P1404 Jeep Code - EGR Position Sensor Rationality Closed
Quick Answer
The P1404 diagnostic trouble code (DTC) in a Jeep indicates an issue with the Exhaust Gas Recirculation (EGR) system, specifically related to the EGR position sensor rationality being closed. Common causes include Faulty EGR Position Sensor: A defective EGR position sensor can inaccurately monitor the position of the EGR valve, triggering the P1404 code, Malfunctioning EGR Valve: A malfunctioning EGR valve can fail to open or close properly, leading to issues with the EGR system, Clogged EGR Passages: Build-up of carbon deposits or debris in the EGR passages can restrict the flow of exhaust gases, causing the EGR system to malfunction. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1404 Jeep indicates EGR Position Sensor Rationality Closed.
- Common causes
- Common causes include Faulty EGR Position Sensor: A defective EGR position sensor can inaccurately monitor the position of the EGR valve, triggering the P1404 code, Malfunctioning EGR Valve: A malfunctioning EGR valve can fail to open or close properly, leading to issues with the EGR system, Clogged EGR Passages: Build-up of carbon deposits or debris in the EGR passages can restrict the flow of exhaust gases, causing the EGR system to malfunction.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1404 Jeep Description
The P1404 diagnostic trouble code (DTC) in a Jeep indicates an issue with the Exhaust Gas Recirculation (EGR) system, specifically related to the EGR position sensor rationality being closed. The EGR system helps reduce harmful emissions by recirculating a portion of the exhaust gases back into the engine's intake manifold. This process helps lower combustion temperatures, reducing the formation of nitrogen oxides.
Common Causes of P1404 Jeep
- Faulty EGR Position Sensor: A defective EGR position sensor can inaccurately monitor the position of the EGR valve, triggering the P1404 code.
- Malfunctioning EGR Valve: A malfunctioning EGR valve can fail to open or close properly, leading to issues with the EGR system.
- Clogged EGR Passages: Build-up of carbon deposits or debris in the EGR passages can restrict the flow of exhaust gases, causing the EGR system to malfunction.
- Wiring Issues: Damaged or corroded wiring connections related to the EGR system can disrupt the communication between components, triggering the P1404 code.
- EGR Control Solenoid Problem: A faulty EGR control solenoid can prevent the EGR valve from operating correctly, leading to issues with the EGR system.
Symptoms of P1404 Jeep
- Check Engine Light: The most common symptom associated with the P1404 code is the illumination of the Check Engine Light on the vehicle's dashboard.
- Rough Idling: The engine may idle roughly or inconsistently, leading to vibrations or shaking when the vehicle is at a standstill.
- Reduced Fuel Efficiency: A faulty EGR system can cause decreased fuel efficiency, resulting in more frequent trips to the gas station.
- Engine Misfires: The engine may misfire due to improper combustion caused by the malfunctioning EGR system.
- Engine Stalling: In severe cases, the engine may stall while driving or idling, posing a safety hazard.
How to Fix P1404 Jeep
- Diagnostic Scan: Use an OBD-II scanner to retrieve the P1404 code and identify the specific cause of the issue within the EGR system.
- Inspect EGR Components: Check the EGR position sensor, EGR valve, EGR passages, wiring connections, and EGR control solenoid for any signs of damage or malfunction.
- Replace Faulty Parts: Replace any faulty components identified during the inspection, such as the EGR position sensor, EGR valve, or EGR control solenoid.
- Clean EGR Passages: If clogged EGR passages are the issue, clean them thoroughly to ensure proper flow of exhaust gases through the system.
- Clear Codes: After completing the repairs, clear the P1404 code from the vehicle's computer system and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1404 Jeep
The cost of repairing a P1404 code in a Jeep can vary depending on the specific cause of the issue and the cost of parts and labor. On average, the repair cost for this issue can range from $150 to $500, including both parts and labor. However, it is essential to note that the actual cost may vary based on factors such as the location of the repair shop, the make and model of the vehicle, and the type of engine. Additionally, diagnostic time and labor rates at auto repair shops can range from $80 to $150 per hour, with rates potentially higher in metropolitan areas or at dealerships and lower at independent shops. To obtain a more accurate estimate, it is recommended to contact local auto repair shops for pricing information specific to your vehicle.
Need more information about the P1404 Jeep code?
Need more information on how to fix the P1404 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1404 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1404 Jeep Code
1. What are the common symptoms of OBDII code P1404 in a Jeep related to the EGR Position Sensor Rationality Closed?
The common symptoms include rough idling, engine hesitation, reduced fuel efficiency, and an illuminated Check Engine Light.
2. What are the possible causes of OBDII code P1404 in a Jeep?
The code P1404 in a Jeep is typically triggered by issues with the EGR valve, EGR position sensor, wiring harness, or the PCM (Powertrain Control Module).
3. How can I diagnose the cause of OBDII code P1404 in my Jeep?
Diagnosing the code involves checking the EGR valve and position sensor for proper operation, inspecting the wiring for any damage, and using a scan tool to monitor EGR system parameters.
4. Can I continue driving my Jeep with OBDII code P1404 active?
While it may be possible to drive the vehicle with the code active, it is not recommended as it can lead to further engine damage and reduced performance. It's best to address the issue promptly.
5. How can I repair OBDII code P1404 in my Jeep?
Repairing the code may involve cleaning or replacing the EGR valve, replacing the EGR position sensor, repairing any damaged wiring, or reprogramming the PCM.
6. Are there any DIY tips for fixing OBDII code P1404 in a Jeep?
DIY tips include checking and cleaning the EGR valve, ensuring proper electrical connections, and using a multimeter to test the EGR position sensor.
7. How much does it typically cost to repair OBDII code P1404 in a Jeep?
The cost of repair can vary depending on the exact cause of the code, but it may range from $100 to $500, including parts and labor.
8. Can a faulty EGR valve cause OBDII code P1404 in a Jeep?
Yes, a faulty EGR valve can cause code P1404 in a Jeep if it fails to provide the correct feedback to the PCM regarding the EGR position.
9. Will resetting the Check Engine Light make OBDII code P1404 disappear permanently?
Resetting the Check Engine Light may temporarily clear the code, but if the underlying issue causing P1404 is not addressed, the code is likely to reappear.
10. Is it necessary to visit a mechanic for OBDII code P1404 diagnosis and repair, or can I fix it myself?
While some DIY fixes are possible, it is recommended to have a professional mechanic diagnose and repair OBDII code P1404 in a Jeep to ensure a proper and long-lasting solution.
Discuss the causes and fixes for P1404 Jeep OBDII Code
Code P1404 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.