P146A 2019 Chevrolet Silverado Code - EVAP Purge Pump Speed Too High
Quick Answer
The P146A code, known as EVAP Purge Pump Speed Too High, is a diagnostic trouble code (DTC) that is registered in a 2019 Chevrolet Silverado when the vehicle's onboard computer, or Engine Control Unit (ECU), detects an abnormality in the operation of the Evaporative Emission Control (EVAP) system's purge pump. Common causes include There are several possible causes that could trigger the P146A code, including:, A faulty EVAP purge pump, Damaged or corroded wiring in the EVAP system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P146A 2019 Chevrolet Silverado indicates EVAP Purge Pump Speed Too High.
- Common causes
- Common causes include There are several possible causes that could trigger the P146A code, including:, A faulty EVAP purge pump, Damaged or corroded wiring in the EVAP system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P146A 2019 Chevrolet Silverado Description
The P146A code, known as EVAP Purge Pump Speed Too High, is a diagnostic trouble code (DTC) that is registered in a 2019 Chevrolet Silverado when the vehicle's onboard computer, or Engine Control Unit (ECU), detects an abnormality in the operation of the Evaporative Emission Control (EVAP) system's purge pump. The EVAP system is designed to limit the emissions of volatile organic compounds (VOCs) from the vehicle's fuel system into the atmosphere. It does this by using a purge pump to draw in fresh air and recirculate the VOCs back into the combustion process. When the vehicle's ECU detects that the speed of the purge pump is too high, it triggers the P146A code. This could potentially affect the vehicle's fuel efficiency, increase emissions, and in severe cases, cause damage to the EVAP system and related components. Ignoring this code could lead to more serious problems such as the vehicle failing an emissions test or a decrease in overall performance.
Common Causes of P146A 2019 Chevrolet Silverado
There are several possible causes that could trigger the P146A code, including:
- A faulty EVAP purge pump.
- Damaged or corroded wiring in the EVAP system.
- A clogged or damaged EVAP canister.
- Faulty or damaged purge valve.
- Software issues within the ECU.
Symptoms of P146A 2019 Chevrolet Silverado
Symptoms associated with the P146A code may include:
- Check Engine Light illuminated.
- Decreased fuel efficiency.
- Noticeable fuel odor from the vehicle.
- Difficulty starting the vehicle.
- Engine stalling or rough idle.
How to Fix P146A 2019 Chevrolet Silverado
The repair process for the P146A code might involve the following steps:
- Perform a thorough visual inspection of the EVAP system, checking for any visible damage or leaks.
- Test the operation of the purge pump and replace it if it is faulty.
- Inspect and replace any damaged or corroded wiring in the EVAP system.
- Check the operation of the purge valve and replace it if necessary.
- If the ECU is suspected to be the issue, it may need to be reprogrammed or replaced.
Cost to Fix P146A 2019 Chevrolet Silverado
The cost of repairing the P146A code can vary greatly depending on the exact problem. If the issue is a faulty purge pump, the part itself can cost between $100 to $200, plus labor. If the problem is a damaged EVAP canister or wiring, the cost could range from $200 to $600, including labor. More serious issues like a faulty ECU could cost upwards of $1000 to repair. It's important to note that diagnosis time and labor rates can vary based on factors like location, vehicle make and model, and engine type. Auto repair shops typically charge between $80 and $150 per hour for labor; rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. Always check with local repair shops for a more precise estimate.
Need more information about the P146A 2019 Chevrolet Silverado code?
Need more information on how to fix the P146A 2019 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P146A 2019 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P146A 2019 Chevrolet Silverado Code
1. What are common symptoms of OBDII code P146A in a 2019 Chevrolet Silverado?
- Common symptoms include the check engine light illuminating, rough idling, decreased fuel efficiency, and potential fuel odor.
2. What does the OBDII code P146A indicating "EVAP Purge Pump Speed Too High" mean for a 2019 Chevrolet Silverado?
- This code indicates that the EVAP purge pump is operating at a speed that is higher than expected, potentially leading to issues with the vehicle's emission control system.
3. What are possible causes of OBDII code P146A in a 2019 Chevrolet Silverado?
- Possible causes include a faulty EVAP purge pump, damaged wiring or connectors in the EVAP system, a vacuum leak, or a malfunctioning EVAP pressure sensor.
4. How serious is OBDII code P146A in a 2019 Chevrolet Silverado?
- While the vehicle may still be driveable with this code, it is important to address it promptly to prevent potential damage to the emission control system and ensure optimal vehicle performance.
5. Can I continue driving my 2019 Chevrolet Silverado with OBDII code P146A active?
- It is generally not recommended to continue driving with this code active, as it can lead to increased emissions, reduced fuel efficiency, and potential long-term damage to the vehicle's components.
6. How can I diagnose OBDII code P146A in a 2019 Chevrolet Silverado?
- Diagnosing this code typically involves using an OBDII scanner to retrieve the specific fault codes, conducting a visual inspection of the EVAP system components, and performing tests to pinpoint the root cause.
7. What are some potential repair tips for fixing OBDII code P146A in a 2019 Chevrolet Silverado?
- Repair tips may include checking and replacing the EVAP purge pump, inspecting and repairing damaged wiring or connectors, addressing any vacuum leaks, and testing or replacing the EVAP pressure sensor as needed.
8. Can I reset the check engine light after fixing OBDII code P146A in my 2019 Chevrolet Silverado?
- Yes, once the underlying issue causing the code has been repaired, you can reset the check engine light using an OBDII scanner to clear the stored fault codes and turn off the warning indicator.
9. How much does it typically cost to repair OBDII code P146A in a 2019 Chevrolet Silverado?
- The cost of repairing this code can vary depending on the specific cause of the issue, but expenses may include parts such as the EVAP purge pump, labor costs for diagnosis and repair, and potentially additional components or repairs.
10. Are there any preventive maintenance measures to help avoid OBDII code P146A in a 2019 Chevrolet Silverado?
- Regularly checking and maintaining the EVAP system components, addressing any signs of damage or wear promptly, and following the manufacturer's recommended maintenance schedule can help prevent issues leading to this code.
Discuss the causes and fixes for P146A 2019 Chevrolet Silverado OBDII Code
Code P146A 2019 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.