P1323 BUICK - 24X Reference Circuit Low Frequency

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What does this mean?

P1323 BUICK Possible Causes

  • Faulty 24X CKP sensor
  • 24X CKP sensor harness is open or shorted
  • 24X CKP sensor circuit poor electrical connection

How do I fix code P1323 BUICK

    Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1323 BUICK code

    Labor: 1.0

    The cost of diagnosing the P1323 BUICK code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the P1323 BUICK code detected?

No 24X reference pulses received by the Powertrain Control Module (PCM) and the line is low for 4 seconds.

P1323 BUICK Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1323 BUICK Meaning

The Ignition Control Module creates a 4X signal and a 24X signal that is used by the PCM for ignition and fuel control. In this diagnostic test, the PCM checks for 4X reference pulses being received without 24X reference pulses. When the engine is running and the PCM is receiving 4X reference pulses without 24X reference pulses and the 24X reference signal line is low for 4 seconds, DTC P1323 is set.
OBDII Code P1323 BUICK - 24X Reference Circuit Low Frequency - Engine-Codes.com

P1323 BUICK More Information

Need more information on how to fix the P1323 BUICK code?
Get Access to Factory Service Manuals

Related Information