P1444 BMW Code - Diagnostic Module Tank Leakage Pump Control Open Circuit
Quick Answer
The P1444 BMW diagnostic code indicates a fault with the Diagnostic Module Tank Leakage Pump Control Open Circuit. Common causes include Faulty Tank Leakage Pump Control: The most common cause of the P1444 code is a malfunction in the tank leakage pump control itself, Wiring Issues: Problems with the wiring or connectors related to the tank leakage pump control can also trigger this code, Vacuum Leaks: Vacuum leaks in the evaporative emissions system can cause the system to not function properly. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1444 BMW indicates Diagnostic Module Tank Leakage Pump Control Open Circuit.
- Common causes
- Common causes include Faulty Tank Leakage Pump Control: The most common cause of the P1444 code is a malfunction in the tank leakage pump control itself, Wiring Issues: Problems with the wiring or connectors related to the tank leakage pump control can also trigger this code, Vacuum Leaks: Vacuum leaks in the evaporative emissions system can cause the system to not function properly.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1444 BMW Description
The P1444 BMW diagnostic code indicates a fault with the Diagnostic Module Tank Leakage Pump Control Open Circuit. This code is typically associated with the evaporative emissions system in the vehicle. The evaporative emissions system is responsible for capturing and storing fuel vapors from the fuel tank to prevent them from escaping into the atmosphere. The Diagnostic Module Tank Leakage Pump Control is a component of this system that helps to monitor and control the pressure within the fuel tank.
Common Causes of P1444 BMW
- Faulty Tank Leakage Pump Control: The most common cause of the P1444 code is a malfunction in the tank leakage pump control itself.
- Wiring Issues: Problems with the wiring or connectors related to the tank leakage pump control can also trigger this code.
- Vacuum Leaks: Vacuum leaks in the evaporative emissions system can cause the system to not function properly.
- Faulty Purge Valve: A malfunctioning purge valve can also lead to issues with the evaporative emissions system and trigger this code.
Symptoms of P1444 BMW
- Check Engine Light: The most common symptom associated with the P1444 code is the illumination of the check engine light on the vehicle's dashboard.
- Decreased Fuel Efficiency: A fault in the evaporative emissions system can lead to a decrease in fuel efficiency as fuel vapors may be escaping.
- Smell of Fuel: If fuel vapors are escaping from the fuel tank, you may notice a strong smell of fuel around the vehicle.
- Failed Emissions Test: If the P1444 code is not addressed, it could lead to a failed emissions test due to increased emissions from the vehicle.
How to Fix P1444 BMW
- Diagnose the Issue: The first step in repairing the P1444 code is to diagnose the exact cause of the problem. This may involve using a scan tool to retrieve the fault code and inspecting the components of the evaporative emissions system.
- Replace Tank Leakage Pump Control: If the tank leakage pump control is found to be faulty, it will need to be replaced with a new component.
- Check Wiring and Connectors: Inspect the wiring and connectors related to the tank leakage pump control for any damage or corrosion. Repair or replace any damaged components.
- Test the System: Once the repairs have been made, it is important to test the evaporative emissions system to ensure that the issue has been resolved and that the code does not reappear.
- Clear the Code: After the repairs have been completed and the issue resolved, clear the fault code from the vehicle's memory using a scan tool.
Cost to Fix P1444 BMW
The typical repair costs for addressing the P1444 code can vary depending on the specific cause of the issue and the labor rates in your area. In general, you can expect to pay between $200 and $500 for parts and labor to resolve this issue. However, it is important to note that the cost may be higher if additional components need to be replaced or if there are other underlying issues with the evaporative emissions system. It is advisable to contact local auto repair shops for a more accurate estimate based on your vehicle make and model. Remember that labor rates can vary between $80 and $150 per hour, so the final cost will depend on the shop you choose.
Need more information about the P1444 BMW code?
Need more information on how to fix the P1444 BMW code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1444 BMW code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1444 BMW Code
1. What does the OBDII code P1444 mean for a BMW?
P1444 indicates an open circuit in the Diagnostic Module Tank Leakage (DMTL) pump control, which is part of the evap system responsible for detecting fuel vapor leaks.
2. What are the common symptoms of code P1444 in a BMW?
Common symptoms include the check engine light turning on, potential evap system malfunction warnings, and reduced fuel efficiency in some cases.
3. What causes the P1444 code on a BMW?
The code is usually caused by a faulty DMTL pump, damaged wiring or connectors, or issues with the control circuit.
4. Can I drive my BMW with the P1444 code?
While driving with the P1444 code is possible, it is not recommended as it may lead to evap system inefficiencies and could affect emissions compliance.
5. How do I diagnose the P1444 code on a BMW?
Diagnosis involves inspecting the DMTL pump, checking wiring and connectors for damage or corrosion, and testing the pump control circuit using a multimeter.
6. What repairs are needed to fix the P1444 code on a BMW?
Common repairs include replacing the DMTL pump, repairing or replacing damaged wiring, and ensuring proper connection of electrical components.
7. How much does it cost to repair the P1444 code on a BMW?
Repair costs can vary but typically range from $200 to $500 depending on whether the DMTL pump or wiring needs replacement.
8. Can a faulty DMTL pump trigger the P1444 code?
Yes, a malfunctioning DMTL pump is one of the most common causes of this code.
9. Will clearing the P1444 code fix the issue permanently?
Clearing the code may temporarily remove the warning, but the underlying problem must be addressed to prevent the code from returning.
10. Is the P1444 code related to fuel system leaks?
Yes, the DMTL pump is part of the evap system designed to detect fuel vapor leaks, and an open circuit can disrupt this function.
Discuss the causes and fixes for P1444 BMW OBDII Code
Code P1444 BMW comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.