P1416 Chrysler Code - Cylinder 6 Reactivation Control Performance
Quick Answer
The P1416 Chrysler diagnostic trouble code (DTC) indicates an issue with the Cylinder 6 Reactivation Control Performance. Common causes include Faulty cylinder deactivation solenoids, Wiring issues, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1416 Chrysler indicates Cylinder 6 Reactivation Control Performance.
- Common causes
- Common causes include Faulty cylinder deactivation solenoids, Wiring issues, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1416 Chrysler Description
The P1416 Chrysler diagnostic trouble code (DTC) indicates an issue with the Cylinder 6 Reactivation Control Performance. This code is specific to Chrysler vehicles and typically occurs when the Engine Control Module (ECM) detects that the reactivation control for cylinder 6 is not performing as expected.
Common Causes of P1416 Chrysler
- Faulty cylinder deactivation solenoids
- Wiring issues
- Malfunctioning ECM
- Mechanical problems within the engine
Symptoms of P1416 Chrysler
- Decreased fuel efficiency
- Rough idling
- Misfires
- Hesitation or loss of power
- Engine stalling
How to Fix P1416 Chrysler
- Begin by using a scan tool to diagnose the specific cause of the P1416 Chrysler code.
- Inspect the wiring harness and connections related to the cylinder deactivation system for any damage or corrosion.
- Test the cylinder deactivation solenoids for proper operation and replace any faulty solenoids.
- If the issue persists, further diagnostics may be required to determine if the ECM needs to be replaced or reprogrammed.
Cost to Fix P1416 Chrysler
The cost of repairing the P1416 Chrysler code can vary depending on the specific cause of the issue. In general, the cost of parts and labor for this repair can range from $200 to $500. However, it is important to note that labor rates and part prices can vary significantly based on the location of the repair shop, the make and model of the vehicle, and the type of engine. It is recommended to obtain a few quotes from reputable repair shops in your area to get a more accurate estimate.
When is the Code Detected?
Need more information about the P1416 Chrysler code?
Need more information on how to fix the P1416 Chrysler code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1416 Chrysler code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1416 Chrysler Code
1. What does the OBDII code P1416 mean on a Chrysler?
P1416 indicates a "Cylinder 6 Reactivation Control Performance" issue, meaning the system is having trouble controlling or reactivating cylinder 6 during specific operating conditions.
2. What are the common symptoms of P1416 on a Chrysler?
Symptoms may include rough idling, reduced engine performance, poor fuel efficiency, and the Check Engine Light being illuminated.
3. What causes the P1416 code to appear on a Chrysler?
Common causes include a malfunctioning cylinder deactivation solenoid, clogged oil passages, low oil pressure, faulty wiring, or a bad PCM (Powertrain Control Module).
4. Can low oil pressure trigger the P1416 code?
Yes, low oil pressure can prevent proper activation of the cylinder deactivation system, leading to the P1416 code.
5. How is the P1416 code diagnosed on a Chrysler?
A mechanic will use a scan tool to confirm the code, inspect cylinder deactivation components, check oil pressure, and test wiring and solenoids for faults.
6. Can I drive my Chrysler with the P1416 code?
While the vehicle may be drivable, ignoring the code can lead to reduced performance, excessive fuel consumption, and potential engine damage if left unresolved.
7. How do you repair the P1416 code on a Chrysler?
Repairs may involve cleaning or replacing the cylinder 6 deactivation solenoid, addressing oil pressure issues, repairing wiring, or updating/replacing the PCM.
8. Is a software update sometimes required to fix P1416?
Yes, in some cases, a software update for the PCM may resolve the issue if it stems from a programming error.
9. Can dirty oil cause the P1416 code on a Chrysler?
Yes, dirty or degraded oil can clog passages or reduce pressure, impairing the cylinder deactivation system and triggering the code.
10. What tools are needed to troubleshoot the P1416 code on a Chrysler?
A scan tool, multimeter, oil pressure gauge, and basic hand tools are typically required to diagnose and repair this issue.
Discuss the causes and fixes for P1416 Chrysler OBDII Code
-
I have replace the coil pack spark plugs fuel injector still same problem idles rough
-
There are some test that needs to be done to determine what the problem is, but according a national database of repairs, the most likely cause for your vehicle when you have both codes is the Intake Manifold Gasket
-
I've replaced the kids sensor and the coil pack and changed the oil, still have the same code p1416 cylinder six what can I try not
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.