P1347 Volkswagen Code - Bank 2 Camshaft Position/Crankshaft Position Sensor Wrong Allocation
Quick Answer
The P1347 code for Volkswagen vehicles indicates a fault with the Bank 2 Camshaft Position/Crankshaft Position Sensor Allocation. Common causes include Faulty camshaft or crankshaft position sensor, Wiring or connector issues, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1347 Volkswagen indicates Bank 2 Camshaft Position/Crankshaft Position Sensor Wrong Allocation.
- Common causes
- Common causes include Faulty camshaft or crankshaft position sensor, Wiring or connector issues, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1347 Volkswagen Description
The P1347 code for Volkswagen vehicles indicates a fault with the Bank 2 Camshaft Position/Crankshaft Position Sensor Allocation. This means that the Engine Control Module (ECM) has detected that the camshaft and crankshaft positions in Bank 2 are not aligned as they should be.
Common Causes of P1347 Volkswagen
- Faulty camshaft or crankshaft position sensor
- Wiring or connector issues
- ECM malfunction
- Timing chain/belt alignment issues
- Mechanical engine problem affecting sensor readings
Symptoms of P1347 Volkswagen
- Check Engine Light illuminated
- Rough idling or engine misfires
- Decreased fuel efficiency
- Hesitation or lack of power during acceleration
- Engine stalling
How to Fix P1347 Volkswagen
- Use an OBD-II scanner to retrieve the specific fault code and confirm the issue.
- Inspect the camshaft and crankshaft position sensors, wiring, and connectors for any signs of damage or wear.
- Replace the faulty sensor(s) or repair any damaged wiring/connectors.
- Clear the fault code and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnosis may be needed to identify any underlying mechanical issues.
Cost to Fix P1347 Volkswagen
The cost of repairing a Bank 2 Camshaft Position/Crankshaft Position Sensor Wrong Allocation issue can vary depending on the specific cause of the problem. On average, the parts required for this repair can range from $50 to $200, while labor costs may be around $100 to $300. Overall, the total repair cost could fall between $150 to $500. It's important to note that labor rates and part prices can vary based on location and the specific vehicle make and model. It's recommended to consult with a qualified mechanic or repair shop for an accurate cost estimate.
Need more information about the P1347 Volkswagen code?
Need more information on how to fix the P1347 Volkswagen code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1347 Volkswagen code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1347 Volkswagen Code
1. What are the common symptoms of OBDII code P1347 in a Volkswagen?
- Common symptoms include rough idling, engine misfires, poor acceleration, and the Check Engine Light coming on.
2. What does the OBDII code P1347 indicate in a Volkswagen?
- The code indicates a problem with the Bank 2 Camshaft Position/Crankshaft Position Sensor Wrong Allocation in the engine.
3. What are the possible causes of OBDII code P1347 in a Volkswagen?
- Possible causes include a faulty camshaft position sensor, crankshaft position sensor, wiring issues, or incorrect sensor allocation.
4. How can I diagnose the issue related to OBDII code P1347 in my Volkswagen?
- Diagnosing the issue typically involves using a scan tool to read the code, checking the camshaft and crankshaft sensors, and inspecting the wiring for any damage.
5. Is it safe to drive my Volkswagen with the OBDII code P1347 present?
- It is not recommended to drive your vehicle with this code present, as it can lead to poor engine performance and potential damage if not addressed promptly.
6. Can I repair OBDII code P1347 in my Volkswagen myself?
- While some DIY enthusiasts may be able to address this issue themselves, it is recommended to seek professional help to properly diagnose and repair the problem.
7. How much does it typically cost to repair OBDII code P1347 in a Volkswagen?
- The cost of repair can vary depending on the exact cause of the issue, but it may range from $200 to $500 for parts and labor.
8. Are there any preventive measures to avoid OBDII code P1347 in my Volkswagen?
- Regular maintenance, such as timely sensor inspections and replacements, can help prevent issues leading to this code.
9. Will resetting the Check Engine Light resolve OBDII code P1347 in my Volkswagen?
- Resetting the light may temporarily turn it off, but the underlying issue causing the code will still need to be diagnosed and repaired.
10. How urgent is it to address OBDII code P1347 in my Volkswagen?
- It is important to address this code promptly to prevent further engine damage and ensure the vehicle runs smoothly.
Discuss the causes and fixes for P1347 Volkswagen OBDII Code
Code P1347 Volkswagen comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.