P1404 Audi Code - EGR Flow Basic Setting Not Carried Out
Quick Answer
The P1404 diagnostic trouble code (DTC) for Audi vehicles indicates that the EGR (Exhaust Gas Recirculation) flow basic setting has not been carried out. Common causes include Faulty EGR valve, Clogged EGR passages, Electrical issues with the EGR system. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1404 Audi indicates EGR Flow Basic Setting Not Carried Out.
- Common causes
- Common causes include Faulty EGR valve, Clogged EGR passages, Electrical issues with the EGR system.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1404 Audi Description
The P1404 diagnostic trouble code (DTC) for Audi vehicles indicates that the EGR (Exhaust Gas Recirculation) flow basic setting has not been carried out. The EGR system is responsible for recirculating a portion of the engine's exhaust gases back into the intake system to reduce emissions and improve fuel efficiency. The basic setting refers to the calibration process that ensures the EGR system is functioning correctly and in sync with the engine's performance.
Common Causes of P1404 Audi
- Faulty EGR valve
- Clogged EGR passages
- Electrical issues with the EGR system
- Malfunctioning EGR temperature sensor
- Vacuum leaks in the EGR system
Symptoms of P1404 Audi
- Decreased fuel efficiency
- Reduced engine power and performance
- Rough idling or stalling
- Check Engine Light illuminated
- Failed emissions test
How to Fix P1404 Audi
- Diagnose the issue by using a scan tool to retrieve the P1404 code and inspect the EGR system components.
- Clean or replace the EGR valve and passages to ensure proper flow of exhaust gases.
- Test the EGR temperature sensor and replace if necessary.
- Check for any electrical issues in the EGR system and repair or replace wiring as needed.
- Perform a basic setting procedure for the EGR flow to calibrate the system and ensure proper operation.
Cost to Fix P1404 Audi
The typical repair costs for addressing a P1404 code in an Audi vehicle can range from $200 to $500, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that the actual cost may vary based on the location of the repair shop, the make and model of the vehicle, and the type of engine. Additionally, diagnosis time and labor rates at auto repair shops can vary, with hourly rates typically ranging between $80 and $150. It's recommended to contact local repair shops for a more accurate cost estimate based on the specific circumstances.
Need more information about the P1404 Audi code?
Need more information on how to fix the P1404 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1404 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1404 Audi Code
What does the OBDII code P1404 mean for an Audi?
P1404 indicates that the Exhaust Gas Recirculation (EGR) system’s basic settings have not been carried out properly, often due to a malfunction or incorrect calibration.
What are the common symptoms of the P1404 code?
Symptoms may include a check engine light, rough idling, decreased fuel efficiency, engine hesitation, or excessive emissions.
What causes the P1404 code to appear on an Audi?
Common causes include a faulty EGR valve, carbon buildup in the EGR system, wiring or connector issues, or a failed attempt to perform basic settings during diagnostics.
Can driving with the P1404 code damage my Audi?
Driving with this code for an extended period can lead to increased engine wear, reduced fuel economy, and possible emission system damage.
How can I fix the P1404 code on my Audi?
Start by cleaning or replacing the EGR valve, checking connections and wiring, and ensuring proper basic settings are performed using a diagnostic tool.
Do I need special tools to clear the P1404 code?
Yes, a compatible OBDII scan tool is needed to perform the EGR basic settings and clear the code after repairs.
Can the P1404 code be caused by software issues?
Yes, outdated or corrupted ECM software can sometimes cause improper EGR calibration, leading to the P1404 code.
How much does it cost to repair the P1404 code on an Audi?
Costs vary, but cleaning the EGR valve may cost around $100, while replacing it could range from $200 to $500 depending on labor and parts.
Should I clean or replace the EGR valve for the P1404 code?
Start with cleaning the valve if it’s not severely damaged; replace it if cleaning doesn’t resolve the issue or the valve is faulty.
How can I prevent the P1404 code from recurring?
Regular maintenance, including cleaning the EGR system and ensuring diagnostic procedures are properly completed, can help prevent this code from recurring.
Discuss the causes and fixes for P1404 Audi OBDII Code
Code P1404 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.