P1391 Audi Code - Camshaft Position Sensor Bank 2 Short To Ground
Quick Answer
The P1391 diagnostic trouble code (DTC) for Audi vehicles specifically indicates a problem with the camshaft position sensor in Bank 2 shorting to ground. Common causes include Faulty camshaft position sensor, Wiring issues or shorts in the sensor circuit, Corrosion or poor connection at the sensor or ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1391 Audi indicates Camshaft Position Sensor Bank 2 Short To Ground.
- Common causes
- Common causes include Faulty camshaft position sensor, Wiring issues or shorts in the sensor circuit, Corrosion or poor connection at the sensor or ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1391 Audi Description
The P1391 diagnostic trouble code (DTC) for Audi vehicles specifically indicates a problem with the camshaft position sensor in Bank 2 shorting to ground. The camshaft position sensor is a critical component that helps the engine control module (ECM) monitor the position of the camshaft relative to the crankshaft. This information is essential for precise fuel delivery and ignition timing, ensuring optimal engine performance and efficiency.
Common Causes of P1391 Audi
- Faulty camshaft position sensor
- Wiring issues or shorts in the sensor circuit
- Corrosion or poor connection at the sensor or ECM
- ECM software or hardware malfunction
- Mechanical damage to the camshaft position sensor
Symptoms of P1391 Audi
- Rough idling or engine stalling
- Poor acceleration and reduced engine performance
- Engine misfires or hesitation during acceleration
- Check Engine light illuminated on the dashboard
How to Fix P1391 Audi
- Diagnostic Testing: Begin by using a scan tool to confirm the P1391 code and perform a comprehensive diagnosis to pinpoint the exact cause of the issue.
- Sensor Replacement: Replace the camshaft position sensor in Bank 2 with a new, OEM-quality sensor to ensure accurate readings and proper operation.
- Wiring Inspection: Check the sensor wiring harness for any signs of damage, corrosion, or shorts. Repair or replace any damaged wiring as needed.
- ECM Reset: Clear the stored fault codes and reset the ECM to ensure proper communication with the new sensor.
- Road Test: After repairs are completed, road test the vehicle to verify that the issue has been resolved and that the engine is operating smoothly.
Cost to Fix P1391 Audi
The cost of repairing a P1391 code in an Audi can vary depending on the specific model, year, and labor rates in your area. On average, the parts for a camshaft position sensor replacement can range from $50 to $150, while labor costs can be between $100 and $200. Overall, the total repair cost for addressing a camshaft position sensor Bank 2 short to ground issue may range from $150 to $350. It is advisable to consult with a qualified mechanic or dealership for a more accurate estimate based on your vehicle's specific requirements.
Need more information about the P1391 Audi code?
Need more information on how to fix the P1391 Audi code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1391 Audi code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1391 Audi Code
What does OBD-II code P1391 mean for an Audi?
Code P1391 indicates a problem with the camshaft position sensor on Bank 2, specifically a short to ground in the electrical circuit.
What are the common symptoms of code P1391?
Symptoms may include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and sometimes difficulty starting the engine.
What causes code P1391 on an Audi?
Common causes include a damaged or faulty camshaft position sensor, wiring issues such as frayed or shorted wires, or a problem with the sensor’s connector.
Can driving with code P1391 damage my Audi?
Driving with this code can lead to performance issues and, over time, potentially cause damage to the engine due to improper timing.
How do I diagnose code P1391?
Start by inspecting the camshaft position sensor and its wiring for visible damage. Use a multimeter to check for shorts or open circuits in the wiring harness.
How do I fix code P1391 on an Audi?
Repairs may involve replacing the camshaft position sensor, repairing or replacing damaged wiring, or cleaning and resecuring electrical connectors.
Can a weak battery cause code P1391?
While unlikely, electrical issues such as a weak battery or poor ground connections can indirectly contribute to sensor-related faults.
How much does it cost to repair code P1391?
Costs vary depending on the issue, but replacing a camshaft position sensor typically ranges from $100 to $300, including parts and labor.
Do I need special tools to fix code P1391?
Basic tools like a multimeter, socket set, and wiring repair tools are usually sufficient. Some repairs may require an OBD-II scanner for diagnostics.
Can code P1391 reappear after repairs?
Yes, if underlying issues like damaged wiring or poor connections are not fully addressed, the code may reappear.
Discuss the causes and fixes for P1391 Audi OBDII Code
Code P1391 Audi comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.