P1408 2009 Ford Fusion Code - EGR Flow Out of Self-Test Range
Quick Answer
The P1408 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that the Exhaust Gas Recirculation (EGR) system is experiencing a flow that is outside of the self-test range. Common causes include Faulty EGR valve, Clogged EGR passages, Wiring or electrical issues with the EGR system. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1408 2009 Ford Fusion indicates EGR Flow Out of Self-Test Range.
- Common causes
- Common causes include Faulty EGR valve, Clogged EGR passages, Wiring or electrical issues with the EGR system.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1408 2009 Ford Fusion Description
The P1408 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that the Exhaust Gas Recirculation (EGR) system is experiencing a flow that is outside of the self-test range. The EGR system is responsible for recirculating a portion of the exhaust gases back into the intake manifold to reduce emissions and control combustion temperatures. When the EGR flow is out of range, it can lead to a variety of issues with the vehicle's performance and emissions.
Common Causes of P1408 2009 Ford Fusion
- Faulty EGR valve
- Clogged EGR passages
- Wiring or electrical issues with the EGR system
- Vacuum leaks in the EGR system
- Carbon buildup in the EGR system
Symptoms of P1408 2009 Ford Fusion
- Check Engine Light illuminated on the dashboard
- Rough idling or stalling
- Decreased fuel efficiency
- Engine knocking or pinging
- Increased emissions
How to Fix P1408 2009 Ford Fusion
- Begin by diagnosing the specific cause of the P1408 code using a scan tool to pinpoint the issue.
- Inspect the EGR valve for proper operation and clean or replace it if necessary.
- Check for any blockages in the EGR passages and clear them out.
- Inspect the wiring and connections in the EGR system for any damage or corrosion, repairing or replacing as needed.
- Clear the DTC and test drive the vehicle to ensure that the issue has been resolved.
Cost to Fix P1408 2009 Ford Fusion
The cost of repairing a P1408 code on a 2009 Ford Fusion can vary depending on the specific cause of the issue. In general, the cost of parts for an EGR valve replacement can range from $100 to $300, while labor costs can range from $100 to $200. Overall, the total repair cost could be anywhere from $200 to $500. It's important to note that labor rates at auto repair shops can vary, so it's recommended to check with local shops for a more accurate estimate.
Need more information about the P1408 2009 Ford Fusion code?
Need more information on how to fix the P1408 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1408 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1408 2009 Ford Fusion Code
1. What are common symptoms of OBDII code P1408 on a 2009 Ford Fusion?
- Common symptoms include rough idling, engine stalling, decreased fuel efficiency, and the illumination of the Check Engine Light.
2. What does the OBDII code P1408 on a 2009 Ford Fusion indicate?
- The code P1408 indicates that the EGR (Exhaust Gas Recirculation) flow is out of the self-test range set by the vehicle's onboard computer.
3. What are possible causes of OBDII code P1408 on a 2009 Ford Fusion?
- Possible causes include a faulty EGR valve, clogged EGR passages, wiring issues, vacuum leaks, or a malfunctioning EGR position sensor.
4. How can I diagnose the OBDII code P1408 on my 2009 Ford Fusion?
- Diagnosing the code typically involves checking the EGR valve, inspecting for clogs in the EGR system, testing the EGR position sensor, and scanning for any related trouble codes.
5. Can I continue driving my 2009 Ford Fusion with the OBDII code P1408?
- It is not recommended to drive the vehicle with the code P1408 present, as it can lead to poor engine performance and potential damage if not addressed promptly.
6. How can I repair OBDII code P1408 on a 2009 Ford Fusion?
- Repairing the code may involve cleaning or replacing the EGR valve, clearing any obstructions in the EGR system, fixing wiring issues, or replacing the EGR position sensor.
7. Is it possible to reset the OBDII code P1408 on a 2009 Ford Fusion?
- Yes, after addressing the underlying issue causing the code, you can reset the Check Engine Light and clear the code using an OBDII scanner.
8. How much does it cost to fix OBDII code P1408 on a 2009 Ford Fusion?
- The cost of fixing the code can vary depending on the specific issue causing it. Repairs may range from DIY cleaning to professional EGR valve replacement, with costs varying accordingly.
9. Can a clogged EGR system cause OBDII code P1408 on a 2009 Ford Fusion?
- Yes, a clogged EGR system can restrict proper exhaust gas flow, triggering the code P1408 due to the EGR flow being out of the self-test range.
10. Are there any preventive maintenance tips to avoid OBDII code P1408 on a 2009 Ford Fusion?
- Regularly inspecting and cleaning the EGR system, ensuring proper engine maintenance, and using quality fuel can help prevent issues that may lead to code P1408.
Discuss the causes and fixes for P1408 2009 Ford Fusion OBDII Code
Code P1408 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.