P1299 LINCOLN - Cylinder Head Temperature Sensor Detected Engine Overheating Condition
P1299 LINCOLN Possible Causes
- Low engine coolant
- Faulty Thermostat
- Faulty Cylinder Head Temperature (CHT) Sensor
- Cylinder Head Temperature Sensor harness is open or shorted
- Cylinder Head Temperature Sensor circuit poor electrical connection
How is the P1299 LINCOLN code repair?Start by checking the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
User Submitted Video
What is the cost to diagnose the P1299 LINCOLN code
Labor: 1.0The cost to diagnose the P1299 LINCOLN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.
How much do you know about cars?
Take the AutoCodes.com automotive tests and turbo-charge your car repair knowledge
- Engine Light ON (or Service Engine Soon Warning Light)
P1299 LINCOLN MeaningThe Cylinder Head Temperature (CHT) Sensor is a thermistor device in which resistance changes with temperature. The electrical resistance of a thermistor decreases as temperature increases, and the resistance increases as the temperature decreases. The varying resistance affects the voltage drop across the sensor terminals and provides electrical signals to the Powertrain Control Module (PCM) corresponding to temperature.
The CHT sensor is installed in the aluminum cylinder head and measures the metal temperature. The CHT sensor can provide complete engine temperature information and can be used to infer coolant temperature. If the CHT sensor conveys an overheating condition to the PCM, the PCM initiates a fail-safe cooling strategy based on information from the CHT sensor. A cooling system concern such as low coolant or coolant loss could cause an overheating condition. As a result, damage to major engine components could occur. Using both the CHT sensor and fail-safe cooling strategy, the PCM prevents damage by allowing air cooling of the engine and limp home capability.
The Diagnostic Trouble Code (DTC) indicates an engine overheat condition was detected by the Cylinder Head Temperature Sensor. A Failure Mode Effects Management (FMEM) strategy called fail-safe cooling was activated to cool the engine.
More InformationNeed more information on how to fix the P1299 LINCOLN code?
Get Access to Factory Service Manuals