P1415 LAND-ROVER Possible Causes
- Faulty Secondary Air Injection (SAI) Vacuum Solenoid Valve
- Intake air leak
- Blocked SAI System hoses
- SAI Vacuum Solenoid Valve harness is open or shorted
- SAI Vacuum Solenoid Valve circuit poor electrical connection
First diagnose P1415 LAND-ROVER code
Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded terminals.
Cost of diagnosing the P1415 LAND-ROVER code
Labor: 1.0The cost of diagnosing the P1415 LAND-ROVER code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.
P1415 LAND-ROVER Possible Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
P1415 LAND-ROVER MeaningThe secondary air injection system is used to limit the emission of carbon monoxide (CO) and hydrocarbons (HCs) that are prevalent in the exhaust during cold starting of a spark ignition engine. The concentration of hydrocarbons experienced during cold starting at low temperatures are particularly high until the engine and catalytic converter reach normal operating temperature. The lower the cold start temperature, the greater the prevalence of hydrocarbons emitted from the engine.
The secondary air injection (SAI) system comprises the following components:
- Secondary air injection pump
- SAI vacuum solenoid valve
- SAI control valves (2 off, 1 for each bank of cylinders)
- SAI pump relay
- Vacuum reservoir
- Vacuum harness and pipes
P1415 LAND-ROVER More InformationNeed more information on how to fix the P1415 LAND-ROVER code?
Get Access to Factory Service Manuals