P1407 2018 GMC Sierra Code - Exhaust Gas Recirculation Control Circuit Shorted
Quick Answer
The P1407 code for a 2018 GMC Sierra indicates a problem with the Exhaust Gas Recirculation (EGR) control circuit being shorted. Common causes include Faulty EGR valve, Wiring issues or shorts in the EGR control circuit, Corrosion or debris blocking the EGR valve. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1407 2018 GMC Sierra indicates Exhaust Gas Recirculation Control Circuit Shorted.
- Common causes
- Common causes include Faulty EGR valve, Wiring issues or shorts in the EGR control circuit, Corrosion or debris blocking the EGR valve.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1407 2018 GMC Sierra Description
The P1407 code for a 2018 GMC Sierra indicates a problem with the Exhaust Gas Recirculation (EGR) control circuit being shorted. The EGR system plays a crucial role in reducing nitrogen oxide emissions by recirculating a portion of the exhaust gases back into the engine's intake system. This helps lower combustion temperatures and reduce harmful emissions.
Common Causes of P1407 2018 GMC Sierra
- Faulty EGR valve
- Wiring issues or shorts in the EGR control circuit
- Corrosion or debris blocking the EGR valve
- Electrical issues such as a blown fuse or damaged connectors
- Engine control module (ECM) failure
Symptoms of P1407 2018 GMC Sierra
- Check Engine Light illuminated on the dashboard
- Reduced engine performance
- Rough idling or stalling
- Increased fuel consumption
- Failed emissions test
How to Fix P1407 2018 GMC Sierra
- Begin by conducting a visual inspection of the EGR system, checking for any obvious signs of damage or corrosion.
- Use a multimeter to test the EGR valve and the control circuit for proper voltage and continuity. Replace any components that show faults.
- Inspect the wiring harness for any signs of damage or shorts. Repair or replace any damaged wiring.
- Clear the diagnostic trouble codes and reset the ECM to see if the issue persists.
- If the problem persists, consider replacing the EGR valve or seeking professional help for a more in-depth diagnosis and repair.
Cost to Fix P1407 2018 GMC Sierra
The cost to repair a P1407 code on a 2018 GMC Sierra can vary depending on the specific cause of the issue. Generally, the cost of parts such as a new EGR valve can range from $150 to $300, while labor costs can add another $100 to $200. Overall, the total repair cost can range from $250 to $500. Keep in mind that labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more precise estimate.
Need more information about the P1407 2018 GMC Sierra code?
Need more information on how to fix the P1407 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1407 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1407 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code P1407 in a 2018 GMC Sierra?
The common symptoms of code P1407 in a 2018 GMC Sierra may include rough idling, decreased fuel efficiency, and the illumination of the check engine light.
2. What does the OBDII code P1407 on a 2018 GMC Sierra indicate?
OBDII code P1407 on a 2018 GMC Sierra indicates a fault in the Exhaust Gas Recirculation (EGR) Control Circuit, specifically a shorted circuit.
3. What are the possible causes of code P1407 in a 2018 GMC Sierra?
Possible causes of code P1407 in a 2018 GMC Sierra include a faulty EGR valve, damaged wiring or connectors in the EGR circuit, or a problem with the EGR control solenoid.
4. How can I diagnose the issue causing OBDII code P1407 on my 2018 GMC Sierra?
To diagnose the issue causing code P1407, you can start by inspecting the EGR valve, checking the wiring and connectors for any damage, and testing the EGR control solenoid for proper functionality.
5. Can I continue driving my 2018 GMC Sierra with OBDII code P1407?
It is not recommended to continue driving your 2018 GMC Sierra with OBDII code P1407 unresolved, as it can lead to further damage to the engine and emission control system.
6. How can I repair OBDII code P1407 on a 2018 GMC Sierra?
Repairing OBDII code P1407 on a 2018 GMC Sierra may involve replacing the faulty EGR valve, repairing or replacing damaged wiring or connectors, or replacing the EGR control solenoid.
7. Will resetting the check engine light resolve OBDII code P1407 on a 2018 GMC Sierra?
Simply resetting the check engine light will not resolve OBDII code P1407 on a 2018 GMC Sierra. The underlying issue causing the fault must be diagnosed and repaired to clear the code.
8. Is it possible to prevent OBDII code P1407 from occurring in my 2018 GMC Sierra?
Regular maintenance of the EGR system, including cleaning the EGR valve and ensuring proper electrical connections, can help prevent issues that may trigger OBDII code P1407 in a 2018 GMC Sierra.
9. Can a DIY enthusiast fix OBDII code P1407 in a 2018 GMC Sierra?
Depending on their skill level and access to tools, a DIY enthusiast may be able to diagnose and repair OBDII code P1407 in a 2018 GMC Sierra, especially if the issue is related to simple fixes like cleaning or replacing components.
10. How much can I expect to pay for repairing OBDII code P1407 on a 2018 GMC Sierra?
The cost of repairing OBDII code P1407 on a 2018 GMC Sierra can vary depending on the specific cause of the issue, but it may range from a few hundred to over a thousand dollars when factoring in parts and labor.
Discuss the causes and fixes for P1407 2018 GMC Sierra OBDII Code
Code P1407 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.