P1382 Code - Cylinder Position Sensor 1 No Signal
Quick Answer
The P1382 diagnostic trouble code (DTC) indicates that there is no signal being received from Cylinder Position Sensor 1 in the engine. Common causes include Faulty Cylinder Position Sensor 1, Damaged or corroded wiring/connectors, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1382 indicates Cylinder Position Sensor 1 No Signal.
- Common causes
- Common causes include Faulty Cylinder Position Sensor 1, Damaged or corroded wiring/connectors, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1382 Description
The P1382 diagnostic trouble code (DTC) indicates that there is no signal being received from Cylinder Position Sensor 1 in the engine. This sensor is responsible for detecting the position of the cylinder in relation to the crankshaft. Without this signal, the engine control module (ECM) is unable to accurately control fuel injection timing, ignition timing, and other critical engine functions.
Common Causes of P1382
- Faulty Cylinder Position Sensor 1
- Damaged or corroded wiring/connectors
- ECM malfunction
- Poor electrical connection
- Engine timing belt issues
Symptoms of P1382
- Rough idling
- Misfires
- Poor acceleration
- Decreased fuel efficiency
- Engine stalling
How to Fix P1382
- Begin by diagnosing the issue using a scan tool to confirm the P1382 code and identify the specific problem.
- Inspect the wiring and connectors associated with Cylinder Position Sensor 1 for any damage or corrosion. Repair or replace as necessary.
- Test the sensor using a multimeter to ensure it is functioning correctly. Replace the sensor if it is faulty.
- Clear the DTC and reset the ECM to see if the issue persists. Test drive the vehicle to confirm that the problem has been resolved.
- If the problem persists, further diagnostics may be required to identify any underlying issues with the ECM or engine timing components.
Cost to Fix P1382
The repair costs for addressing a P1382 code can vary depending on the specific cause of the issue. Typically, replacing a faulty Cylinder Position Sensor 1 can range from $100 to $200, including parts and labor. However, if additional diagnostics or repairs are needed, the total cost could increase. It's advisable to consult with a qualified mechanic or auto repair shop for an accurate estimate based on your vehicle's make and model, as well as the extent of the repair needed. Labor rates at auto repair shops can vary, so it's recommended to research local rates for a more precise cost estimate.
Need more information about the P1382 code?
Need more information on how to fix the P1382 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1382 code diagnosed by a professional: Find a repair shop in your area
Code P1382 Information for Specific Makes
- P1382 Acura — Cylinder Position Sensor 1 No Signal
- P1382 Honda — Cylinder Position Sensor 1 No Signal
- P1382 Isuzu — Cylinder Position Sensor 1 No Signal
- P1382 Mazda — Camshaft Position Timing Solenoid 1 Circuit
- P1382 Suzuki — Wheel Speed Sensor Malfunction
Frequently Asked Questions about P1382 Code
1. What are the common symptoms of OBDII code P1382 (Cylinder Position Sensor 1 No Signal)?
- Common symptoms include rough idling, poor engine performance, misfires, and difficulty starting the engine.
2. What are the possible causes of OBDII code P1382?
- The code P1382 can be triggered by a faulty cylinder position sensor, damaged wiring or connectors, or a problem with the engine's timing system.
3. How can I diagnose the cause of OBDII code P1382?
- To diagnose code P1382, it is recommended to perform a visual inspection of the sensor and its wiring, test the sensor's resistance, and check the engine's timing marks.
4. Can a faulty cylinder position sensor cause OBDII code P1382?
- Yes, a faulty cylinder position sensor is a common cause of OBDII code P1382, as it fails to provide the necessary signal to the engine control module.
5. What repair tips can help resolve OBDII code P1382?
- Repair tips include replacing the faulty cylinder position sensor, repairing damaged wiring or connectors, and ensuring proper alignment of the engine's timing system.
6. Is it safe to continue driving with OBDII code P1382 active?
- It is not recommended to continue driving with OBDII code P1382 active, as it can lead to further engine damage and potential safety hazards.
7. Can OBDII code P1382 be reset without fixing the underlying issue?
- While you can clear the code temporarily, it is important to address the underlying issue causing OBDII code P1382 to prevent it from recurring.
8. How much does it typically cost to repair OBDII code P1382?
- The cost of repairing OBDII code P1382 can vary depending on the cause of the issue, but it may involve sensor replacement, wiring repairs, or timing system adjustments.
9. Will OBDII code P1382 cause my vehicle to fail an emissions test?
- Yes, OBDII code P1382 can cause your vehicle to fail an emissions test due to its impact on engine performance and emissions control systems.
10. How can I prevent OBDII code P1382 from appearing in the future?
- To prevent OBDII code P1382, it is important to perform regular maintenance on your vehicle, address any issues promptly, and follow the manufacturer's recommended service schedule.
Discuss the causes and fixes for P1382 OBDII Code
Code P1382 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.