P130F 2015 GMC Sierra Code - Ignition On/Start Voltage Signal Message Counter Incorrect
Quick Answer
The diagnostic trouble code P130F for a 2015 GMC Sierra indicates that the Ignition On/Start Voltage Signal Message Counter is incorrect. Common causes include Faulty ignition coils, Worn-out spark plugs, Wiring issues in the ignition system. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P130F 2015 GMC Sierra indicates Ignition On/Start Voltage Signal Message Counter Incorrect.
- Common causes
- Common causes include Faulty ignition coils, Worn-out spark plugs, Wiring issues in the ignition system.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P130F 2015 GMC Sierra Description
The diagnostic trouble code P130F for a 2015 GMC Sierra indicates that the Ignition On/Start Voltage Signal Message Counter is incorrect. This code is typically related to the vehicle's ignition system and can have various implications for the vehicle's performance. The ignition system is responsible for starting the engine by providing the necessary spark to ignite the air-fuel mixture in the combustion chambers. When the voltage signal message counter is incorrect, it means that there is a discrepancy in the communication between the ignition system components, which can lead to issues with starting the engine, misfires, and overall poor performance.
Common Causes of P130F 2015 GMC Sierra
- Faulty ignition coils
- Worn-out spark plugs
- Wiring issues in the ignition system
- Malfunctioning ignition control module
- Poor electrical connections
Symptoms of P130F 2015 GMC Sierra
- Difficulty starting the engine
- Engine misfires
- Rough idling or stalling
- Reduced fuel efficiency
- Illumination of the check engine light
How to Fix P130F 2015 GMC Sierra
- Diagnose the issue using a diagnostic scanner to retrieve the trouble codes and pinpoint the exact cause of the problem.
- Inspect the ignition coils, spark plugs, and wiring for any signs of damage or wear.
- Test the ignition control module for proper functioning and replace if necessary.
- Repair or replace any faulty components in the ignition system.
- Clear the trouble codes and test drive the vehicle to ensure the issue has been resolved.
Cost to Fix P130F 2015 GMC Sierra
The typical repair costs for addressing the P130F code on a 2015 GMC Sierra can vary depending on the specific cause of the issue. In general, the cost of parts such as ignition coils, spark plugs, or an ignition control module can range from $100 to $500. Labor costs at auto repair shops typically range from $80 to $150 per hour. Therefore, the total repair cost for this issue could range from $200 to $800 or more, depending on the extent of the repairs needed. It is advisable to consult with a professional mechanic to get an accurate estimate based on the specific diagnosis and repair required for your vehicle.
Need more information about the P130F 2015 GMC Sierra code?
Need more information on how to fix the P130F 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P130F 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P130F 2015 GMC Sierra Code
What does the OBDII code P130F mean on a 2015 GMC Sierra?
P130F indicates that the Engine Control Module (ECM) has detected an issue with the ignition on/start voltage signal message counter, which may point to communication or voltage irregularities.
What are the common symptoms of code P130F in a 2015 GMC Sierra?
Symptoms may include difficulty starting the engine, stalling, reduced engine performance, and the illumination of the check engine light.
What causes the P130F code to appear in a 2015 GMC Sierra?
Common causes include a weak or faulty battery, poor electrical connections, damaged wiring, or a malfunctioning ECM or Body Control Module (BCM).
Can a low battery cause the P130F code in a 2015 GMC Sierra?
Yes, a weak or failing battery is a common cause and can result in voltage irregularities that trigger the code.
How do you diagnose the P130F code on a 2015 GMC Sierra?
Diagnosis involves checking the battery and alternator voltage, inspecting wiring and connectors for damage or corrosion, and using a scan tool to monitor communication between the ECM and BCM.
Can you drive a 2015 GMC Sierra with code P130F?
Driving with this code is not recommended, as it may lead to engine performance issues or starting problems that could leave you stranded.
How is the P130F code fixed on a 2015 GMC Sierra?
Repairs may include replacing a weak battery, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM or BCM if necessary.
Could a faulty alternator cause the P130F code on a 2015 GMC Sierra?
Yes, a failing alternator can cause voltage irregularities, which may trigger the P130F code.
Does the P130F code require ECM or BCM replacement?
Not always. ECM or BCM replacement is only necessary if they are confirmed to be faulty after diagnosing other potential causes like battery or wiring issues.
How much does it cost to fix code P130F on a 2015 GMC Sierra?
Repair costs vary depending on the root cause but may range from $100 for a battery replacement to $1,000 or more for ECM or BCM replacement and reprogramming.
Discuss the causes and fixes for P130F 2015 GMC Sierra OBDII Code
Code P130F 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.