P1405 2012 Ford Fusion Code - Differential Pressure Feedback Sensor Upstream Hose Off or Plugged
Quick Answer
The P1405 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates that the Differential Pressure Feedback Sensor (DPFE) upstream hose is either disconnected or obstructed. Common causes include Disconnected or loose upstream hose of the DPFE sensor, Obstruction or blockage in the upstream hose, Hose deterioration or damage. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1405 2012 Ford Fusion indicates Differential Pressure Feedback Sensor Upstream Hose Off or Plugged.
- Common causes
- Common causes include Disconnected or loose upstream hose of the DPFE sensor, Obstruction or blockage in the upstream hose, Hose deterioration or damage.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1405 2012 Ford Fusion Description
The P1405 diagnostic trouble code (DTC) for a 2012 Ford Fusion indicates that the Differential Pressure Feedback Sensor (DPFE) upstream hose is either disconnected or obstructed. The DPFE sensor is a crucial component of the vehicle's exhaust gas recirculation (EGR) system, which helps reduce emissions by recirculating a portion of the exhaust gases back into the engine for combustion. The DPFE sensor measures the pressure difference between the exhaust gas before and after it passes through the EGR system, providing feedback to the engine control module (ECM) to adjust the EGR flow rate accordingly.
Common Causes of P1405 2012 Ford Fusion
- Disconnected or loose upstream hose of the DPFE sensor
- Obstruction or blockage in the upstream hose
- Hose deterioration or damage
- Faulty DPFE sensor
- EGR system leaks
Symptoms of P1405 2012 Ford Fusion
- Decreased fuel efficiency
- Rough idling or engine hesitation
- Increased emissions
- Engine stalling
- Check Engine Light illuminated
How to Fix P1405 2012 Ford Fusion
- Inspect the upstream hose of the DPFE sensor for disconnection, damage, or blockage.
- Reconnect or replace the upstream hose if disconnected or damaged.
- Clean out any obstructions or blockages in the hose or EGR system.
- Test the DPFE sensor for proper operation and replace if necessary.
- Clear the DTC and reset the ECM to monitor the EGR system's performance.
Cost to Fix P1405 2012 Ford Fusion
The typical repair costs for addressing a P1405 code on a 2012 Ford Fusion can range from $100 to $300, depending on the specific cause of the issue and the labor rates at the repair shop. This estimate includes the cost of parts such as a new DPFE sensor or hose, as well as labor for diagnosis, repair, and resetting the ECM. It's important to note that labor rates can vary between different shops and locations, so it's advisable to check with local repair facilities for a more accurate estimate.
Need more information about the P1405 2012 Ford Fusion code?
Need more information on how to fix the P1405 2012 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1405 2012 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1405 2012 Ford Fusion Code
1. What does OBDII code P1405 mean on a 2012 Ford Fusion?
P1405 indicates that the Differential Pressure Feedback (DPFE) sensor upstream hose is either disconnected or clogged, which affects the exhaust gas recirculation (EGR) system.
2. What are the common symptoms of code P1405 in a 2012 Ford Fusion?
Symptoms include reduced engine performance, rough idling, poor fuel efficiency, and the check engine light being illuminated.
3. What causes the P1405 code to trigger in a 2012 Ford Fusion?
The code is typically caused by a disconnected or plugged DPFE sensor hose, a faulty DPFE sensor, or carbon buildup in the EGR system.
4. Can a clogged DPFE sensor hose damage the engine?
While it may not directly damage the engine, it can cause performance issues and increased emissions if left unaddressed.
5. How do you fix the P1405 code on a 2012 Ford Fusion?
Inspect and reconnect or replace any damaged or clogged hoses, clean carbon buildup in the EGR system, and replace the DPFE sensor if necessary.
6. How can I check if the DPFE sensor hoses are clogged?
Remove the hoses and visually inspect them for blockages or use compressed air to ensure they are clear.
7. Is it safe to drive with a P1405 code on a 2012 Ford Fusion?
Driving with this code is not recommended because it can lead to poor engine performance and higher emissions.
8. How much does it cost to repair a P1405 issue on a 2012 Ford Fusion?
Repairs can range from $50 to $300, depending on whether you need to clean the system, replace hoses, or install a new DPFE sensor.
9. Can a faulty EGR valve cause a P1405 code in a 2012 Ford Fusion?
While the EGR valve itself may not directly cause this code, a malfunctioning EGR system can contribute to associated issues.
10. How can I prevent the P1405 code from recurring?
Regularly inspect and clean the EGR system, ensure the DPFE hoses are secure, and address any exhaust or sensor issues promptly.
Discuss the causes and fixes for P1405 2012 Ford Fusion OBDII Code
Code P1405 2012 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.