P128D 2018 GMC Sierra Code - Fuel Rail Temperature Sensor 2 Signal Message Counter Incorrect
Quick Answer
The P128D diagnostic trouble code (DTC) for the 2018 GMC Sierra specifically refers to the Fuel Rail Temperature Sensor 2 Signal Message Counter Incorrect. Common causes include Malfunctioning fuel rail temperature sensor 2, Wiring issues or electrical connections related to the sensor, Faulty ECM. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- P128D 2018 GMC Sierra indicates Fuel Rail Temperature Sensor 2 Signal Message Counter Incorrect.
- Common causes
- Common causes include Malfunctioning fuel rail temperature sensor 2, Wiring issues or electrical connections related to the sensor, Faulty ECM.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
Code P128D 2018 GMC Sierra Description
The P128D diagnostic trouble code (DTC) for the 2018 GMC Sierra specifically refers to the Fuel Rail Temperature Sensor 2 Signal Message Counter Incorrect. This code indicates that the Engine Control Module (ECM) has detected a discrepancy in the signal message counter from the fuel rail temperature sensor 2. The fuel rail temperature sensor is a crucial component that measures the temperature of the fuel in the fuel rail. This information is essential for the ECM to accurately calculate fuel delivery and combustion timing.
Common Causes of P128D 2018 GMC Sierra
- Malfunctioning fuel rail temperature sensor 2
- Wiring issues or electrical connections related to the sensor
- Faulty ECM
- Corrosion or damage to sensor connectors
- Environmental factors affecting sensor performance
Symptoms of P128D 2018 GMC Sierra
- Check Engine Light illuminated on the dashboard
- Reduced fuel efficiency
- Engine running rough or misfiring
- Difficulty starting the engine
- Decreased engine performance
How to Fix P128D 2018 GMC Sierra
- Begin by using a diagnostic scan tool to retrieve the trouble codes and confirm the P128D code related to the fuel rail temperature sensor 2.
- Inspect the wiring harness and sensor connectors for any signs of damage, corrosion, or loose connections. Repair or replace as necessary.
- Test the fuel rail temperature sensor 2 using a multimeter to check for proper resistance readings and sensor functionality. Replace the sensor if it fails the test.
- Clear the DTCs from the ECM memory using the diagnostic scan tool and perform a test drive to ensure the issue has been resolved.
- If the problem persists, further diagnosis may be required to identify any underlying issues such as a faulty ECM or other related components.
Cost to Fix P128D 2018 GMC Sierra
The typical repair costs for addressing the P128D code in a 2018 GMC Sierra can vary depending on the exact cause of the issue and the labor rates in your location. On average, the cost of replacing a fuel rail temperature sensor 2 can range from $100 to $300, including parts and labor. However, additional diagnostic time and potential repairs may increase the overall cost. It's advisable to consult with a trusted auto repair shop for a more accurate estimate based on your specific situation. Keep in mind that labor rates can vary between auto repair shops and may be influenced by factors such as location, vehicle make and model, and engine type.
Need more information about the P128D 2018 GMC Sierra code?
Need more information on how to fix the P128D 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the P128D 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about P128D 2018 GMC Sierra Code
1. What does the OBDII code P128D mean on a 2018 GMC Sierra?
The P128D code indicates that the Fuel Rail Temperature Sensor 2 is providing an incorrect signal message counter, which is often related to communication or sensor issues.
2. What are the common symptoms of P128D on a 2018 GMC Sierra?
Symptoms may include a check engine light, reduced engine performance, poor fuel efficiency, or difficulty starting the engine.
3. What causes the P128D code to appear on a 2018 GMC Sierra?
Common causes include a faulty fuel rail temperature sensor, wiring or connector issues, or communication errors within the vehicle's control modules.
4. Can I drive my 2018 GMC Sierra with a P128D code?
Driving with this code is not recommended, as it can lead to poor engine performance and potential damage to the fuel system over time.
5. How do I diagnose the P128D code on a 2018 GMC Sierra?
Diagnosis involves scanning for additional codes, visually inspecting the sensor and wiring, and using a multimeter to test the sensor's electrical signals.
6. How can I fix the P128D code on my 2018 GMC Sierra?
Repairs may include replacing the fuel rail temperature sensor, repairing damaged wiring or connectors, or reprogramming the engine control module if necessary.
7. What tools are needed to fix the P128D code on a 2018 GMC Sierra?
You’ll need an OBDII scanner, a multimeter, and possibly basic hand tools to replace the sensor or repair wiring.
8. How much does it cost to repair a P128D code on a 2018 GMC Sierra?
Repair costs vary but typically range from $100 to $300, depending on whether the issue is a simple sensor replacement or involves more extensive wiring repairs.
9. Could a software update fix the P128D code on a 2018 GMC Sierra?
Yes, in some cases, a software update to the engine control module may resolve communication issues causing the P128D code.
10. Is the fuel rail temperature sensor 2 critical for engine operation?
Yes, it helps monitor fuel temperature to maintain proper engine performance, and its failure can negatively impact fuel efficiency and drivability.
Discuss the causes and fixes for P128D 2018 GMC Sierra OBDII Code
Code P128D 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.