P1400 Lexus Code - Sub-Throttle Position Sensor Circuit Fault
Quick Answer
The P1400 code for Lexus vehicles refers to a fault in the Sub-Throttle Position Sensor Circuit. Common causes include Faulty sub-throttle position sensor, Wiring harness issues, Connector problems. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- P1400 Lexus indicates Sub-Throttle Position Sensor Circuit Fault.
- Common causes
- Common causes include Faulty sub-throttle position sensor, Wiring harness issues, Connector problems.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1400 Lexus Description
The P1400 code for Lexus vehicles refers to a fault in the Sub-Throttle Position Sensor Circuit. This sensor is responsible for monitoring the position of the sub-throttle valve, which is a component in the intake system that helps regulate air flow into the engine. When this sensor circuit malfunctions, it can lead to incorrect readings being sent to the engine control module, causing issues with fuel delivery and air-fuel mixture. This can result in poor engine performance, reduced fuel efficiency, and potentially even engine stalling or hesitation.
Common Causes of P1400 Lexus
- Faulty sub-throttle position sensor
- Wiring harness issues
- Connector problems
- Sensor circuit malfunction
- Throttle body assembly problems
Symptoms of P1400 Lexus
- Check engine light illuminated on the dashboard
- Reduced engine performance or power
- Hesitation or stumbling during acceleration
- Poor fuel efficiency
- Engine stalling or rough idling
How to Fix P1400 Lexus
- Use an OBD-II scanner to retrieve the fault code and verify the issue.
- Inspect the wiring harness and connectors for any signs of damage or corrosion.
- Test the sub-throttle position sensor for proper function and replace if necessary.
- Clear the fault code from the engine control module and reset the system.
- Test drive the vehicle to ensure the issue has been resolved and the check engine light does not reappear.
Cost to Fix P1400 Lexus
The cost of repairing a P1400 code for a Lexus vehicle can vary depending on the specific cause of the issue and the shop's labor rates. In general, the cost of parts for this repair can range from $100 to $300, with labor costs adding another $100 to $200. This brings the total repair cost to approximately $200 to $500. It's important to note that these are rough estimates and actual costs may vary based on the location, vehicle make and model, and other factors. It's recommended to consult with a trusted mechanic or repair shop for a more accurate cost estimate.
Need more information about the P1400 Lexus code?
Need more information on how to fix the P1400 Lexus code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1400 Lexus code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1400 Lexus Code
What does the OBDII code P1400 mean on a Lexus?
P1400 indicates a fault in the sub-throttle position sensor circuit, which monitors the position of the sub-throttle valve to ensure proper engine performance.
What are the common symptoms of code P1400 in a Lexus?
Symptoms may include poor acceleration, reduced fuel efficiency, rough idling, and an illuminated check engine light.
What causes the P1400 code to appear on a Lexus?
Common causes include a faulty sub-throttle position sensor, damaged wiring or connectors, or issues with the engine control module (ECM).
Can I drive my Lexus with the P1400 code active?
While the car may still be drivable, it’s not recommended as it can lead to reduced performance, increased fuel consumption, and potential engine damage if left unresolved.
How do I diagnose the P1400 code on my Lexus?
Start by inspecting the sub-throttle position sensor, its wiring, and connectors for damage or corrosion. Use a multimeter to test the sensor’s voltage and resistance.
How do I fix the P1400 code on a Lexus?
Repairs may involve replacing the sub-throttle position sensor, repairing damaged wiring, or reprogramming the ECM if necessary.
How much does it cost to fix the P1400 code on a Lexus?
The cost varies but typically ranges from $150 to $300 for parts and labor, depending on whether the sensor or wiring needs to be replaced.
Will clearing the P1400 code solve the problem?
Clearing the code may temporarily turn off the check engine light, but the issue will reoccur unless the underlying problem is fixed.
Can a dirty throttle body cause the P1400 code on a Lexus?
A dirty throttle body is unlikely to directly cause the P1400 code, but it can contribute to related performance issues. Cleaning it may help improve overall functionality.
Does the P1400 code affect emissions?
Yes, a malfunctioning sub-throttle position sensor can impact air-fuel mixture and emissions, potentially causing the vehicle to fail an emissions test.
Discuss the causes and fixes for P1400 Lexus OBDII Code
Code P1400 Lexus comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.