P146E GMC Code - EVAP Purge System Pressure Sensor Circuit High Voltage
Quick Answer
The P146E GMC code indicates a problem with the EVAP (Evaporative Emission Control System) Purge System Pressure Sensor Circuit registering high voltage. Common causes include Faulty EVAP purge system pressure sensor, Damaged wiring or connectors in the pressure sensor circuit, Clogged EVAP canister. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P146E GMC indicates EVAP Purge System Pressure Sensor Circuit High Voltage.
- Common causes
- Common causes include Faulty EVAP purge system pressure sensor, Damaged wiring or connectors in the pressure sensor circuit, Clogged EVAP canister.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P146E GMC Description
The P146E GMC code indicates a problem with the EVAP (Evaporative Emission Control System) Purge System Pressure Sensor Circuit registering high voltage. The EVAP system is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from escaping into the atmosphere. The purge system pressure sensor is a crucial component that monitors the pressure in the EVAP system to ensure it is functioning correctly.
Common Causes of P146E GMC
- Faulty EVAP purge system pressure sensor
- Damaged wiring or connectors in the pressure sensor circuit
- Clogged EVAP canister
- Leak in the EVAP system
- Faulty EVAP purge solenoid
Symptoms of P146E GMC
- Check engine light illuminated
- Reduced fuel efficiency
- Strong fuel odor
- Rough idling or stalling
- Failed emissions test
How to Fix P146E GMC
- Diagnose the issue using a scan tool to verify the P146E code and identify the specific cause.
- Inspect the EVAP system components, including the pressure sensor, wiring, connectors, canister, and purge solenoid.
- Replace the faulty pressure sensor, wiring, connectors, or other damaged components as needed.
- Clear the trouble code from the vehicle's computer using the scan tool.
- Perform a test drive to ensure the issue has been resolved and the check engine light does not reappear.
Cost to Fix P146E GMC
The typical repair costs for addressing the P146E GMC code can vary depending on the specific cause of the issue. In general, replacing a faulty EVAP purge system pressure sensor can cost between $100 and $200, including parts and labor. However, if additional components need to be replaced or if extensive diagnostics are required, the total repair cost may increase. It is advisable to consult with a qualified mechanic or auto repair shop to get an accurate estimate based on the vehicle's make and model, as well as the local labor rates.
Need more information about the P146E GMC code?
Need more information on how to fix the P146E GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P146E GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P146E GMC Code
What does the OBDII code P146E mean for a GMC vehicle?
The P146E code indicates that the EVAP Purge System Pressure Sensor Circuit has a high voltage reading, suggesting an issue with the sensor or its electrical components.
What are the common symptoms of the P146E code?
Common symptoms include an illuminated check engine light, failure to pass emissions tests, possible fuel odor, and reduced fuel efficiency.
What causes the P146E code to appear?
The code can be caused by a faulty EVAP purge system pressure sensor, damaged wiring or connectors, a short circuit, or issues with the vehicle’s PCM (Powertrain Control Module).
Can I drive my GMC vehicle with the P146E code?
While the vehicle may still be drivable, it is not recommended as ignoring the issue can lead to increased emissions, fuel system inefficiency, and potential damage to other components.
How do I fix the P146E code on a GMC vehicle?
Repairs may include replacing the EVAP purge system pressure sensor, repairing damaged wires or connectors, or reprogramming the PCM if necessary.
What tools are needed to diagnose the P146E code?
You will need an OBDII scanner, a multimeter to check voltage and continuity, and possibly a smoke machine to test for leaks in the EVAP system.
How much does it cost to repair the P146E code?
The repair cost varies but typically ranges from $100 to $300, depending on whether the issue is a simple wiring repair or a sensor replacement.
Can a loose gas cap cause the P146E code?
A loose gas cap is unlikely to trigger the P146E code specifically, but it can cause other EVAP-related codes. It's still a good idea to check the gas cap as part of your diagnosis.
How do you test the EVAP purge system pressure sensor?
Use a multimeter to measure the sensor’s voltage and compare it to the manufacturer’s specifications. Check the sensor’s wiring for shorts or open circuits.
Does the P146E code require reprogramming the PCM?
Reprogramming the PCM is not always necessary but may be required if the issue persists after replacing faulty components and repairing wiring.
Discuss the causes and fixes for P146E GMC OBDII Code
Code P146E GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.