P1336 2007 Ford Fusion Code - Crankshaft Position Or Camshaft Position Sensor Input Signal Error
Quick Answer
The P1336 diagnostic trouble code (DTC) in a 2007 Ford Fusion indicates a problem with the crankshaft position or camshaft position sensor input signal. Common causes include Faulty crankshaft or camshaft position sensor, Damaged or corroded wiring/connectors, ECM malfunction. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1336 2007 Ford Fusion indicates Crankshaft Position Or Camshaft Position Sensor Input Signal Error.
- Common causes
- Common causes include Faulty crankshaft or camshaft position sensor, Damaged or corroded wiring/connectors, ECM malfunction.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1336 2007 Ford Fusion Description
The P1336 diagnostic trouble code (DTC) in a 2007 Ford Fusion indicates a problem with the crankshaft position or camshaft position sensor input signal. These sensors are crucial components of the vehicle's engine management system, as they provide vital data to the engine control module (ECM) to ensure proper ignition timing and fuel delivery.
Common Causes of P1336 2007 Ford Fusion
- Faulty crankshaft or camshaft position sensor
- Damaged or corroded wiring/connectors
- ECM malfunction
- Incorrect sensor installation
- Engine timing belt/chain issues
Symptoms of P1336 2007 Ford Fusion
- Rough idling or stalling
- Poor acceleration
- Misfires
- Difficulty starting the engine
- Check Engine Light illuminated
How to Fix P1336 2007 Ford Fusion
- Diagnose the issue by connecting a scan tool to the vehicle's onboard diagnostic system to retrieve the trouble codes and confirm the problem with the crankshaft or camshaft position sensor.
- Inspect the sensors, wiring, and connectors for any damage or corrosion. Replace any faulty components.
- Reset the ECM and clear the trouble codes to see if the issue persists.
- If the problem persists, consider replacing the crankshaft or camshaft position sensor.
- Test drive the vehicle to ensure the issue has been resolved and the Check Engine Light stays off.
Cost to Fix P1336 2007 Ford Fusion
The typical repair costs for addressing a P1336 code in a 2007 Ford Fusion can range from $100 to $300, depending on the specific cause of the issue and the cost of parts and labor. It's important to note that diagnostic time and labor rates at auto repair shops can vary, so it's advisable to check with local shops for a more accurate estimate. Keep in mind that rates may be higher at dealerships or metropolitan areas, while independent shops may offer more competitive prices.
Need more information about the P1336 2007 Ford Fusion code?
Need more information on how to fix the P1336 2007 Ford Fusion code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1336 2007 Ford Fusion code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1336 2007 Ford Fusion Code
What does the OBDII code P1336 mean on a 2007 Ford Fusion?
P1336 indicates a Crankshaft Position Sensor or Camshaft Position Sensor Input Signal Error, meaning the engine control module (ECM) is detecting an issue with the timing signals from these sensors.
What are the common symptoms of code P1336 in a 2007 Ford Fusion?
Common symptoms include engine stalling, rough idling, difficulty starting, poor fuel economy, and the check engine light being illuminated.
What causes the P1336 code to appear in a 2007 Ford Fusion?
Potential causes include a faulty crankshaft position sensor, a faulty camshaft position sensor, damaged wiring or connectors, timing chain issues, or a failing ECM.
Can a bad crankshaft position sensor alone trigger the P1336 code?
Yes, a defective or malfunctioning crankshaft position sensor can independently cause the P1336 code to appear.
How do you diagnose the P1336 code in a 2007 Ford Fusion?
Diagnosis involves using an OBDII scanner to confirm the code, inspecting the crankshaft and camshaft position sensors, checking for damaged wiring or loose connections, and verifying proper engine timing.
Can I drive my 2007 Ford Fusion with the P1336 code?
Driving with the P1336 code is not recommended, as it can lead to engine stalling or further damage due to improper timing.
How is the P1336 code fixed on a 2007 Ford Fusion?
Repairs may include replacing the faulty crankshaft or camshaft position sensor, repairing damaged wiring, resetting the ECM, or addressing timing chain issues if needed.
How much does it cost to repair the P1336 code in a 2007 Ford Fusion?
The cost depends on the specific issue, but replacing a crankshaft or camshaft position sensor typically costs $150–$350, including parts and labor.
Can a timing chain problem cause the P1336 code to appear?
Yes, a stretched or misaligned timing chain can disrupt the timing signals and trigger the P1336 code.
Will clearing the P1336 code fix the issue?
Clearing the code may turn off the check engine light temporarily, but the underlying problem will persist until properly repaired.
Discuss the causes and fixes for P1336 2007 Ford Fusion OBDII Code
Code P1336 2007 Ford Fusion comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.