P128F 2015 Chevrolet Silverado Code - Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter Incorrect
Quick Answer
The P128F diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado indicates that there is an issue with the Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter being incorrect. Common causes include Faulty fuel rail pressure sensors, Wiring or connector issues, Malfunctioning ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P128F 2015 Chevrolet Silverado indicates Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter Incorrect.
- Common causes
- Common causes include Faulty fuel rail pressure sensors, Wiring or connector issues, Malfunctioning ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P128F 2015 Chevrolet Silverado Description
The P128F diagnostic trouble code (DTC) for a 2015 Chevrolet Silverado indicates that there is an issue with the Fuel Rail Pressure Sensors 1 and 2 Signals Message Counter being incorrect. In simpler terms, this means that the signals being sent by the fuel rail pressure sensors are not matching the expected values or are not being received properly by the engine control module (ECM).
Common Causes of P128F 2015 Chevrolet Silverado
- Faulty fuel rail pressure sensors
- Wiring or connector issues
- Malfunctioning ECM
- Fuel system problems such as clogged fuel filters or a failing fuel pump
Symptoms of P128F 2015 Chevrolet Silverado
- Decreased fuel efficiency
- Rough idling or engine stalling
- Hesitation or lack of power during acceleration
- Engine misfires
- Check Engine Light illuminated on the dashboard
How to Fix P128F 2015 Chevrolet Silverado
- Use a diagnostic scanner to retrieve the trouble codes and identify the specific issue with the fuel rail pressure sensors.
- Inspect the wiring and connectors for any damage or corrosion, and repair or replace as necessary.
- Test the fuel rail pressure sensors using a multimeter to check for proper resistance and voltage readings.
- If the sensors are faulty, replace them with new ones and ensure they are properly calibrated.
- Clear the DTCs from the ECM's memory and test drive the vehicle to verify that the issue has been resolved.
Cost to Fix P128F 2015 Chevrolet Silverado
The typical repair costs for addressing a P128F code on a 2015 Chevrolet Silverado can vary depending on the specific cause of the issue. In general, the cost of replacing fuel rail pressure sensors can range from $150 to $300 per sensor, not including labor costs. Labor rates at auto repair shops can vary, but it is advisable to budget for around 1-2 hours of labor for this type of repair. Overall, the total repair cost could range from $300 to $600, including parts and labor. It's recommended to consult with a qualified mechanic or dealership for a more accurate estimate based on your location and vehicle specifics.
Need more information about the P128F 2015 Chevrolet Silverado code?
Need more information on how to fix the P128F 2015 Chevrolet Silverado code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P128F 2015 Chevrolet Silverado code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P128F 2015 Chevrolet Silverado Code
1. What does the OBDII code P128F mean for a 2015 Chevrolet Silverado?
P128F indicates an issue with the fuel rail pressure sensors 1 and 2, specifically a mismatch or incorrect signal message counter between the two sensors.
2. What are the common symptoms of the P128F code on a 2015 Chevrolet Silverado?
Symptoms may include poor engine performance, reduced fuel efficiency, difficulty starting, or the vehicle entering limp mode. The check engine light will also be illuminated.
3. What causes the P128F code to appear in a 2015 Chevrolet Silverado?
Common causes include faulty fuel rail pressure sensors, wiring or connector issues, a malfunctioning engine control module (ECM), or software-related problems.
4. Can a bad fuel pump cause the P128F code on a 2015 Silverado?
While it’s less likely, a failing fuel pump could indirectly contribute to issues with fuel pressure readings, but the primary cause is usually related to the sensors or their signals.
5. How do I diagnose the P128F code on my 2015 Chevrolet Silverado?
Start by scanning for additional codes, inspecting the wiring and connectors for damage, and testing the functionality of both fuel rail pressure sensors. Check for ECM updates as well.
6. Can I drive my 2015 Chevrolet Silverado with the P128F code?
It’s possible to drive short distances, but it’s not recommended as the issue can lead to poor engine performance and potentially more severe damage if left unresolved.
7. How do I fix the P128F code on a 2015 Chevrolet Silverado?
Repairs may involve replacing one or both fuel rail pressure sensors, repairing damaged wiring, or reprogramming/updating the ECM.
8. How much does it cost to repair the P128F code on a 2015 Chevrolet Silverado?
Repair costs vary depending on the issue. Replacing a single fuel rail pressure sensor typically costs $150-$300, while ECM reprogramming may cost $100-$200 at a dealer.
9. What tools are needed to troubleshoot the P128F code?
A diagnostic scan tool capable of reading live fuel rail pressure data, a multimeter for testing wiring, and possibly software for ECM updates are essential.
10. Can a P128F code clear itself on a 2015 Chevrolet Silverado?
The code may clear temporarily if the issue is intermittent, but the underlying problem will likely return unless properly diagnosed and repaired.
Discuss the causes and fixes for P128F 2015 Chevrolet Silverado OBDII Code
Code P128F 2015 Chevrolet Silverado comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.