P1358 Mercury Code - Ignition Diagnostic Monitor Signal Out of Self-Test Range
Quick Answer
The P1358 diagnostic trouble code (DTC) for Mercury vehicles indicates that the Ignition Diagnostic Monitor Signal is out of the self-test range. Common causes include Faulty ignition coil: A malfunctioning ignition coil can cause the ignition system signal to be out of range, Defective spark plugs: Worn-out or damaged spark plugs can lead to ignition system issues and trigger the P1358 code, Wiring issues: Faulty wiring or poor connections in the ignition system can disrupt the signal and cause the code to be triggered. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1358 Mercury indicates Ignition Diagnostic Monitor Signal Out of Self-Test Range.
- Common causes
- Common causes include Faulty ignition coil: A malfunctioning ignition coil can cause the ignition system signal to be out of range, Defective spark plugs: Worn-out or damaged spark plugs can lead to ignition system issues and trigger the P1358 code, Wiring issues: Faulty wiring or poor connections in the ignition system can disrupt the signal and cause the code to be triggered.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1358 Mercury Description
The P1358 diagnostic trouble code (DTC) for Mercury vehicles indicates that the Ignition Diagnostic Monitor Signal is out of the self-test range. This code is specific to the ignition system of the vehicle and is related to the monitoring of the ignition system's performance. When this code is triggered, it means that the signal being received by the vehicle's onboard diagnostic system from the ignition system is not within the expected range during self-testing.
Common Causes of P1358 Mercury
- Faulty ignition coil: A malfunctioning ignition coil can cause the ignition system signal to be out of range.
- Defective spark plugs: Worn-out or damaged spark plugs can lead to ignition system issues and trigger the P1358 code.
- Wiring issues: Faulty wiring or poor connections in the ignition system can disrupt the signal and cause the code to be triggered.
- Faulty ignition control module: A faulty ignition control module can cause irregular signals and trigger the P1358 code.
- Engine timing issues: Incorrect engine timing can affect the ignition system's performance and lead to the code being triggered.
Symptoms of P1358 Mercury
- Rough idling: The engine may vibrate or shake excessively while idling, indicating a possible issue with the ignition system.
- Misfires: The engine may misfire, causing a noticeable loss of power and rough running.
- Decreased fuel efficiency: The vehicle may experience a decrease in fuel efficiency due to inefficient combustion caused by ignition system issues.
- Difficulty starting the engine: The vehicle may have trouble starting, requiring multiple attempts before the engine starts.
How to Fix P1358 Mercury
- Diagnose the issue: Use a diagnostic tool to read the code and pinpoint the exact cause of the problem.
- Inspect ignition components: Check the ignition coil, spark plugs, wiring, and ignition control module for any signs of damage or wear.
- Replace faulty components: Replace any faulty ignition components identified during the inspection.
- Clear the code: Once the repairs are completed, clear the diagnostic trouble code from the vehicle's onboard computer.
- Test drive: Test drive the vehicle to ensure that the issue has been resolved and that the code does not reappear.
Cost to Fix P1358 Mercury
The cost of repairing a P1358 code on a Mercury vehicle can vary depending on the specific cause of the issue and the labor rates in your area. On average, you can expect to pay anywhere from $100 to $500 for parts and labor to resolve this issue. However, it is essential to note that labor rates can vary significantly, with rates typically ranging from $80 to $150 per hour at most auto repair shops. It is advisable to check with local shops for a more accurate estimate based on your specific vehicle make and model, as well as the severity of the issue.
Need more information about the P1358 Mercury code?
Need more information on how to fix the P1358 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1358 Mercury code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1358 Mercury Code
1. What are the common symptoms of OBDII code P1358 (Mercury)?
The common symptoms of OBDII code P1358 in a Mercury vehicle include engine misfires, rough idling, hesitation or lack of power, and potential stalling.
2. What are the possible causes of OBDII code P1358 (Mercury)?
Possible causes of OBDII code P1358 in a Mercury vehicle include faulty ignition coils, issues with the ignition control module, wiring harness problems, or a malfunctioning ignition diagnostic monitor.
3. How do I diagnose OBDII code P1358 (Mercury)?
Diagnosing OBDII code P1358 typically involves using a scan tool to retrieve the trouble code, inspecting the ignition system components, checking for loose or damaged wiring, and testing the ignition control module.
4. Can I still drive my Mercury with OBDII code P1358?
It is not recommended to drive your Mercury with OBDII code P1358, as it can lead to poor engine performance, potential damage to the catalytic converter, and increased emissions.
5. How do I repair OBDII code P1358 (Mercury)?
Repairing OBDII code P1358 in a Mercury vehicle may involve replacing faulty ignition coils, repairing or replacing the ignition control module, fixing any damaged wiring, or resetting the ignition diagnostic monitor.
6. Is OBDII code P1358 (Mercury) easy to fix on my own?
Depending on your automotive repair skills and experience, fixing OBDII code P1358 in a Mercury vehicle may be manageable for DIY enthusiasts. However, it is recommended to consult a professional mechanic for accurate diagnosis and repairs.
7. What is the function of the Ignition Diagnostic Monitor in a Mercury vehicle?
The Ignition Diagnostic Monitor in a Mercury vehicle is responsible for monitoring the performance of the vehicle's ignition system, detecting faults or malfunctions, and triggering the illumination of the Check Engine Light when necessary.
8. Can a bad spark plug cause OBDII code P1358 (Mercury) to appear?
Yes, a bad spark plug can contribute to the appearance of OBDII code P1358 in a Mercury vehicle, as it can disrupt the ignition system's performance and trigger the diagnostic trouble code.
9. How much does it cost to repair OBDII code P1358 (Mercury) at a mechanic?
The cost of repairing OBDII code P1358 at a mechanic can vary depending on the specific cause of the issue, the labor rates in your area, and the cost of replacement parts. It's advisable to obtain a few quotes from different repair shops.
10. Can resetting the ECU clear OBDII code P1358 (Mercury)?
Resetting the Engine Control Unit (ECU) may temporarily clear OBDII code P1358, but if the underlying issue is not addressed and fixed, the code is likely to reappear. It's essential to diagnose and repair the root cause of the problem.
Discuss the causes and fixes for P1358 Mercury OBDII Code
Code P1358 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.