P1336 Suzuki Code - 58x Crank Position Tooth Error Not Learned
Quick Answer
The P1336 Suzuki diagnostic trouble code (DTC) indicates a 58x crank position tooth error not learned. Common causes include Faulty crankshaft position sensor, Wiring issues or poor connections in the crankshaft position sensor circuit, ECM software or calibration issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 Suzuki indicates 58x Crank Position Tooth Error Not Learned.
- Common causes
- Common causes include Faulty crankshaft position sensor, Wiring issues or poor connections in the crankshaft position sensor circuit, ECM software or calibration issues.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1336 Suzuki Description
The P1336 Suzuki diagnostic trouble code (DTC) indicates a 58x crank position tooth error not learned. This code is specific to Suzuki vehicles and is related to the crankshaft position sensor. The crankshaft position sensor is responsible for monitoring the position and speed of the crankshaft, which is crucial for the engine's ignition and fuel injection systems to operate correctly.
Common Causes of P1336 Suzuki
- Faulty crankshaft position sensor
- Wiring issues or poor connections in the crankshaft position sensor circuit
- ECM software or calibration issues
- Timing belt or chain problems
- Mechanical issues with the crankshaft or camshaft
Symptoms of P1336 Suzuki
- Engine misfires
- Rough idle
- Loss of power
- Difficulty starting the engine
- Check Engine Light illuminated
How to Fix P1336 Suzuki
- Diagnose the issue by using a scan tool to retrieve the DTC and inspect the crankshaft position sensor and related wiring.
- Test the crankshaft position sensor using a multimeter to check for proper voltage and resistance.
- Check the timing belt or chain for wear or damage and replace if necessary.
- Inspect the ECM for any software updates or reprogramming that may be required.
- Clear the DTC and perform a road test to ensure the issue has been resolved.
Cost to Fix P1336 Suzuki
The typical repair costs for resolving a P1336 Suzuki code can vary depending on the specific cause of the issue. In general, replacing a faulty crankshaft position sensor can range from $100 to $300, including parts and labor. However, if additional repairs or diagnostics are needed, the total cost can increase. It's important to factor in the specific diagnosis time and labor rates at auto repair shops, which can vary based on location, vehicle make and model, and engine type. It's recommended to consult with a certified mechanic for a more precise estimate.
Need more information about the P1336 Suzuki code?
Need more information on how to fix the P1336 Suzuki code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 Suzuki code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 Suzuki Code
1. What is OBDII code P1336 Suzuki?
OBDII code P1336 Suzuki refers to the 58x Crank Position Tooth Error Not Learned.
2. What are the common symptoms of OBDII code P1336 Suzuki?
Common symptoms of P1336 include engine misfires, rough idling, and difficulty starting the vehicle.
3. What are the possible causes of OBDII code P1336 Suzuki?
The code P1336 Suzuki can be triggered by issues with the crankshaft position sensor, camshaft position sensor, wiring problems, or a faulty PCM (Powertrain Control Module).
4. How can I diagnose OBDII code P1336 Suzuki?
Diagnosing P1336 typically involves using a scan tool to read the code, checking the crankshaft and camshaft sensors for proper operation, and inspecting the wiring harness for any damage.
5. Can a faulty crankshaft position sensor cause code P1336?
Yes, a faulty crankshaft position sensor can cause code P1336 Suzuki to be triggered due to incorrect signals being sent to the PCM.
6. How serious is OBDII code P1336 Suzuki?
While the severity of the code may vary, it is important to address code P1336 promptly to prevent potential engine performance issues and further damage.
7. What are some repair tips for fixing OBDII code P1336 Suzuki?
Repair tips for P1336 may include replacing the crankshaft position sensor, camshaft position sensor, repairing any damaged wiring, or reprogramming the PCM.
8. Can I drive with OBDII code P1336 Suzuki?
It is not recommended to drive with OBDII code P1336 Suzuki, as it can lead to engine performance issues and potential breakdowns.
9. How much does it typically cost to repair OBDII code P1336 Suzuki?
The cost to repair P1336 can vary depending on the underlying issue, but it may range from $100 to $500 or more, including parts and labor.
10. How can I prevent OBDII code P1336 Suzuki from occurring again?
Regular maintenance, such as checking and replacing sensors as needed, ensuring proper wiring connections, and keeping the engine in good condition, can help prevent the recurrence of P1336 Suzuki.
Discuss the causes and fixes for P1336 Suzuki OBDII Code
Code P1336 Suzuki comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.