P133D GMC Code - Cylinder 6 Glow Plug Offset Exceeded Learning Limit
Quick Answer
The P133D GMC code indicates that the Cylinder 6 Glow Plug Offset has exceeded the learning limit. Common causes include Faulty glow plug in Cylinder 6, Wiring or connection issues in the glow plug circuit, ECM software or programming issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P133D GMC indicates Cylinder 6 Glow Plug Offset Exceeded Learning Limit.
- Common causes
- Common causes include Faulty glow plug in Cylinder 6, Wiring or connection issues in the glow plug circuit, ECM software or programming issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P133D GMC Description
The P133D GMC code indicates that the Cylinder 6 Glow Plug Offset has exceeded the learning limit. Glow plugs are essential components in diesel engines, especially during cold starts. They heat the combustion chambers to facilitate ignition in diesel engines where compression alone may not produce enough heat for ignition. Cylinder 6 refers to a specific cylinder in the engine where the glow plug is located.
Common Causes of P133D GMC
- Faulty glow plug in Cylinder 6.
- Wiring or connection issues in the glow plug circuit.
- ECM software or programming issues.
- Diesel fuel quality or contamination affecting glow plug performance.
- Engine overheating or excessive carbon deposits affecting glow plug operation.
Symptoms of P133D GMC
- Difficulty starting the engine, especially in cold weather.
- Rough idling or vibrations when the engine is running.
- Decreased fuel efficiency.
- Engine misfires or hesitation during acceleration.
- Illumination of the Check Engine Light on the dashboard.
How to Fix P133D GMC
- Diagnose the specific issue by using a scan tool to read the fault codes and perform a glow plug system test.
- Inspect the glow plug in Cylinder 6 for proper operation and replace if necessary.
- Check the wiring and connections in the glow plug circuit for any damage or corrosion and repair as needed.
- Update ECM software or reprogram if required to address any programming issues.
- Perform a thorough inspection of the engine for any other related issues that may affect glow plug performance.
Cost to Fix P133D GMC
The cost of repairing a Cylinder 6 Glow Plug Offset Exceeded Learning Limit code can vary depending on the specific cause of the issue and the labor rates in your area. On average, replacing a glow plug can cost between $50 to $150 per plug, and labor costs can range from $100 to $200. Additional costs may apply if there are wiring or connection issues that need to be addressed. It's recommended to consult with a professional mechanic to get an accurate estimate for your specific vehicle.
Tech Notes for P133D GMC
Need more information about the P133D GMC code?
Need more information on how to fix the P133D GMC code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P133D GMC code diagnosed by a professional: Find a repair shop in your area
Information for Specific GMC Models
- P133D 2014 GMC Sierra — Cylinder 6 Glow Plug Offset Exceeded Learning Limit
- P133D 2015 GMC Sierra — Cylinder 6 Glow Plug Offset Exceeded Learning Limit
- P133D 2016 GMC Sierra — Cylinder 6 Glow Plug Offset Exceeded Learning Limit
- P133D 2017 GMC Sierra — Cylinder 6 Glow Plug Offset Exceeded Learning Limit
- P133D 2018 GMC Sierra — Cylinder 6 Glow Plug Offset Exceeded Learning Limit
Frequently Asked Questions about P133D GMC Code
1. What are the common symptoms of OBDII code P133D GMC (Cylinder 6 Glow Plug Offset Exceeded Learning Limit)?
The common symptoms include rough idling, loss of power, decreased fuel efficiency, and an illuminated Check Engine Light.
2. What does the OBDII code P133D GMC indicate?
The code P133D indicates that the glow plug offset learning limit for cylinder 6 has been exceeded, which can result in performance issues in the engine.
3. What are the possible causes of OBDII code P133D GMC?
Possible causes include a faulty glow plug in cylinder 6, wiring issues, poor electrical connections, or a problem with the engine control module (ECM).
4. How can I diagnose the OBDII code P133D GMC?
Diagnosing the code involves using a diagnostic scanner to retrieve the code, checking the glow plug in cylinder 6 for proper function, inspecting the wiring and connections, and testing the ECM.
5. Can I still drive my vehicle with the OBDII code P133D GMC present?
It is not recommended to drive the vehicle with the code active, as it can lead to further damage to the engine components and potentially cause a breakdown.
6. How can I repair OBDII code P133D GMC?
To repair the code, you may need to replace the faulty glow plug in cylinder 6, repair any wiring or connection issues, or reprogram the ECM to reset the learning limit.
7. Is it safe to reset the OBDII code P133D GMC without addressing the underlying issue?
Resetting the code without addressing the root cause can temporarily turn off the Check Engine Light, but the issue will likely reoccur, leading to potential engine performance problems.
8. Can a DIY enthusiast fix the OBDII code P133D GMC at home?
Depending on your mechanical skills and tools available, you may be able to replace the glow plug or check the wiring yourself. However, more complex diagnostics and repairs may require professional assistance.
9. How much does it cost to repair OBDII code P133D GMC at a repair shop?
The cost of repair can vary depending on the exact cause of the issue and labor rates in your area. Replacing a glow plug or fixing wiring may range from $100 to $300, while ECM-related repairs can be more expensive.
10. How can I prevent OBDII code P133D GMC from occurring in the future?
Regular maintenance, such as checking and replacing glow plugs as needed, ensuring proper electrical connections, and addressing any engine performance issues promptly, can help prevent the code from reoccurring.
Discuss the causes and fixes for P133D GMC OBDII Code
Code P133D GMC comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.