Engine-Codes - Toyota - P1305 TOYOTA

P1305 TOYOTA - Igniter Circuit Malfunction No. 2

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3  What is this?

P1305 TOYOTA Possible Causes

  • Faulty Ignition Coil No. 2
  • Ignition Coil No. 2 harness is open or shorted
  • Ignition Coil No. 2 circuit poor electrical connection
  • Faulty Engine Control Module (ECM)

How do I fix code P1305 TOYOTA

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the P1305 TOYOTA code

Labor: 1.0

The cost of diagnosing the P1305 TOYOTA code is 1.0 hour of labor. The auto repair labor rates vary widely across the country, and even within the same city. Most auto repairs shops charge between $75 and $150 per hour.

When is the code detected?

The P1305 code is for the ignition coil No.2 and is set when there is no IGF signal to the ECM during engine operation.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

P1305 TOYOTA Meaning

Direct Ignition System (DIS) is a 1-cylinder ignition system that ignites one cylinder with one ignition coil. Ignitor is integral to ignition coil. The Engine Control Module (ECM) determines ignition timing and outputs a ignition signal (IGT) for each cylinder. Based on the IGT signals, power transistors in the ignitor cut of current to primary coil in ignition coil, causing ignition coil to fire spark plug. After delivering a command to turn off primary circuit on the IGT wire, ECM monitors IGF circuit to ensure primary switching occurred.

P1305 TOYOTA More Information

Need more information on how to fix the P1305 TOYOTA code?
Get Access to Factory Service Manuals

Information for specific Toyota models

Need more help?

Get the P1305 Toyota code diagnosed by a professional: Find a repair shop in your area