P1404 KIA Code - Leak Detection Module Solenoid Valve Circuit Fault
Quick Answer
The P1404 diagnostic trouble code for KIA vehicles indicates a fault in the Leak Detection Module (LDM) solenoid valve circuit. Common causes include Faulty solenoid valve within the Leak Detection Module, Damaged wiring or connectors in the solenoid valve circuit, Blown fuse related to the evaporative emission control system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1404 KIA indicates Leak Detection Module Solenoid Valve Circuit Fault.
- Common causes
- Common causes include Faulty solenoid valve within the Leak Detection Module, Damaged wiring or connectors in the solenoid valve circuit, Blown fuse related to the evaporative emission control system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1404 KIA Description
The P1404 diagnostic trouble code for KIA vehicles indicates a fault in the Leak Detection Module (LDM) solenoid valve circuit. The LDM is a crucial component of the vehicle's evaporative emission control system, which is responsible for capturing and storing fuel vapors to prevent them from escaping into the atmosphere. The solenoid valve within the LDM controls the flow of vacuum to the system, allowing it to function properly.
Common Causes of P1404 KIA
- Faulty solenoid valve within the Leak Detection Module
- Damaged wiring or connectors in the solenoid valve circuit
- Blown fuse related to the evaporative emission control system
- Corrosion or buildup within the solenoid valve
Symptoms of P1404 KIA
- Check Engine Light illuminated on the dashboard
- Reduced fuel efficiency
- Rough idling or stalling
- Difficulty starting the vehicle
- Failure to pass emissions test
How to Fix P1404 KIA
- Begin by using an OBD-II scanner to confirm the P1404 code and identify the specific fault in the solenoid valve circuit.
- Inspect the solenoid valve, wiring, and connectors for any visible damage or corrosion. Replace any components that are faulty.
- Check and replace any blown fuses related to the evaporative emission control system.
- Clear the diagnostic trouble codes from the vehicle's computer and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, consult a professional mechanic for further diagnosis and repair.
Cost to Fix P1404 KIA
The typical repair costs for addressing a P1404 code in a KIA vehicle can range from $150 to $400, depending on the extent of the damage and the specific components that need to be replaced. This estimate includes parts and labor. However, it is important to note that prices can vary based on location, vehicle make and model, and labor rates at auto repair shops. It is advisable to obtain quotes from multiple sources to ensure an accurate cost estimate.
Need more information about the P1404 KIA code?
Need more information on how to fix the P1404 KIA code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1404 KIA code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1404 KIA Code
What does the OBDII code P1404 mean on a Kia?
The P1404 code indicates a fault in the Leak Detection Module Solenoid Valve Circuit, which is part of the vehicle's evaporative emissions system.
What are the symptoms of OBDII code P1404 in a Kia?
Symptoms may include the check engine light turning on, reduced fuel efficiency, and possible difficulty passing emissions tests.
What causes the P1404 code in a Kia?
Common causes include a faulty leak detection module solenoid valve, damaged wiring, a loose or corroded electrical connection, or issues with the EVAP system.
Can I drive my Kia with the P1404 code active?
While the vehicle may still be drivable, it’s best to address the issue promptly to avoid potential emissions system damage and ensure compliance with emissions regulations.
How can I diagnose the P1404 code in a Kia?
You can use an OBDII scanner to confirm the code, then inspect the solenoid valve, wiring, and connections for visible damage or faults.
How do I fix the P1404 code on a Kia?
Repairs may involve replacing the leak detection module solenoid valve, repairing damaged wiring, or cleaning corroded electrical connections.
Is the P1404 code covered under warranty for Kia vehicles?
This depends on your vehicle’s warranty terms; emissions system components may be covered under certain warranties. Check with your dealership for details.
How much does it cost to repair the P1404 code on a Kia?
Repair costs can vary, but replacing the solenoid valve typically costs $100–$300, including parts and labor.
Can a P1404 code cause other issues in my Kia?
If left unresolved, it may lead to further EVAP system malfunctions or cause your vehicle to fail emissions testing.
Will clearing the P1404 code fix the problem in a Kia?
Clearing the code may temporarily remove the check engine light but won’t resolve the underlying issue causing the fault.
Discuss the causes and fixes for P1404 KIA OBDII Code
Code P1404 KIA comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.