P1380 Pontiac Code - Misfire Detected - Rough Road Data Not Available
Quick Answer
The P1380 diagnostic trouble code for Pontiac indicates that a misfire has been detected, but rough road data is not available. Common causes include Faulty ignition system components such as spark plugs, ignition coils, or wires, Clogged fuel injectors or fuel filter, Vacuum leaks in the intake system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1380 Pontiac indicates Misfire Detected - Rough Road Data Not Available.
- Common causes
- Common causes include Faulty ignition system components such as spark plugs, ignition coils, or wires, Clogged fuel injectors or fuel filter, Vacuum leaks in the intake system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1380 Pontiac Description
The P1380 diagnostic trouble code for Pontiac indicates that a misfire has been detected, but rough road data is not available. This means that the engine control module (ECM) has detected an irregular combustion event in one of the engine cylinders, which can lead to poor engine performance. The rough road data not being available refers to the fact that the ECM cannot accurately determine the severity of the misfire due to driving conditions. Misfires can cause a variety of issues in the vehicle, including reduced power, poor fuel efficiency, and potential damage to the catalytic converter over time if not addressed.
Common Causes of P1380 Pontiac
- Faulty ignition system components such as spark plugs, ignition coils, or wires
- Clogged fuel injectors or fuel filter
- Vacuum leaks in the intake system
- Low compression in the affected cylinder
- Engine timing issues
Symptoms of P1380 Pontiac
- Rough idle or rough engine performance
- Loss of power or acceleration
- Engine stalling or hesitation
- Increased fuel consumption
- Illumination of the check engine light
How to Fix P1380 Pontiac
- Use a scan tool to identify which cylinder is misfiring
- Inspect and replace any faulty ignition system components
- Clean or replace clogged fuel injectors and fuel filter
- Check for vacuum leaks and repair as necessary
- Perform a compression test to check for low compression in the cylinder
Cost to Fix P1380 Pontiac
The cost of repairing a misfire detected with rough road data not available (P1380) in a Pontiac can vary depending on the specific cause of the issue. On average, the repair costs can range from $100 to $500, including parts and labor. Keep in mind that the actual cost may be higher or lower based on the exact problem and the rates charged by the auto repair shop. It is recommended to consult with a professional mechanic for a more accurate estimate based on your vehicle and location.
Tech Notes for P1380 Pontiac
When is the Code Detected?
Need more information about the P1380 Pontiac code?
Need more information on how to fix the P1380 Pontiac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1380 Pontiac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1380 Pontiac Code
1. What does the OBDII code P1380 mean for a Pontiac?
P1380 indicates that the engine control module (ECM) detected a misfire but could not access rough road data from the vehicle's sensors to help pinpoint the issue.
2. What are the common symptoms of code P1380 in a Pontiac?
Symptoms may include an illuminated check engine light, rough idling, poor engine performance, reduced fuel efficiency, and possible engine hesitation or stalling.
3. What causes the P1380 code to appear in a Pontiac?
Common causes include a faulty crankshaft position sensor, wheel speed sensor issues, damaged wiring, a malfunctioning ECM, or problems with the ignition system.
4. Can a bad wheel speed sensor trigger code P1380?
Yes, a faulty wheel speed sensor can prevent the ECM from accessing rough road data, contributing to the P1380 code.
5. How is the P1380 code diagnosed?
A mechanic will use a scan tool to read the code, inspect the crankshaft sensor and wheel speed sensors, check the wiring and connectors, and test the ignition and fuel systems.
6. Can driving with the P1380 code damage my Pontiac?
Driving with a misfire can cause long-term damage to the engine or catalytic converter, so it’s best to address the issue promptly.
7. How do I fix the P1380 code in my Pontiac?
Repairs may involve replacing a faulty crankshaft position sensor, repairing or replacing damaged wiring, addressing wheel speed sensor issues, or updating/reprogramming the ECM.
8. How much does it cost to fix the P1380 code on a Pontiac?
Repair costs can vary but typically range from $150 to $500, depending on the root cause and labor charges.
9. Can a loose or damaged connector cause the P1380 code?
Yes, loose or corroded connectors related to the crankshaft or wheel speed sensors can trigger the code.
10. Is it safe to clear the P1380 code without repairs?
Clearing the code without addressing the underlying issue may temporarily turn off the check engine light, but the problem will likely return and could worsen over time.
Discuss the causes and fixes for P1380 Pontiac OBDII Code
Code P1380 Pontiac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.