Engine-CodesGMC – P1407 2014 GMC Sierra

P1407 2014 GMC Sierra Code - Exhaust Gas Recirculation Control Circuit Shorted

Quick Answer

The P1407 diagnostic trouble code (DTC) indicates that there is a short circuit in the exhaust gas recirculation (EGR) control circuit of a 2014 GMC Sierra. Common causes include Faulty EGR Valve: A malfunctioning EGR valve can cause electrical issues within the EGR control circuit, Wiring Issues: Damaged or corroded wiring connecting the EGR valve to the ECM can lead to a short circuit, ECM Malfunction: A faulty engine control module can also trigger the P1407 code by disrupting communication with the EGR system. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P1407 2014 GMC Sierra indicates Exhaust Gas Recirculation Control Circuit Shorted.
Common causes
Common causes include Faulty EGR Valve: A malfunctioning EGR valve can cause electrical issues within the EGR control circuit, Wiring Issues: Damaged or corroded wiring connecting the EGR valve to the ECM can lead to a short circuit, ECM Malfunction: A faulty engine control module can also trigger the P1407 code by disrupting communication with the EGR system.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1407 2014 GMC Sierra Description

The P1407 diagnostic trouble code (DTC) indicates that there is a short circuit in the exhaust gas recirculation (EGR) control circuit of a 2014 GMC Sierra. The EGR system is responsible for recirculating a portion of the engine's exhaust gases back into the intake manifold to reduce nitrogen oxide emissions. This code specifically points to an electrical issue within the EGR control circuit, which can affect the proper functioning of the EGR system.

OBDII Code P1407 2014 GMC Sierra - Exhaust Gas Recirculation Control Circuit Shorted
P1407 2014 GMC Sierra Code - Exhaust Gas Recirculation Control Circuit Shorted

Common Causes of P1407 2014 GMC Sierra

  1. Faulty EGR Valve: A malfunctioning EGR valve can cause electrical issues within the EGR control circuit.
  2. Wiring Issues: Damaged or corroded wiring connecting the EGR valve to the ECM can lead to a short circuit.
  3. ECM Malfunction: A faulty engine control module can also trigger the P1407 code by disrupting communication with the EGR system.
  4. Poor Electrical Connections: Loose or poor electrical connections in the EGR control circuit can cause a short circuit.

Symptoms of P1407 2014 GMC Sierra

  1. Check Engine Light: The most common symptom associated with the P1407 code is the illumination of the Check Engine Light on the vehicle's dashboard.
  2. Reduced Fuel Efficiency: A malfunctioning EGR system can lead to decreased fuel efficiency as the engine may not be operating at peak performance.
  3. Rough Engine Idle: The engine may experience rough idling or hesitation when the EGR system is not functioning properly.
  4. Engine Stalling: In severe cases, the engine may stall or have difficulty starting due to EGR system issues.

How to Fix P1407 2014 GMC Sierra

  1. Diagnose the Issue: Use a scan tool to retrieve the DTC and pinpoint the exact location of the short circuit in the EGR control circuit.
  2. Inspect Wiring: Thoroughly inspect the wiring connecting the EGR valve to the ECM for any damage or corrosion.
  3. Test EGR Valve: Check the EGR valve for proper operation and replace it if necessary.
  4. Repair or Replace Wiring: Repair any damaged wiring or connectors in the EGR control circuit to resolve the short circuit.
  5. Clear DTC: After completing the repairs, clear the DTC from the ECM memory and test drive the vehicle to ensure the issue has been resolved.

Cost to Fix P1407 2014 GMC Sierra

The typical repair costs for addressing a P1407 code on a 2014 GMC Sierra can vary depending on the extent of the issue and the cost of parts and labor. On average, the parts needed for this repair may range from $100 to $300, while labor costs can be around $100 to $200. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. It's recommended to check with local repair shops for a more accurate estimate.

Need more information about the P1407 2014 GMC Sierra code?

Need more information on how to fix the P1407 2014 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1407 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1407 2014 GMC Sierra Code

No Frequently Asked Questions about P1407 2014 GMC Sierra Code found.

Discuss the causes and fixes for P1407 2014 GMC Sierra OBDII Code

Code P1407 2014 GMC Sierra comments

No comments found for this page.