P129D 2014 GMC Sierra Code - Fuel Pump Driver Control Module Ignition On/Start Switch Circuit Low Voltage
Quick Answer
The P129D diagnostic trouble code for a 2014 GMC Sierra indicates a problem with the Fuel Pump Driver Control Module Ignition On/Start Switch Circuit having low voltage. Common causes include Faulty Fuel Pump Driver Control Module, Wiring or connection issues in the ignition on/start switch circuit, Low battery voltage affecting the circuit. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P129D 2014 GMC Sierra indicates Fuel Pump Driver Control Module Ignition On/Start Switch Circuit Low Voltage.
- Common causes
- Common causes include Faulty Fuel Pump Driver Control Module, Wiring or connection issues in the ignition on/start switch circuit, Low battery voltage affecting the circuit.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P129D 2014 GMC Sierra Description
The P129D diagnostic trouble code for a 2014 GMC Sierra indicates a problem with the Fuel Pump Driver Control Module Ignition On/Start Switch Circuit having low voltage. This component is responsible for controlling the fuel pump operation based on input from the ignition switch during engine start-up. If the voltage is below the specified threshold, it can lead to issues with fuel delivery, affecting the engine's performance and potentially causing stalling or rough idling. This can also trigger the check engine light to illuminate on the dashboard.
Common Causes of P129D 2014 GMC Sierra
- Faulty Fuel Pump Driver Control Module
- Wiring or connection issues in the ignition on/start switch circuit
- Low battery voltage affecting the circuit
- Corrosion or damage to electrical connections
- Software or programming issues with the control module
Symptoms of P129D 2014 GMC Sierra
- Engine stalling or rough idling
- Difficulty starting the engine
- Reduced fuel efficiency
- Check engine light illuminated
- Loss of power while driving
How to Fix P129D 2014 GMC Sierra
- Diagnose the specific cause of the low voltage issue using a diagnostic scanner
- Inspect wiring and connections for any damage or corrosion, repairing or replacing as necessary
- Test the battery voltage and charging system to ensure proper electrical supply
- Replace the Fuel Pump Driver Control Module if found to be faulty
- Clear the trouble code and perform a test drive to confirm the repair
Cost to Fix P129D 2014 GMC Sierra
The typical repair costs for addressing a P129D code in a 2014 GMC Sierra can range from $200 to $500, including parts and labor. However, this estimate can vary based on the specific cause of the issue, the cost of replacement parts, and the labor rates at the auto repair shop. It's recommended to consult with a professional mechanic for a more accurate cost assessment based on the vehicle's condition and any additional repairs that may be needed.
Need more information about the P129D 2014 GMC Sierra code?
Need more information on how to fix the P129D 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P129D 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P129D 2014 GMC Sierra Code
What does the OBDII code P129D mean on a 2014 GMC Sierra?
The P129D code indicates a low voltage issue in the Fuel Pump Driver Control Module Ignition On/Start Switch Circuit.
What are the common symptoms of a P129D code?
Symptoms may include difficulty starting the engine, reduced engine performance, or the engine not starting at all.
What causes the P129D code to appear?
Common causes include a faulty Fuel Pump Driver Control Module (FPCM), damaged wiring or connectors, a weak battery, or a faulty ignition switch.
Can a bad battery trigger the P129D code?
Yes, a weak or failing battery can cause insufficient voltage, which may lead to the P129D code.
How do I diagnose the P129D code?
Start by checking the battery voltage, inspecting the wiring and connectors for damage, and testing the Fuel Pump Driver Control Module.
Is the P129D code serious?
Yes, it can prevent the engine from starting or running properly, so it should be addressed promptly to ensure reliable vehicle operation.
Can I drive my 2014 GMC Sierra with a P129D code?
Driving with this code is not recommended as it can lead to starting issues or engine failure while driving.
How is the P129D code fixed?
Repairs may include replacing the Fuel Pump Driver Control Module, repairing damaged wiring or connectors, or addressing battery or ignition switch issues.
What tools are needed to fix the P129D code?
Basic tools include a multimeter for testing voltage, a diagnostic scanner for clearing codes, and potentially replacement parts like the FPCM or wiring.
Does the P129D code require professional repair?
If you’re not experienced with electrical diagnostics, it’s best to consult a professional mechanic to accurately diagnose and repair the issue.
Discuss the causes and fixes for P129D 2014 GMC Sierra OBDII Code
Code P129D 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.