P1335 Hyundai Code - #5 MF Signal Line Short
Quick Answer
The P1335 Hyundai code indicates a problem with the #5 MF signal line short within the vehicle's electrical system. Common causes include Wiring harness issues, such as frayed or damaged wires, Faulty ignition coil, Loose or corroded electrical connections. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1335 Hyundai indicates #5 MF Signal Line Short.
- Common causes
- Common causes include Wiring harness issues, such as frayed or damaged wires, Faulty ignition coil, Loose or corroded electrical connections.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1335 Hyundai Description
The P1335 Hyundai code indicates a problem with the #5 MF signal line short within the vehicle's electrical system. This code typically affects the engine performance and can lead to various issues if not addressed promptly. The #5 MF signal line is responsible for transmitting signals between different components of the engine, such as the ignition system, fuel injectors, and sensors. A short in this signal line can disrupt the communication between these components, leading to misfires, rough idling, poor fuel efficiency, and potentially even engine stalling.
Common Causes of P1335 Hyundai
- Wiring harness issues, such as frayed or damaged wires
- Faulty ignition coil
- Loose or corroded electrical connections
- Malfunctioning engine control module (ECM)
- Water or debris intrusion into the electrical system
Symptoms of P1335 Hyundai
- Engine misfires
- Rough idling or hesitation during acceleration
- Decreased fuel efficiency
- Engine stalling
- Check Engine Light illuminated
How to Fix P1335 Hyundai
- Begin by inspecting the wiring harness for any visible damage or signs of wear. Replace any damaged wires or connectors.
- Check the ignition coil for proper function and replace it if necessary.
- Verify all electrical connections are tight and free of corrosion. Clean and tighten connections as needed.
- Test the engine control module (ECM) for proper operation and replace if it is found to be faulty.
- Clear the diagnostic trouble codes from the vehicle's computer and test drive to ensure the issue has been resolved.
Cost to Fix P1335 Hyundai
The cost of repairing a #5 MF signal line short can vary depending on the specific cause of the issue and the extent of the repairs needed. On average, the parts and labor for this repair could range from $150 to $500. However, it is important to note that labor rates at auto repair shops can vary significantly, so it is advisable to obtain a few quotes from different shops to get a more accurate estimate. Additionally, the cost of parts and labor may be higher for certain vehicle makes and models or in metropolitan areas.
Need more information about the P1335 Hyundai code?
Need more information on how to fix the P1335 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1335 Hyundai code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P1335 Hyundai Code
1. What does the OBDII code P1335 mean on a Hyundai?
The P1335 code on a Hyundai indicates an issue with the #5 MF Signal Line, specifically a short circuit.
2. What are the symptoms of code P1335 in a Hyundai?
Symptoms may include rough engine performance, stalling, difficulty starting, or the check engine light illuminating.
3. What causes the P1335 code to appear on a Hyundai?
Common causes include a damaged or shorted #5 MF signal wire, a faulty engine control module (ECM), or a malfunctioning sensor related to the signal line.
4. How is code P1335 diagnosed on a Hyundai?
A technician will inspect the wiring and connectors for damage, test the #5 MF signal line for continuity, and check the ECM and related sensors.
5. Can I drive my Hyundai with the P1335 code active?
Driving with the P1335 code is not recommended, as it can lead to poor engine performance and potential damage to other components.
6. How do I fix the P1335 code on my Hyundai?
Repairs typically involve replacing or repairing damaged wiring, addressing sensor issues, or, in rare cases, replacing the ECM.
7. How much does it cost to fix the P1335 code on a Hyundai?
Repair costs vary depending on the issue but can range from $100 for simple wiring repairs to $1,000 or more if the ECM needs replacement.
8. Can a loose connector cause the P1335 code on a Hyundai?
Yes, a loose or corroded connector in the #5 MF signal line can trigger the P1335 code.
9. Will clearing the code with a scan tool fix the P1335 issue?
Clearing the code will remove it temporarily but will not resolve the underlying problem causing the short.
10. Is the P1335 code specific to Hyundai vehicles?
The P1335 code is commonly associated with Hyundai models but may also appear on other makes with similar diagnostic setups, though the fault specifics may differ.
Discuss the causes and fixes for P1335 Hyundai OBDII Code
Code P1335 Hyundai comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.