P1336 2009 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The P1336 diagnostic trouble code (DTC) in a 2009 Ford Fusion indicates a Crankshaft Position or Camshaft Position Sensor Input Signal Error. Common causes include Faulty crankshaft position sensor, Faulty camshaft position sensor, Wiring or connection issues with the sensors. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2009 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty crankshaft position sensor, Faulty camshaft position sensor, Wiring or connection issues with the sensors.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1336 2009 Ford Fusion Description
The P1336 diagnostic trouble code (DTC) in a 2009 Ford Fusion indicates a Crankshaft Position or Camshaft Position Sensor Input Signal Error. This means that the signal being sent by either the crankshaft position sensor (CKP) or camshaft position sensor (CMP) to the engine control module (ECM) is not within the expected parameters. These sensors play a crucial role in the engine's operation by providing data on the position of the crankshaft and camshaft, which is used to determine ignition timing, fuel injection timing, and other critical functions.
Common Causes of P1336 2009 Ford Fusion
- Faulty crankshaft position sensor
- Faulty camshaft position sensor
- Wiring or connection issues with the sensors
- Malfunctioning engine control module (ECM)
- Timing chain/belt alignment issues
Symptoms of P1336 2009 Ford Fusion
- Engine misfires or runs rough
- Difficulty starting the engine
- Engine stalling
- Decreased fuel efficiency
- Increased emissions levels
How to Fix P1336 2009 Ford Fusion
- Use a diagnostic scan tool to confirm the presence of the P1336 code and pinpoint the exact cause of the issue.
- Inspect the wiring and connections to the crankshaft and camshaft position sensors for any damage or corrosion. Repair or replace as necessary.
- Test the sensors themselves to ensure they are functioning correctly. Replace any faulty sensors.
- Check the timing chain or belt alignment to ensure proper synchronization of the crankshaft and camshaft.
- Clear the error code from the ECM and test drive the vehicle to confirm that the issue has been resolved.
Cost to Fix P1336 2009 Ford Fusion
The typical repair costs for addressing a P1336 code in a 2009 Ford Fusion can vary depending on the exact cause of the issue. Parts such as sensors or wiring components may cost between $50 to $200, while labor costs can range from $100 to $300. Overall, the total repair cost could amount to $150 to $500. It is important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate.
Need more information about the P1336 2009 Ford Fusion code?
Need more information on how to fix the P1336 2009 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2009 Ford Fusion Code
1. What does OBDII code P1336 mean on a 2009 Ford Fusion?
P1336 indicates a Crankshaft Position or Camshaft Position Sensor Input Signal Error, meaning the engine control module (ECM) has detected an issue with the signals from these sensors.
2. What are the symptoms of code P1336 in a Ford Fusion?
Common symptoms include difficulty starting the engine, engine stalling, rough idling, reduced performance, and the Check Engine Light illuminating.
3. What causes P1336 to appear in a 2009 Ford Fusion?
Possible causes include a faulty crankshaft or camshaft position sensor, damaged wiring or connectors, a misaligned timing belt or chain, or issues with the ECM.
4. Can a bad crankshaft position sensor cause P1336 in my Ford Fusion?
Yes, a malfunctioning crankshaft position sensor is a common cause of P1336, as it disrupts the synchronization of engine timing signals.
5. How do I diagnose P1336 in my 2009 Ford Fusion?
Use an OBDII scanner to confirm the code, then inspect the crankshaft and camshaft sensors, check for damaged wiring, and verify the timing alignment of the engine.
6. Can driving with code P1336 damage my 2009 Ford Fusion?
Driving with P1336 may lead to poor engine performance, stalling, and potential damage to engine components if the timing is off for an extended period.
7. How do I fix P1336 on my 2009 Ford Fusion?
Repairs may include replacing faulty sensors, repairing or replacing damaged wiring, resetting the engine timing, or reprogramming the ECM if necessary.
8. How much does it cost to fix P1336 on a 2009 Ford Fusion?
The repair cost depends on the issue but generally ranges from $100 to $300 for sensor replacement and higher if timing or ECM repairs are needed.
9. Can a loose timing belt cause P1336 in a Ford Fusion?
Yes, a loose or misaligned timing belt or chain can cause P1336 by disrupting the synchronization of the crankshaft and camshaft signals.
10. Will clearing the code fix P1336 on my Ford Fusion?
Clearing the code may turn off the Check Engine Light temporarily, but the underlying issue must be repaired to prevent the code from returning.
Discuss the causes and fixes for P1336 2009 Ford Fusion OBDII Code
Code P1336 2009 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.