P142D Mercury Code - Exhaust Gas Recirculation Sensor 'D' Circuit Low
Quick Answer
The P142D diagnostic trouble code for Mercury vehicles indicates an issue with the Exhaust Gas Recirculation (EGR) Sensor 'D' Circuit being detected as too low. Common causes include Faulty EGR Sensor 'D', Wiring issues in the EGR circuit, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P142D Mercury indicates Exhaust Gas Recirculation Sensor 'D' Circuit Low.
- Common causes
- Common causes include Faulty EGR Sensor 'D', Wiring issues in the EGR circuit, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P142D Mercury Description
The P142D diagnostic trouble code for Mercury vehicles indicates an issue with the Exhaust Gas Recirculation (EGR) Sensor 'D' Circuit being detected as too low. The EGR system is an essential component of the vehicle's emissions control system, responsible for recirculating a portion of the exhaust gases back into the engine intake to reduce emissions of nitrogen oxides (NOx). The EGR sensor 'D' is tasked with monitoring the flow and function of the EGR system, ensuring it operates within optimal parameters.
Common Causes of P142D Mercury
- Faulty EGR Sensor 'D'
- Wiring issues in the EGR circuit
- ECM malfunction
- Carbon buildup in the EGR system
- Vacuum leaks in the EGR system
Symptoms of P142D Mercury
- Rough idle
- Stalling
- Decreased fuel efficiency
- Engine misfires
- Failed emissions tests
How to Fix P142D Mercury
- Begin by conducting a visual inspection of the EGR sensor and its wiring harness to check for any visible damage or corrosion. Repair or replace any damaged components.
- Test the EGR sensor using a multimeter to ensure it is functioning correctly. Replace the sensor if it is out of specification.
- Check the wiring harness for continuity and repair any breaks or shorts that may be present.
- Clear the diagnostic trouble codes using a scan tool and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnosis may be needed to identify any underlying issues with the EGR system or ECM.
Cost to Fix P142D Mercury
The typical repair costs for addressing a P142D code on a Mercury vehicle can range from $200 to $500, including parts and labor. However, the specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's advisable to check local rates for a more precise estimate. Please note that rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less.
Need more information about the P142D Mercury code?
Need more information on how to fix the P142D Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P142D Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P142D Mercury Code
What does the OBDII code P142D mean?
The OBDII code P142D indicates a low signal in the Exhaust Gas Recirculation (EGR) Sensor 'D' circuit, which can affect the vehicle's emissions control system.
What are the common symptoms of a P142D code?
Common symptoms include poor engine performance, increased fuel consumption, rough idling, and the Check Engine Light being illuminated.
What can cause the P142D code to trigger?
Causes can include a faulty EGR sensor, wiring issues such as shorts or breaks in the circuit, a clogged EGR valve, or issues with the engine control module (ECM).
How can I diagnose a P142D code?
To diagnose a P142D code, check the EGR sensor and circuit for damage, test the sensor's voltage and ground, and inspect the EGR valve for blockages or malfunctions.
What are some common repairs for a P142D code?
Common repairs may involve replacing the EGR sensor, repairing or replacing damaged wiring, cleaning or replacing the EGR valve, or reprogramming the ECM if necessary.
Can I drive my car with a P142D code?
While it may be possible to drive the vehicle, it's not recommended as it can lead to increased emissions, reduced fuel efficiency, and potential engine damage over time.
How can I clear the P142D code after repairs?
Once repairs are made, you can clear the code using an OBDII scanner, or by disconnecting the vehicle's battery for a few minutes. However, the problem must be resolved to prevent the code from reappearing.
Is the P142D code serious?
Yes, the P142D code is considered serious as it relates to the vehicle's emissions system and can negatively impact engine performance and fuel efficiency.
What should I do if the P142D code keeps coming back?
If the P142D code keeps returning, further diagnosis is needed to identify any underlying issues, such as persistent wiring problems, sensor faults, or ECM issues that may require professional attention.
Discuss the causes and fixes for P142D Mercury OBDII Code
Code P142D Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.