a visual inspection of the EVAP system components, and testing the purge system pressure sensor.

4. Can I drive my Buick with OBDII code P146F?

- It is generally not recommended to drive the vehicle with this code, as it can lead to decreased performance and potential damage to the engine or emissions system.

5. How can I repair OBDII code P146F in a Buick?

- Repair steps may include replacing the EVAP purge system pressure sensor, repairing any vacuum leaks, clearing the code with an OBDII scanner, and testing the system for proper operation.

6. Is it possible to prevent OBDII code P146F from occurring in my Buick?

- Regular maintenance, such as inspecting and replacing worn components in the EVAP system, can help prevent the occurrence of this code.

7. Can a DIY enthusiast fix OBDII code P146F in a Buick?

- While some may be able to diagnose and replace the necessary components themselves, it is recommended to consult a professional mechanic for proper diagnosis and repair.

8. How much does it typically cost to repair OBDII code P146F in a Buick?

- Repair costs can vary depending on the specific issue causing the code, but they may range from $100 to $300 for parts and labor.

9. Will OBDII code P146F cause my Buick to fail an emissions test?

- Yes, this code is related to the emissions control system, and if not addressed, it can cause the vehicle to fail an emissions test.

10. How long does it take to repair OBDII code P146F in a Buick?

- The repair time can vary based on the exact cause of the code and the availability of parts, but it typically takes a few hours to complete the repair.

Discuss the causes and fixes for P146F Buick OBDII Code

Submit a New Comment

Code P146F Buick comments

No comments found for this page.