P128F 2016 GMC Sierra Code - Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter Incorrect
Quick Answer
The diagnostic trouble code P128F for a 2016 GMC Sierra indicates that there is an issue with the Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter being incorrect. Common causes include Faulty fuel rail pressure sensors, Wiring or connector issues, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P128F 2016 GMC Sierra indicates Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter Incorrect.
- Common causes
- Common causes include Faulty fuel rail pressure sensors, Wiring or connector issues, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P128F 2016 GMC Sierra Description
The diagnostic trouble code P128F for a 2016 GMC Sierra indicates that there is an issue with the Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter being incorrect. This code typically points to a problem with the signals being sent by the fuel rail pressure sensors not matching the expected values. The fuel rail pressure sensors are crucial components in the fuel system of the vehicle, as they monitor the pressure of the fuel in the fuel rail and send this information to the engine control module (ECM). The ECM uses this data to adjust the fuel delivery to the engine for optimal performance and efficiency.
Common Causes of P128F 2016 GMC Sierra
- Faulty fuel rail pressure sensors
- Wiring or connector issues
- Malfunctioning ECM
- Fuel system problems
- Contaminated fuel
Symptoms of P128F 2016 GMC Sierra
- Decreased fuel efficiency
- Rough idling or engine stalling
- Engine hesitation during acceleration
- Check Engine Light illuminated
- Engine misfires
How to Fix P128F 2016 GMC Sierra
- Diagnose the issue using a scan tool to verify the P128F code and check the fuel rail pressure sensor signals.
- Inspect the wiring and connectors for any damage or corrosion, repairing or replacing as needed.
- Test the fuel rail pressure sensors for proper operation and replace if faulty.
- Clear the trouble code from the ECM and perform a test drive to ensure the issue is resolved.
- If the problem persists, further diagnosis may be needed to identify any underlying issues with the fuel system or ECM.
Cost to Fix P128F 2016 GMC Sierra
The typical repair costs for addressing the P128F code on a 2016 GMC Sierra can range from $200 to $500, including parts and labor. However, it's important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops. For a more accurate estimate, it's recommended to inquire about local rates before proceeding with the repair.
Need more information about the P128F 2016 GMC Sierra code?
Need more information on how to fix the P128F 2016 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P128F 2016 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P128F 2016 GMC Sierra Code
1. What does the OBDII code P128F mean on a 2016 GMC Sierra?
P128F indicates that the Fuel Rail Pressure Sensors 1 and 2 have signals with an incorrect message counter or mismatch, which can disrupt fuel system performance.
2. What are the common symptoms of code P128F in a 2016 GMC Sierra?
Symptoms may include reduced engine performance, poor fuel efficiency, rough idling, difficulty starting, and the illumination of the check engine light.
3. What causes the P128F code to appear on a 2016 GMC Sierra?
Common causes include faulty fuel rail pressure sensors, wiring or connection issues, a malfunctioning ECM (Engine Control Module), or a software glitch.
4. Can a dirty fuel system trigger the P128F code?
While not a direct cause, a dirty fuel system can lead to pressure irregularities that may exacerbate sensor signal issues.
5. How do you diagnose the P128F code in a 2016 GMC Sierra?
Diagnosis typically involves scanning the system with an OBDII scanner, inspecting the fuel rail pressure sensors and their wiring, and testing the ECM for proper communication.
6. Can I drive my 2016 GMC Sierra with the P128F code active?
Driving is possible but not recommended, as it may lead to further performance issues or potential damage to the fuel system.
7. How do you fix the P128F code in a 2016 GMC Sierra?
Repairs may involve replacing faulty fuel rail pressure sensors, repairing damaged wiring, updating ECM software, or replacing the ECM if necessary.
8. Are software updates a common fix for the P128F code?
Yes, in some cases, manufacturers release ECM software updates to address communication problems related to fuel rail pressure sensors.
9. How much does it cost to repair the P128F code on a 2016 GMC Sierra?
Repair costs can range from $150 to $500, depending on whether the issue lies with the sensors, wiring, or ECM.
10. Can a failing ECM cause the P128F code?
Yes, a failing ECM can misinterpret sensor signals or fail to process them correctly, leading to this code.
Discuss the causes and fixes for P128F 2016 GMC Sierra OBDII Code
Code P128F 2016 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.