Engine-Codes.com
Engine-Codes – Audi – P1335 Audi

P1335 Audi Code - Engine Torque Control 2 Adaption At Limit

Quick Answer

The P1335 Audi code indicates that there is an issue with Engine Torque Control 2 Adaption being at its limit. Common causes include Faulty engine control module, Malfunctioning sensors (such as throttle position sensor or oxygen sensor), Wiring issues. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1335 Audi indicates Engine Torque Control 2 Adaption At Limit.
Common causes
Common causes include Faulty engine control module, Malfunctioning sensors (such as throttle position sensor or oxygen sensor), Wiring issues.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
What is this?
Table of contents Created and updated by William Orellana on Sep 08, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1335 Audi Description

The P1335 Audi code indicates that there is an issue with Engine Torque Control 2 Adaption being at its limit. In simpler terms, this means that the engine is not able to adjust the torque output properly, which can lead to a variety of performance issues. Engine torque control is crucial for maintaining proper power delivery and fuel efficiency in modern vehicles. When the adaption of engine torque control reaches its limit, it can result in rough idling, poor acceleration, decreased fuel efficiency, and potential stalling.

OBDII Code P1335 Audi - Engine Torque Control 2 Adaption At Limit
P1335 Audi Code - Engine Torque Control 2 Adaption At Limit

Common Causes of P1335 Audi

  1. Faulty engine control module
  2. Malfunctioning sensors (such as throttle position sensor or oxygen sensor)
  3. Wiring issues
  4. Vacuum leaks
  5. Dirty or clogged fuel injectors

Symptoms of P1335 Audi

  1. Rough idling
  2. Decreased acceleration
  3. Reduced fuel efficiency
  4. Engine stalling
  5. Check Engine Light illuminated

How to Fix P1335 Audi

  1. Diagnose the specific cause of the issue by using a diagnostic scanner to read the fault codes and perform further testing if needed.
  2. Inspect and test the engine control module, sensors, and wiring for any faults or damages.
  3. Address any identified issues by repairing or replacing faulty components.
  4. Clear the fault codes and reset the engine control module.
  5. Test drive the vehicle to ensure that the issue has been resolved and the Engine Torque Control 2 Adaption is functioning properly.

Cost to Fix P1335 Audi

The cost of repairing the P1335 Audi code can vary depending on the specific cause of the issue and the labor rates at the auto repair shop. On average, repairing this issue can cost anywhere from $200 to $500, including parts and labor. It's important to note that diagnostic time and labor rates can vary, so it's recommended to get a specific estimate from a trusted mechanic in your area.

Need more information about the P1335 Audi code?

Need more information on how to fix the P1335 Audi code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1335 Audi code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1335 Audi Code

1. What does the OBDII code P1335 mean on an Audi?

P1335 on an Audi indicates "Engine Torque Control 2 Adaptation At Limit," meaning the engine control module (ECM) has detected issues with torque management.

2. What are the common symptoms of the P1335 code in an Audi?

Symptoms may include reduced engine performance, the check engine light turning on, poor acceleration, or erratic shifting in automatic transmissions.

3. What causes the P1335 code to appear on an Audi?

Possible causes include faulty throttle position sensors, issues with the ECM software, a malfunctioning torque management system, or wiring/connection problems.

4. Is it safe to drive with the P1335 code active?

Driving with the P1335 code can lead to reduced engine performance and potential damage over time. It's best to address the issue promptly.

5. How do you diagnose the P1335 code on an Audi?

Diagnosis involves scanning for additional codes, inspecting throttle sensors, testing the wiring and connections, and checking ECM adaptation values.

6. Can a dirty throttle body cause the P1335 code?

Yes, a dirty or malfunctioning throttle body can interfere with torque management and trigger the P1335 code.

7. How is the P1335 code typically fixed on an Audi?

Repairs may include cleaning or replacing the throttle body, updating ECM software, repairing wiring issues, or recalibrating the torque control system.

8. Does the P1335 code require ECM replacement?

ECM replacement is rarely needed and should only be considered after thoroughly diagnosing all related components and software.

9. Can a faulty accelerator pedal position sensor cause the P1335 code?

Yes, a faulty accelerator pedal position sensor can disrupt torque control and trigger the P1335 code.

10. How much does it cost to fix the P1335 code on an Audi?

Repair costs vary depending on the cause but typically range from $150 to $500, including diagnostics, cleaning, or replacing components.

Discuss the causes and fixes for P1335 Audi OBDII Code

Submit a New Comment

Code P1335 Audi comments

No comments found for this page.