Engine-CodesInfiniti – P1401 Infiniti

P1401 Infiniti Code - EGR Temperature Sensor

Quick Answer

The P1401 diagnostic trouble code (DTC) in Infiniti vehicles refers to a fault in the EGR temperature sensor circuit. Common causes include Faulty EGR Temperature Sensor: The most common cause of the P1401 code is a malfunctioning EGR temperature sensor, Wiring Issues: Damaged or corroded wiring in the EGR temperature sensor circuit can also trigger this code, EGR System Blockage: A blockage in the EGR system can affect the sensor's readings and lead to the P1401 code. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means
P1401 Infiniti indicates EGR Temperature Sensor.
Common causes
Common causes include Faulty EGR Temperature Sensor: The most common cause of the P1401 code is a malfunctioning EGR temperature sensor, Wiring Issues: Damaged or corroded wiring in the EGR temperature sensor circuit can also trigger this code, EGR System Blockage: A blockage in the EGR system can affect the sensor's readings and lead to the P1401 code.
Severity
Moderate - service should be scheduled soon.
Can I drive?
The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Table of contents Created and updated by William Orellana on Sep 10, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1401 Infiniti Description

The P1401 diagnostic trouble code (DTC) in Infiniti vehicles refers to a fault in the EGR temperature sensor circuit. The EGR (Exhaust Gas Recirculation) system plays a crucial role in reducing emissions and improving fuel efficiency in modern vehicles. The EGR temperature sensor is responsible for monitoring the temperature of the exhaust gas before it enters the EGR system. This information is used by the engine control module (ECM) to adjust the EGR flow rate and optimize engine performance.

OBDII Code P1401 Infiniti - EGR Temperature Sensor
P1401 Infiniti Code - EGR Temperature Sensor

Common Causes of P1401 Infiniti

  1. Faulty EGR Temperature Sensor: The most common cause of the P1401 code is a malfunctioning EGR temperature sensor.
  2. Wiring Issues: Damaged or corroded wiring in the EGR temperature sensor circuit can also trigger this code.
  3. EGR System Blockage: A blockage in the EGR system can affect the sensor's readings and lead to the P1401 code.
  4. ECM Malfunction: In rare cases, a malfunction in the engine control module (ECM) can cause erroneous readings from the EGR temperature sensor.
  5. Vacuum Leaks: Any vacuum leaks in the EGR system can disrupt the sensor's operation and trigger the P1401 code.

Symptoms of P1401 Infiniti

  1. Check Engine Light: The most common symptom associated with the P1401 code is the illumination of the check engine light on the dashboard.
  2. Reduced Fuel Efficiency: A malfunctioning EGR temperature sensor can lead to decreased fuel efficiency as the EGR system may not operate optimally.
  3. Rough Idle: The engine may experience rough idling or hesitation when the EGR system is not functioning correctly.
  4. Increased Emissions: A faulty EGR temperature sensor can result in higher emissions output, potentially causing the vehicle to fail emissions tests.
  5. Engine Misfires: In some cases, the engine may experience misfires or lack of power due to improper EGR system operation.

How to Fix P1401 Infiniti

  1. Diagnostic: Begin by using a diagnostic scanner to retrieve the P1401 code and identify the specific cause of the issue.
  2. Inspect Wiring: Check the wiring harness for any damage or corrosion, repairing or replacing as necessary.
  3. Test EGR Temperature Sensor: Test the EGR temperature sensor using a multimeter to determine if it is faulty.
  4. Clean EGR System: Inspect and clean the EGR system to ensure proper operation and remove any blockages that may be affecting the sensor.
  5. Replace EGR Temperature Sensor: If the sensor is found to be faulty, replace it with a new, OEM-quality sensor to resolve the issue.

Cost to Fix P1401 Infiniti

The cost of repairing a P1401 code in an Infiniti vehicle can vary depending on the specific cause of the issue and the labor rates at the repair shop. On average, the cost of replacing an EGR temperature sensor ranges from $150 to $300, including parts and labor. Additional costs may apply if wiring repairs or other components need to be replaced. It is advisable to consult with a qualified mechanic or repair shop to get an accurate estimate based on the specific circumstances of your vehicle. Keep in mind that labor rates can vary widely, so it's recommended to research local rates for a more precise cost estimate.

When is the Code Detected?

An excessively low voltage from the Exhaust Gas Recirculation (EGR) temperature sensor is sent to Engine Control Module (ECM) even when engine coolant temperature is low, or an excessively high voltage from the EGR temperature sensor is sent to ECM even when engine coolant temperature is high.

Need more information about the P1401 Infiniti code?

Need more information on how to fix the P1401 Infiniti code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1401 Infiniti code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1401 Infiniti Code

No Frequently Asked Questions about P1401 Infiniti Code found.

Discuss the causes and fixes for P1401 Infiniti OBDII Code

Code P1401 Infiniti comments

No comments found for this page.