P1355 Hyundai Code - #5 MF Signal Line Open
Quick Answer
The P1355 Hyundai code indicates that there is an issue with the #5 MF (Main Fuel) signal line being open. Common causes include Damaged or corroded wiring/connectors between the fuel injector and ECM, Faulty fuel injector, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1355 Hyundai indicates #5 MF Signal Line Open.
- Common causes
- Common causes include Damaged or corroded wiring/connectors between the fuel injector and ECM, Faulty fuel injector, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1355 Hyundai Description
The P1355 Hyundai code indicates that there is an issue with the #5 MF (Main Fuel) signal line being open. This means that there is a break or interruption in the communication between the fuel injector and the engine control module (ECM). The fuel injector is responsible for delivering the right amount of fuel to the engine cylinders for combustion, and any interruption in this process can lead to performance issues.
Common Causes of P1355 Hyundai
- Damaged or corroded wiring/connectors between the fuel injector and ECM
- Faulty fuel injector
- ECM malfunction
- Poor electrical connections
- Water damage or exposure to moisture
Symptoms of P1355 Hyundai
- Rough idling
- Engine misfires
- Decreased fuel efficiency
- Stalling
- Hesitation during acceleration
How to Fix P1355 Hyundai
- Begin by performing a visual inspection of the wiring and connectors between the fuel injector and ECM to check for any visible damage or corrosion.
- Test the fuel injector using a multimeter to ensure it is functioning properly.
- Check the electrical connections for a secure fit and clean any corroded terminals.
- If necessary, replace the fuel injector or repair/replace any damaged wiring or connectors.
- Clear the diagnostic trouble codes (DTCs) and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1355 Hyundai
The typical repair costs for addressing a P1355 Hyundai code can vary depending on the specific cause of the issue. On average, the cost of parts for a fuel injector replacement can range from $150 to $350, while labor costs can range from $100 to $200. Additional costs for diagnostic testing and any other necessary repairs may also apply. It's important to consider the specific diagnosis time and labor rates at auto repair shops in your area to get a more accurate cost estimate.
Need more information about the P1355 Hyundai code?
Need more information on how to fix the P1355 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1355 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1355 Hyundai Code
1. What does the OBDII code P1355 mean on a Hyundai?
P1355 indicates an issue with the #5 MF (Misfire) signal line, specifically an open circuit or disconnection.
2. What are the common symptoms of code P1355 in a Hyundai?
Symptoms may include rough engine idle, poor acceleration, reduced fuel efficiency, and the check engine light illuminating.
3. What causes the P1355 code to appear?
This code is typically caused by a damaged or disconnected wiring harness, a faulty ignition coil, or a malfunctioning Engine Control Module (ECM).
4. Can I drive my Hyundai with a P1355 code?
Driving with this code is not recommended as it may lead to further engine damage or unsafe driving conditions due to misfires.
5. How can I diagnose the P1355 code on my Hyundai?
Inspect the wiring and connectors for the #5 cylinder ignition coil, test the ignition coil itself, and check for proper signal continuity.
6. How do I fix the P1355 code on a Hyundai?
Repairs may include reconnecting or replacing damaged wiring, replacing the faulty ignition coil, or, in rare cases, repairing or replacing the ECM.
7. How much does it cost to fix a P1355 code?
Repair costs vary, but replacing an ignition coil typically ranges from $100 to $300, while wiring repairs may cost less.
8. Can a dirty ignition coil cause the P1355 code?
While dirt or corrosion on the ignition coil connectors can contribute to poor connections, the code usually points to a more severe issue like a broken wire or faulty coil.
9. Will clearing the P1355 code fix the problem?
Clearing the code without addressing the underlying issue will only temporarily turn off the check engine light. The problem will likely return.
10. How can I prevent the P1355 code from occurring again?
Regular maintenance, such as inspecting ignition components and ensuring wiring integrity, can help prevent this issue in the future.
Discuss the causes and fixes for P1355 Hyundai OBDII Code
Code P1355 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.