P1359 Acura Code - Crankshaft Position / Top Dead Center Sensor Circuit Malfunction
Quick Answer
The P1359 Acura code indicates a malfunction in the crankshaft position/top dead center sensor circuit. Common causes include Faulty crankshaft position sensor, Wiring harness issues (corrosion, damage), Sensor circuit wiring short or open. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1359 Acura indicates Crankshaft Position / Top Dead Center Sensor Circuit Malfunction.
- Common causes
- Common causes include Faulty crankshaft position sensor, Wiring harness issues (corrosion, damage), Sensor circuit wiring short or open.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1359 Acura Description
The P1359 Acura code indicates a malfunction in the crankshaft position/top dead center sensor circuit. The crankshaft position sensor is a vital component in the engine management system, as it provides the engine control module (ECM) with information about the position of the crankshaft and the top dead center (TDC) position of the number one cylinder. This information is crucial for the ECM to accurately control ignition timing and fuel injection.
Common Causes of P1359 Acura
- Faulty crankshaft position sensor
- Wiring harness issues (corrosion, damage)
- Sensor circuit wiring short or open
- ECM malfunction
- Poor electrical connections
Symptoms of P1359 Acura
- Engine misfires
- Rough idling
- Difficulty starting the engine
- Reduced fuel efficiency
- Illumination of the Check Engine Light
How to Fix P1359 Acura
- Diagnose the issue by using a scan tool to retrieve the fault code and perform a visual inspection of the sensor and wiring.
- Test the crankshaft position sensor using a multimeter to check for proper resistance and voltage output.
- Inspect the wiring harness for any signs of damage, corrosion, or poor connections. Repair or replace as necessary.
- Clear the fault code from the ECM and test drive the vehicle to ensure the issue has been resolved.
- If the problem persists, consider replacing the crankshaft position sensor or consulting a professional mechanic for further diagnosis.
Cost to Fix P1359 Acura
The typical repair costs for addressing a crankshaft position/top dead center sensor circuit malfunction can range from $150 to $300, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Rates in metropolitan areas or at dealerships may be higher, while independent shops often charge less. It's recommended to check local rates for a more accurate estimate.
Need more information about the P1359 Acura code?
Need more information on how to fix the P1359 Acura code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1359 Acura code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1359 Acura Code
What does the OBDII code P1359 mean on an Acura?
P1359 indicates a malfunction in the Crankshaft Position (CKP) sensor or Top Dead Center (TDC) sensor circuit, which helps the engine control module (ECM) monitor engine position and timing.
What are the common symptoms of code P1359 in an Acura?
Symptoms can include difficulty starting the engine, rough idling, stalling, poor acceleration, reduced fuel efficiency, and an illuminated check engine light.
What causes the P1359 code to appear on an Acura?
Possible causes include a faulty crankshaft position sensor, damaged wiring or connectors, a failed TDC sensor, or issues with the engine control module (ECM).
Can I drive my Acura with the P1359 code?
Driving with the P1359 code is not recommended, as it can cause engine performance issues and potentially lead to further damage if not addressed promptly.
How do I diagnose the P1359 code in an Acura?
Diagnosis involves checking the crankshaft position sensor, TDC sensor, related wiring, and connectors for damage, as well as testing the sensors' signals and ECM functionality.
How do I fix the P1359 code on an Acura?
Common fixes include replacing the crankshaft position or TDC sensor, repairing damaged wiring or connectors, and updating or replacing the ECM if necessary.
What tools are needed to repair the P1359 code?
You may need a diagnostic scanner, multimeter, and basic hand tools to test and replace the sensors or inspect the wiring.
How much does it cost to fix the P1359 code on an Acura?
Repair costs vary but typically range from $100 to $400, depending on whether the issue involves sensor replacement, wiring repair, or ECM replacement.
Can a weak battery or alternator cause the P1359 code?
Yes, a weak battery or failing alternator can lead to voltage irregularities that may trigger sensor-related codes like P1359.
How can I prevent the P1359 code in the future?
Regular maintenance, including inspecting and replacing sensors, wiring, and connectors as needed, can help prevent the P1359 code from recurring.
Discuss the causes and fixes for P1359 Acura OBDII Code
Code P1359 Acura comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.