P140E GMC Code - Exhaust Gas Recirculation Motor Control Circuit 2 High Voltage
Quick Answer
The P140E diagnostic trouble code for GMC vehicles indicates an issue with the Exhaust Gas Recirculation (EGR) Motor Control Circuit 2, specifically suggesting that there is a high voltage condition. Common causes include Malfunctioning EGR motor, Short circuit in the wiring, Faulty EGR valve position sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P140E GMC indicates Exhaust Gas Recirculation Motor Control Circuit 2 High Voltage.
- Common causes
- Common causes include Malfunctioning EGR motor, Short circuit in the wiring, Faulty EGR valve position sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P140E GMC Description
The P140E diagnostic trouble code for GMC vehicles indicates an issue with the Exhaust Gas Recirculation (EGR) Motor Control Circuit 2, specifically suggesting that there is a high voltage condition. The EGR system plays a crucial role in reducing emissions by recirculating a portion of exhaust gases back into the intake manifold for combustion. This process helps lower nitrogen oxide (NOx) emissions by reducing the peak combustion temperatures in the engine.
Common Causes of P140E GMC
- Malfunctioning EGR motor
- Short circuit in the wiring
- Faulty EGR valve position sensor
- Issues with the control module
- Corrosion or damage to electrical connections
Symptoms of P140E GMC
- Decreased fuel efficiency
- Rough idling or stalling
- Engine knocking or pinging
- Increased emissions
- Check Engine Light illuminated
How to Fix P140E GMC
- Begin by clearing the trouble code with a scan tool and verifying that it returns upon driving the vehicle.
- Inspect the EGR motor, wiring harness, EGR valve position sensor, and control module for any visible damage or signs of wear.
- Test the EGR motor and sensor using a multimeter to check for proper resistance and voltage readings.
- Replace any components that are found to be faulty, such as the EGR motor, sensor, or control module.
- Clear the trouble code again after repairs are completed and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P140E GMC
The cost of repairing the P140E code for GMC vehicles can vary depending on the specific cause of the issue and the parts needed for replacement. On average, the repair costs for this type of EGR system problem can range from $200 to $500, including parts and labor. It's important to note that diagnosis time and labor rates at auto repair shops can vary, so it's recommended to get a detailed estimate from a trusted mechanic before proceeding with the repairs.
Need more information about the P140E GMC code?
Need more information on how to fix the P140E GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P140E GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P140E GMC Code
1. What are the common symptoms of OBDII code P140E GMC?
- Common symptoms include rough idling, engine stalling, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What causes the OBDII code P140E GMC to be triggered?
- The code is triggered when the Exhaust Gas Recirculation (EGR) motor control circuit 2 detects a high voltage condition, often caused by a faulty EGR valve or wiring issues.
3. How can I diagnose the OBDII code P140E GMC?
- Diagnosis typically involves inspecting the EGR valve, checking the wiring harness for damage, and using a multimeter to test the voltage in the EGR motor control circuit.
4. Is it safe to continue driving with the OBDII code P140E GMC active?
- It is not recommended to drive with the code active, as it can lead to poor engine performance and potential damage. It's best to address the issue promptly.
5. How can I repair the OBDII code P140E GMC?
- Repair options may include replacing the EGR valve, repairing any damaged wiring, resetting the fault codes, and retesting the system to ensure the issue has been resolved.
6. Can a dirty EGR system cause the OBDII code P140E GMC?
- Yes, a dirty or clogged EGR system can cause the code to be triggered, as it can affect the proper operation of the EGR valve and motor control circuit.
7. Are there any maintenance tips to prevent the OBDII code P140E GMC from recurring?
- Regularly inspecting and cleaning the EGR system, checking the wiring connections, and using high-quality fuel can help prevent the code from recurring.
8. How much does it typically cost to repair the OBDII code P140E GMC at a mechanic?
- The cost of repair can vary depending on the specific issue, but it may range from $200 to $500, including parts and labor.
9. Will resetting the Check Engine Light resolve the OBDII code P140E GMC?
- Resetting the Check Engine Light may temporarily turn it off, but if the underlying issue causing the code is not addressed, the light is likely to come back on.
10. Can I use an OBDII scanner to clear the OBDII code P140E GMC myself?
- Yes, you can use an OBDII scanner to clear the code yourself, but it's important to diagnose and fix the root cause of the issue to prevent it from reoccurring.
Discuss the causes and fixes for P140E GMC OBDII Code
Code P140E GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.