P1336 2010 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The P1336 diagnostic trouble code (DTC) in a 2010 Ford Fusion indicates a problem with the crankshaft position sensor or camshaft position sensor input signal. Common causes include Faulty crankshaft position sensor, Faulty camshaft position sensor, Wiring issues (e.g., damaged or corroded wires). Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2010 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty crankshaft position sensor, Faulty camshaft position sensor, Wiring issues (e.g., damaged or corroded wires).
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1336 2010 Ford Fusion Description
The P1336 diagnostic trouble code (DTC) in a 2010 Ford Fusion indicates a problem with the crankshaft position sensor or camshaft position sensor input signal. These sensors are crucial components of the engine management system, responsible for providing accurate data on the position of the crankshaft and camshaft. The Engine Control Module (ECM) uses this information to determine ignition timing, fuel injection timing, and other critical functions.
Common Causes of P1336 2010 Ford Fusion
- Faulty crankshaft position sensor
- Faulty camshaft position sensor
- Wiring issues (e.g., damaged or corroded wires)
- Connector problems
- ECM malfunction
Symptoms of P1336 2010 Ford Fusion
- Rough idling
- Engine misfires
- Stalling
- Decreased fuel efficiency
- Difficulty starting the engine
How to Fix P1336 2010 Ford Fusion
- Diagnose the issue by using a scan tool to read the DTC and check the sensor signals.
- Inspect the wiring and connectors for any damage or corrosion and repair as necessary.
- Test the crankshaft position sensor and camshaft position sensor for proper operation.
- Replace any faulty sensors or components identified during the diagnostic process.
- Clear the DTC and perform a road test to ensure the issue has been resolved.
Cost to Fix P1336 2010 Ford Fusion
The cost of repairing a P1336 code in a 2010 Ford Fusion can vary depending on the specific cause of the issue. On average, the cost of replacing a faulty sensor or addressing wiring/connectivity problems can range from $100 to $300 for parts and labor. Additional costs may apply if the ECM needs to be replaced or reprogrammed. It's important to note that labor rates at auto repair shops can vary, so it's advisable to check with local providers for a more accurate estimate.
Need more information about the P1336 2010 Ford Fusion code?
Need more information on how to fix the P1336 2010 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2010 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2010 Ford Fusion Code
1. What does the OBDII code P1336 mean on a 2010 Ford Fusion?
P1336 indicates a Crankshaft Position or Camshaft Position Sensor Input Signal Error, meaning the engine control module (ECM) is detecting an issue with the timing signal from these sensors.
2. What are the common symptoms of code P1336 in a 2010 Ford Fusion?
Common symptoms include engine misfires, rough idling, poor acceleration, reduced fuel efficiency, and difficulty starting the engine.
3. What causes the P1336 code to appear on a 2010 Ford Fusion?
The most common causes are a faulty crankshaft or camshaft position sensor, damaged wiring or connectors, timing chain issues, or a malfunctioning ECM.
4. Can a bad crankshaft position sensor trigger code P1336?
Yes, a bad crankshaft position sensor is one of the primary causes of the P1336 code, as it disrupts the timing signal needed for proper engine operation.
5. How do you diagnose a P1336 code on a 2010 Ford Fusion?
Diagnosis involves scanning for additional codes, inspecting the crankshaft and camshaft position sensors, checking the wiring and connectors for damage, and verifying proper engine timing.
6. Can driving with a P1336 code damage my 2010 Ford Fusion?
Driving with this code can lead to further engine damage or unsafe driving conditions if the engine misfires or stalls, so it’s best to address it promptly.
7. How do you fix the P1336 code on a 2010 Ford Fusion?
Repairs may include replacing the faulty crankshaft or camshaft position sensor, repairing damaged wiring, correcting timing chain issues, or reprogramming the ECM if necessary.
8. Could a loose timing chain cause the P1336 code?
Yes, a loose or stretched timing chain can cause timing signal errors, leading to the P1336 code.
9. Do I need to reprogram the ECM after fixing a P1336 code?
In some cases, reprogramming or resetting the ECM may be required after repairing the underlying issue to ensure proper communication with the sensors.
10. Is the P1336 code specific to Ford vehicles?
No, the P1336 code is a generic OBD-II code, but its specific symptoms and causes may vary slightly between manufacturers and models, including the 2010 Ford Fusion.
Discuss the causes and fixes for P1336 2010 Ford Fusion OBDII Code
Code P1336 2010 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.