P1406 Honda Code - Exhaust Gas Recirculation Valve Position Sensor Circuit Problem
Quick Answer
The P1406 code for Honda vehicles indicates a problem with the Exhaust Gas Recirculation (EGR) Valve Position Sensor Circuit. Common causes include Faulty EGR Valve Position Sensor, Wiring or connector issues in the sensor circuit, Carbon buildup in the EGR system. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1406 Honda indicates Exhaust Gas Recirculation Valve Position Sensor Circuit Problem.
- Common causes
- Common causes include Faulty EGR Valve Position Sensor, Wiring or connector issues in the sensor circuit, Carbon buildup in the EGR system.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1406 Honda Description
The P1406 code for Honda vehicles indicates a problem with the Exhaust Gas Recirculation (EGR) Valve Position Sensor Circuit. The EGR system plays a crucial role in reducing emissions by recirculating a portion of exhaust gases back into the combustion chambers to be re-burned. The EGR Valve Position Sensor is responsible for monitoring the position of the EGR valve, which helps regulate the flow of exhaust gases.
Common Causes of P1406 Honda
- Faulty EGR Valve Position Sensor
- Wiring or connector issues in the sensor circuit
- Carbon buildup in the EGR system
- Vacuum leaks in the EGR system
- EGR valve stuck open or closed
Symptoms of P1406 Honda
- Check Engine Light illuminated on the dashboard
- Rough idle or stalling when idling
- Decreased fuel efficiency
- Engine knocking or pinging noises
- Failed emissions test
How to Fix P1406 Honda
- Diagnose the issue by using a scan tool to read the fault codes and perform a visual inspection of the EGR system components.
- Test the EGR Valve Position Sensor using a multimeter to check for proper resistance values.
- Inspect and clean the EGR valve and passages to remove any carbon buildup.
- Check the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Replace the faulty EGR Valve Position Sensor if it fails testing, ensuring proper installation and calibration.
Cost to Fix P1406 Honda
The cost of repairing a P1406 code in a Honda vehicle can vary depending on the specific issue causing the code and the labor rates in your area. Typically, the cost of parts for this repair ranges from $100 to $300, with labor costs adding another $100 to $200. Overall, you can expect to pay anywhere from $200 to $500 for this repair, but prices can fluctuate based on location, vehicle make and model, and the extent of the issue. It's recommended to get quotes from local auto repair shops to determine the exact cost for your situation.
Need more information about the P1406 Honda code?
Need more information on how to fix the P1406 Honda code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1406 Honda code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1406 Honda Code
What does the OBDII code P1406 mean for a Honda?
The P1406 code indicates a problem with the Exhaust Gas Recirculation (EGR) valve position sensor circuit, which monitors the EGR valve's performance.
What are the symptoms of code P1406 on a Honda?
Common symptoms include poor engine performance, rough idle, reduced fuel efficiency, and the illumination of the check engine light.
What causes the P1406 code on a Honda?
Possible causes include a faulty EGR valve position sensor, wiring issues in the sensor circuit, carbon buildup in the EGR valve, or a damaged EGR valve.
Can driving with code P1406 damage my Honda?
While the car may remain drivable, prolonged driving with this code can lead to increased emissions, engine performance issues, and potential damage to other components if left unresolved.
How can I diagnose the P1406 code on a Honda?
Inspect the EGR valve and position sensor for damage, check the wiring and connections for faults, and test the sensor using a multimeter to verify proper operation.
How do I fix code P1406 on a Honda?
Repairs may include cleaning or replacing the EGR valve, replacing the EGR position sensor, repairing damaged wiring, or updating the vehicle’s ECU software if needed.
How much does it cost to fix the P1406 code on a Honda?
Repair costs vary but typically range from $150 to $500 depending on whether the EGR valve or position sensor needs replacement and labor costs.
Can I clean the EGR valve to resolve the P1406 code on a Honda?
Yes, carbon buildup is a common issue, and cleaning the EGR valve can sometimes resolve the code if the sensor and wiring are functional.
What tools are needed to fix the P1406 code on a Honda?
You may need a diagnostic scan tool, a multimeter for testing circuits, basic hand tools for removing components, and EGR valve cleaner if cleaning is required.
Does a faulty EGR valve affect emissions?
Yes, a faulty EGR valve can increase nitrogen oxide (NOx) emissions, negatively impacting the vehicle’s environmental performance.
Discuss the causes and fixes for P1406 Honda OBDII Code
Code P1406 Honda comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.