Engine-CodesChevrolet – P1436 2015 Chevrolet Silverado

P1436 2015 Chevrolet Silverado Code - Particulate Matter Sensor Control Module Temperature Signal Message Counter Incorrect

Quick Answer

The P1436 diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado indicates an issue with the Particulate Matter Sensor Control Module Temperature Signal Message Counter being incorrect. Common causes include Faulty Particulate Matter Sensor Control Module: A malfunctioning sensor control module can trigger the P1436 code, Defective Temperature Sensor: A faulty temperature sensor within the control module can lead to incorrect temperature readings, Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the sensor and control module. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1436 2015 Chevrolet Silverado indicates Particulate Matter Sensor Control Module Temperature Signal Message Counter Incorrect.
Common causes
Common causes include Faulty Particulate Matter Sensor Control Module: A malfunctioning sensor control module can trigger the P1436 code, Defective Temperature Sensor: A faulty temperature sensor within the control module can lead to incorrect temperature readings, Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the sensor and control module.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 17, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1436 2015 Chevrolet Silverado Description

The P1436 diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado indicates an issue with the Particulate Matter Sensor Control Module Temperature Signal Message Counter being incorrect. This sensor is a crucial component of the vehicle's emissions control system, specifically designed to monitor the temperature of the particulate matter sensor control module. The particulate matter sensor is responsible for detecting the levels of harmful particles in the exhaust gases emitted by the vehicle.

OBDII Code P1436 2015 Chevrolet Silverado - Particulate Matter Sensor Control Module Temperature Signal Message Counter Incorrect
P1436 2015 Chevrolet Silverado Code - Particulate Matter Sensor Control Module Temperature Signal Message Counter Incorrect

Common Causes of P1436 2015 Chevrolet Silverado

  1. Faulty Particulate Matter Sensor Control Module: A malfunctioning sensor control module can trigger the P1436 code.
  2. Defective Temperature Sensor: A faulty temperature sensor within the control module can lead to incorrect temperature readings.
  3. Wiring Issues: Damaged or corroded wiring connections can disrupt the communication between the sensor and control module.
  4. Communication Error: An error in the communication system between the sensor and control module can result in the incorrect temperature signal message counter.

Symptoms of P1436 2015 Chevrolet Silverado

  1. Check Engine Light: The most common symptom associated with the P1436 code is the illumination of the check engine light on the vehicle's dashboard.
  2. Reduced Fuel Efficiency: Drivers may notice a decrease in fuel efficiency as a result of the incorrect temperature signal affecting engine performance.
  3. Decreased Power Output: The vehicle may experience a loss of power or sluggish acceleration due to the issue with the particulate matter sensor control module.
  4. Rough Idling: The engine may idle roughly or inconsistently, indicating a potential problem with the emissions control system.

How to Fix P1436 2015 Chevrolet Silverado

  1. Diagnose the Issue: Use a diagnostic scanner to retrieve the specific DTC and perform a thorough inspection of the particulate matter sensor control module and related components.
  2. Check Wiring Connections: Inspect the wiring harness for any signs of damage, corrosion, or loose connections. Repair or replace any faulty wiring as needed.
  3. Test Temperature Sensor: Verify the functionality of the temperature sensor by testing its resistance and comparing the readings to specifications. Replace the sensor if necessary.
  4. Replace Particulate Matter Sensor Control Module: If the control module is determined to be faulty, replace it with a new unit to ensure proper operation.
  5. Clear DTCs and Test Drive: After completing the repairs, clear the DTCs from the vehicle's computer system and test drive the vehicle to confirm that the issue has been resolved.

Cost to Fix P1436 2015 Chevrolet Silverado

The typical repair costs for addressing the P1436 code on a 2015 Chevrolet Silverado can vary depending on the specific cause of the issue and the cost of parts and labor. In general, the cost of replacing a faulty particulate matter sensor control module can range from $200 to $500, while replacing a temperature sensor may cost between $50 and $150. Labor costs can add an additional $80 to $150 per hour, with the total repair bill likely falling between $300 and $800. It's important to note that these estimates are approximate, and actual costs may vary based on factors such as location, vehicle make and model, and the specific repair shop's rates. Be sure to consult with a qualified mechanic or dealership for a more accurate cost estimate tailored to your situation.

Need more information about the P1436 2015 Chevrolet Silverado code?

Need more information on how to fix the P1436 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1436 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1436 2015 Chevrolet Silverado Code

1. What does the OBDII code P1436 mean on a 2015 Chevrolet Silverado?

P1436 indicates an issue with the Particulate Matter Sensor Control Module, specifically that the temperature signal message counter is incorrect or invalid.

2. What are the common symptoms of code P1436 in a 2015 Chevrolet Silverado?

Symptoms may include the check engine light turning on, reduced fuel efficiency, possible performance issues, and in some cases, difficulty passing emissions tests.

3. What causes the P1436 code to appear in a 2015 Chevrolet Silverado?

Possible causes include a faulty particulate matter sensor, issues with the sensor wiring or connectors, a malfunctioning control module, or software glitches in the vehicle's ECU.

4. Can I drive my 2015 Chevrolet Silverado with the P1436 code?

While the vehicle may still be drivable, prolonged operation with this code can lead to decreased performance and potential damage to the emissions system.

5. How do I diagnose the P1436 code on my 2015 Chevrolet Silverado?

Diagnosis typically involves scanning the vehicle with an OBDII reader, inspecting the particulate matter sensor and its wiring, and checking for any software updates for the control module.

6. How can the P1436 code be fixed in a 2015 Chevrolet Silverado?

Repairs may include replacing the particulate matter sensor, repairing or replacing damaged wiring or connectors, updating the vehicle’s software, or replacing the control module if necessary.

7. Is the P1436 code related to emissions issues?

Yes, the P1436 code is directly related to the emissions system, as the particulate matter sensor monitors exhaust particulates to ensure compliance with emissions regulations.

8. What tools are needed to troubleshoot the P1436 code on a 2015 Chevrolet Silverado?

You’ll need an OBDII scanner, a multimeter for testing wiring and connectors, and possibly a service manual for detailed wiring diagrams and specifications.

9. How much does it typically cost to fix the P1436 code in a 2015 Chevrolet Silverado?

Repair costs can range from $200 to $800 or more, depending on whether the issue is with the sensor, wiring, control module, or a combination of these components.

10. Can a software update resolve the P1436 code on a 2015 Chevrolet Silverado?

In some cases, a software update for the vehicle’s ECU or control module can resolve the issue if the problem is caused by a programming glitch.

Discuss the causes and fixes for P1436 2015 Chevrolet Silverado OBDII Code

Code P1436 2015 Chevrolet Silverado comments

No comments found for this page.