Engine-CodesFord – P1289 2009 Ford Fusion

P1289 2009 Ford Fusion Code - Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range

Quick Answer

The P1289 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that the Cylinder Head Temperature Sensor Signal is Greater Than Self-Test Range. Common causes include Faulty Cylinder Head Temperature Sensor: The most common cause of the P1289 code is a malfunctioning cylinder head temperature sensor that is sending incorrect signals to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can disrupt the signal and trigger the code, ECM Malfunction: A problem with the engine control module (ECM) can also lead to incorrect temperature readings from the sensor. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
P1289 2009 Ford Fusion indicates Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range.
Common causes
Common causes include Faulty Cylinder Head Temperature Sensor: The most common cause of the P1289 code is a malfunctioning cylinder head temperature sensor that is sending incorrect signals to the ECM, Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can disrupt the signal and trigger the code, ECM Malfunction: A problem with the engine control module (ECM) can also lead to incorrect temperature readings from the sensor.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Table of contents Created and updated by William Orellana on Sep 14, 2024
💬 Need more help? Ask Auto Expert for instant answers — it's free!
AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play

Code P1289 2009 Ford Fusion Description

The P1289 diagnostic trouble code (DTC) for a 2009 Ford Fusion indicates that the Cylinder Head Temperature Sensor Signal is Greater Than Self-Test Range. This means that the temperature sensor located in the cylinder head is sending a signal that is outside of the expected range during the self-test conducted by the vehicle's onboard computer system. The cylinder head temperature sensor is responsible for monitoring the temperature of the engine's cylinder head, which is crucial for the engine's performance and efficiency.

OBDII Code P1289 2009 Ford Fusion - Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range
P1289 2009 Ford Fusion Code - Cylinder Head Temperature Sensor Signal Greater Than Self-Test Range

Common Causes of P1289 2009 Ford Fusion

  1. Faulty Cylinder Head Temperature Sensor: The most common cause of the P1289 code is a malfunctioning cylinder head temperature sensor that is sending incorrect signals to the ECM.
  2. Wiring Issues: Damaged or corroded wiring connecting the sensor to the ECM can disrupt the signal and trigger the code.
  3. ECM Malfunction: A problem with the engine control module (ECM) can also lead to incorrect temperature readings from the sensor.
  4. Coolant Leak: A coolant leak near the cylinder head temperature sensor can affect its readings and trigger the code.
  5. Engine Overheating: Continuous overheating of the engine can damage the sensor and cause it to malfunction, triggering the code.

Symptoms of P1289 2009 Ford Fusion

  1. Check Engine Light: The most common symptom associated with the P1289 code is the illumination of the check engine light on the vehicle's dashboard.
  2. Poor Fuel Efficiency: Incorrect temperature readings from the sensor can lead to the engine running too rich or too lean, resulting in decreased fuel efficiency.
  3. Rough Idling: The engine may experience rough idling or hesitation when the cylinder head temperature sensor signal is outside the normal range.
  4. Engine Misfires: In severe cases, the engine may experience misfires due to incorrect fuel delivery caused by the faulty sensor.

How to Fix P1289 2009 Ford Fusion

  1. Diagnose the Issue: Use a diagnostic scanner to retrieve the trouble code and perform a thorough inspection of the cylinder head temperature sensor and related components.
  2. Replace the Cylinder Head Temperature Sensor: If the sensor is found to be faulty, replace it with a new one following the manufacturer's guidelines.
  3. Check Wiring and Connections: Inspect the wiring harness and connections for any damage or corrosion, repairing or replacing as necessary.
  4. Clear the Code: After completing the repair, clear the trouble code from the ECM memory using a diagnostic scanner.
  5. Test Drive: Take the vehicle for a test drive to ensure that the issue has been resolved and that the check engine light does not reappear.

Cost to Fix P1289 2009 Ford Fusion

The typical repair costs for addressing the P1289 code on a 2009 Ford Fusion can range from $150 to $300, including parts and labor. However, it is important to note that specific diagnosis time and labor rates at auto repair shops can vary based on factors such as location, vehicle make and model, and engine type. Most auto repair shops charge between $80 and $150 per hour for labor, with rates potentially higher in metropolitan areas or at dealerships, and lower at independent shops. It is advisable to check local rates for a more accurate estimate of the repair costs.

When is the Code Detected?

The Engine Control Module (ECM) detected the cylinder head temp above or below expected values

Need more information about the P1289 2009 Ford Fusion code?

Need more information on how to fix the P1289 2009 Ford Fusion code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the P1289 2009 Ford Fusion code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about P1289 2009 Ford Fusion Code

What does the OBDII code P1289 mean for a 2009 Ford Fusion?

The P1289 code indicates the Cylinder Head Temperature (CHT) Sensor is detecting a temperature signal that is outside the expected self-test range, which could indicate an overheating issue or sensor malfunction.

What are the symptoms of code P1289 in a 2009 Ford Fusion?

Common symptoms include an illuminated check engine light, engine overheating, poor engine performance, or the vehicle entering a fail-safe or "limp mode."

What causes the P1289 code to appear?

The code can be triggered by a faulty Cylinder Head Temperature (CHT) sensor, a wiring issue such as damaged or corroded connections, a malfunctioning PCM, or actual engine overheating.

Is it safe to drive with the P1289 code on a 2009 Ford Fusion?

No, driving with this code is not safe because it could indicate engine overheating, which can lead to severe engine damage if not addressed.

How can I diagnose the P1289 code on my 2009 Ford Fusion?

Start by checking for overheating issues, inspecting the CHT sensor and its wiring for damage or corrosion, and testing the sensor for proper resistance values. A scan tool can also monitor live temperature data.

Can a faulty Cylinder Head Temperature (CHT) sensor alone cause the P1289 code?

Yes, a defective CHT sensor can cause the code by sending incorrect temperature readings to the PCM, even if the engine is operating normally.

How do I fix the P1289 code on a 2009 Ford Fusion?

Repairs may involve replacing the CHT sensor, repairing or replacing damaged wiring or connectors, flushing the cooling system, or addressing any overheating issues like a failing thermostat or water pump.

What tools are needed to troubleshoot the P1289 code?

You’ll need a scan tool with live data capability, a multimeter to test the sensor and wiring, and possibly a cooling system pressure tester to check for leaks or blockages.

Can low coolant levels trigger the P1289 code?

Yes, low coolant levels can lead to engine overheating, which may cause the P1289 code to appear if the temperature exceeds safe operating limits.

How much does it cost to fix the P1289 code on a 2009 Ford Fusion?

The repair cost depends on the cause. Replacing a CHT sensor might cost $100-$200, while resolving overheating issues could range from $150 for a thermostat replacement to over $1,000 for more extensive repairs like fixing a blown head gasket.

Discuss the causes and fixes for P1289 2009 Ford Fusion OBDII Code

Code P1289 2009 Ford Fusion comments

No comments found for this page.