P1307 Code - Accelerator Sensor Range/Performance
Quick Answer
The P1307 code indicates an issue with the accelerator sensor's range or performance. Common causes include Faulty accelerator sensor, Wiring or connector issues, Dirty or clogged throttle body. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P1307 indicates Accelerator Sensor Range/Performance.
- Common causes
- Common causes include Faulty accelerator sensor, Wiring or connector issues, Dirty or clogged throttle body.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P1307 Description
The P1307 code indicates an issue with the accelerator sensor's range or performance. The accelerator sensor, also known as the throttle position sensor, is responsible for monitoring the position of the throttle pedal and sending this information to the engine control module (ECM). This data is crucial for the ECM to adjust fuel delivery and ignition timing, ultimately controlling the engine's performance. When the accelerator sensor's range or performance is out of specification, it can lead to drivability issues and potentially affect the vehicle's overall performance.
Common Causes of P1307
- Faulty accelerator sensor
- Wiring or connector issues
- Dirty or clogged throttle body
- ECM software or hardware problems
- Vacuum leaks in the intake system
Symptoms of P1307
- Engine hesitation or stalling
- Reduced engine power or acceleration
- Rough idling
- Poor fuel economy
- Illumination of the check engine light
How to Fix P1307
- Diagnose the issue using a scan tool to verify the P1307 code and perform a visual inspection of the accelerator sensor and related components.
- Test the accelerator sensor's voltage and resistance to determine if it is functioning correctly.
- Clean the throttle body and inspect the wiring and connectors for any damage or corrosion.
- If the accelerator sensor is faulty, replace it with a new sensor following manufacturer guidelines.
- Clear the fault codes, reset the ECM, and perform a test drive to ensure the issue has been resolved.
Cost to Fix P1307
The cost of repairing an accelerator sensor range/performance issue can vary depending on the specific cause of the problem and the labor rates at the auto repair shop. On average, the repair cost for this issue can range from $100 to $300 for parts and labor. It's important to note that additional diagnostic time may be needed to pinpoint the exact cause of the problem, which could increase the overall repair cost. It's recommended to get a detailed quote from a qualified mechanic to determine the precise cost for your vehicle.
Need more information about the P1307 code?
Need more information on how to fix the P1307 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P1307 code diagnosed by a professional: Find a repair shop in your area
Code P1307 Information for Specific Makes
- P1307 Ford — Kickdown Relay Hold Circuit Fault
- P1307 Hyundai — Accelerator Sensor Range/Performance
- P1307 KIA — Accelerator Sensor Range/Performance
Frequently Asked Questions about P1307 Code
1. What does the OBDII code P1307 mean?
P1307 indicates a problem with the accelerator pedal position sensor, specifically a range or performance issue where the sensor's signal is outside the expected parameters.
2. What are the common symptoms of a P1307 code?
Symptoms may include poor acceleration, reduced engine performance, an illuminated check engine light, and, in some cases, the engine entering limp mode.
3. What causes the P1307 code to appear?
Possible causes include a faulty accelerator pedal position sensor, wiring issues such as damaged or corroded connectors, or an issue with the engine control module (ECM).
4. How can I diagnose the P1307 code?
Start by scanning for additional codes, inspecting the accelerator pedal position sensor and its wiring for damage, and using a multimeter to check for proper voltage and continuity.
5. Can I continue driving with a P1307 code?
Driving with a P1307 code is not recommended, as it may lead to reduced performance or unsafe acceleration issues. Address the problem as soon as possible.
6. How do I fix the P1307 code?
Repairs may include replacing the accelerator pedal position sensor, repairing or replacing damaged wiring or connectors, or reprogramming or replacing the ECM if necessary.
7. How much does it cost to repair a P1307 code?
The cost depends on the cause, but replacing the accelerator pedal position sensor typically ranges from $100 to $300, including parts and labor.
8. Can a dirty throttle body cause a P1307 code?
While a dirty throttle body is not a direct cause, it can contribute to performance issues that might be misinterpreted as sensor problems. Cleaning the throttle body may help.
9. How do I reset the P1307 code after repairs?
Use an OBDII scanner to clear the code after completing repairs. If the issue is resolved, the code should not return.
10. Is the P1307 code manufacturer-specific?
Yes, P1307 is often a manufacturer-specific code. Its exact meaning and diagnostic steps may vary depending on the vehicle make and model.
Discuss the causes and fixes for P1307 OBDII Code
Code P1307 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.