P1354 GMC Code - Ignition Control Module Output High/Pulse Detected When Grounded Cylinder 4
Quick Answer
The P1354 GMC code indicates that there is a problem with the Ignition Control Module (ICM) output for cylinder 4. Common causes include Faulty Ignition Control Module (ICM), Damaged wiring or connectors in the ignition system, Malfunctioning crankshaft position sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1354 GMC indicates Ignition Control Module Output High/Pulse Detected When Grounded Cylinder 4.
- Common causes
- Common causes include Faulty Ignition Control Module (ICM), Damaged wiring or connectors in the ignition system, Malfunctioning crankshaft position sensor.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1354 GMC Description
The P1354 GMC code indicates that there is a problem with the Ignition Control Module (ICM) output for cylinder 4. The ICM is responsible for controlling the ignition timing and firing of the spark plugs in the engine. When this code is triggered, it means that the ICM is detecting a high voltage or pulse when the cylinder 4 is grounded, indicating a fault in the ignition system specifically for that cylinder.
Common Causes of P1354 GMC
- Faulty Ignition Control Module (ICM)
- Damaged wiring or connectors in the ignition system
- Malfunctioning crankshaft position sensor
- Issues with the Engine Control Module (ECM)
- Electrical interference or grounding issues
Symptoms of P1354 GMC
- Engine misfires
- Rough idling or hesitation
- Decreased fuel efficiency
- Engine stalling
- Illuminated Check Engine Light
How to Fix P1354 GMC
- Use a diagnostic scanner to retrieve the trouble codes and pinpoint the issue to cylinder 4.
- Inspect the wiring and connectors in the ignition system for any damage or corrosion.
- Test the Ignition Control Module (ICM) for proper operation and replace if necessary.
- Check the crankshaft position sensor for correct readings and replace if faulty.
- Clear the trouble codes, reset the ECM, and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P1354 GMC
The typical repair costs for addressing the P1354 GMC code can range from $200 to $500, depending on the specific cause of the issue and the cost of replacement parts. This estimate includes the cost of diagnostic time, parts, and labor. However, it's essential to note that prices can vary significantly based on the location, vehicle make and model, and the mechanic's labor rates. It's advisable to obtain quotes from multiple auto repair shops to get a more accurate estimate for the repair.
Need more information about the P1354 GMC code?
Need more information on how to fix the P1354 GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1354 GMC code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1354 GMC Code
1. What are the common symptoms of OBDII code P1354 in a GMC vehicle?
Symptoms may include rough idling, engine misfires, loss of power, and illuminated Check Engine Light.
2. What does the OBDII code P1354 indicate in a GMC vehicle?
P1354 indicates that the Ignition Control Module has detected a high voltage or pulse on the output circuit when grounded for Cylinder 4.
3. What are the possible causes of OBDII code P1354 in a GMC vehicle?
Possible causes include a faulty Ignition Control Module, wiring issues, a defective spark plug, or a problem with the ignition coil for Cylinder 4.
4. How can I diagnose the OBDII code P1354 in my GMC vehicle?
Diagnosis typically involves checking the Ignition Control Module, inspecting the wiring for any damage, testing the spark plug and ignition coil for Cylinder 4, and using a scan tool to monitor live data.
5. Can I still drive my GMC vehicle with OBDII code P1354 present?
It is not recommended to drive the vehicle with code P1354 present, as it can lead to further damage and poor engine performance. It is best to address the issue promptly.
6. How can I repair OBDII code P1354 in my GMC vehicle?
Repair may involve replacing the Ignition Control Module, repairing any damaged wiring, replacing the spark plug or ignition coil for Cylinder 4, and clearing the trouble codes.
7. Are there any DIY tips for fixing OBDII code P1354 in a GMC vehicle?
While some basic checks like inspecting wiring connections can be done DIY, it is recommended to seek professional help for accurate diagnosis and repair of this code.
8. Can a bad spark plug cause OBDII code P1354 to appear in a GMC vehicle?
Yes, a faulty spark plug for Cylinder 4 can cause misfires and trigger code P1354 due to improper ignition timing and voltage irregularities.
9. How important is it to address OBDII code P1354 promptly in a GMC vehicle?
It is crucial to address code P1354 promptly to prevent potential engine damage, improve fuel efficiency, and ensure optimal performance of the vehicle.
10. Is it necessary to reset the ECU after repairing OBDII code P1354 in a GMC vehicle?
Yes, it is recommended to clear the ECU memory using a scan tool after repairing code P1354 to ensure that the issue has been resolved and the system resets properly.
Discuss the causes and fixes for P1354 GMC OBDII Code
Code P1354 GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.